All Windows troubleshooting services fail to start.

That's what I see every time I try to solve anything on my computer. I did a little research and discovered that it could be where I tell the system to put its temporary files. The system works on an SSD. To try to reduce write operations frequent drive to extend his life, I configured the system to store the temporary files on a USB attached permanently. Thinking that this may help, I put directories separated on the root of the drive flash of TEMP and TMP and configured the system to write temporary files to them accordingly. I even copied read/write permissions to match exactly those permissions to the TEMP folder in the Windows directory in every detail. I configured the TMP to write to the TEMP on the flash drive to see if it makes a good. Will post the results.

Change on the configuration of TEMP folders: configuration of the system to write TMP file to the TEMP folder external as internal temperature, setting up records is not good. I even restarted the system. Nothing different happened. I don't want to have to reconfigure the system to write its temporary files on the system drive. Let me reiterate: the system works on an SSD and I try to keep to a minimum write operations.

Just figured it out. I used a virtual disk to store the temporary files on in a concerted effort to minimize operations of read/write on the SSD, the system works on. It turns out that the use of the RAM disk is causing retailers to not start. So I put the respective environment variables to the temporary directory by default.

Tags: Windows

Similar Questions

  • After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

    original title: NETBios TCPIP of missing in Device Manager

    I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7000

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The NetBios over TCP/IP service failed to start due to the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

    Hi Diddy Dell,

    Follow these methods.

    Method 1: Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Windows Firewall service does not start after the removal of Virus

    Hello

    I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
    I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
    I also tried the troubleshooting of Windows Firewall that confusedly says:
    "Windows could not start the Windows Firewall... Not fixed
    "Set permissions for the registry keys involved"... succeeded
    "Windows Firewall service is not started. Not fixed
    "Starting the Firewall Service"... succeeded
    Any ideas would be most appreciated.
    Thank you.

    It seems that I solved the problem by running this:

    that I found in a post on this thread:

  • Windows xp: services do not start the access denied error 5 or error 1068

    Original title: windows xp: service does not start

    win xp: none of my important services like firewall, DHCP or the server does not start.  Everyone says error 5 access denied or error 1068 could not start dependencies... Please help

    Hello

    1. do you have security software installed on the computer?

    Try the methods provided below and check if the problem persists.

    Method 1:

    I suggest that you disable the security software and then try to start the service and check if the problem persists.

    Note:

    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    You will also need to start long-term services and check if that helps.

    To view service dependencies, click the link below.

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/srvdep_view_service_dependencies.mspx?mfr=true

    Method 3:

    Check if the computer isn't on selective startup.

    How to configure Windows to use a Normal startup state

    Configure Windows XP to start normally.

    (a) click Startand then click run.

    (b) type msconfigand click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

    (d) when you are prompted, click restart to restart the computer.

     

  • Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

    Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

    Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

    I hope this helps...

  • The NVIDIA NDIS IO Control Driver service failed to start

    NVIDIA NDIS IO Control Driver service failed to start due to the following error: the system cannot find the specified file.

    It's the correct driver.

    Ooohhh, you see in the event Log?

    I looked in the NVIDIA forums and found this:

    http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=262&p_created=1117061806&p_sid=qP2bKYVi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiwyJnBfcHJvZHM9MCZwX2NhdHM9MCZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bmRpcw**&p_li=&p_topview=1

    I have some NVIDIA cards, but not this one, so I can't recreate and test the suggestion...

    If the RemoveNvNdis.exe does not work (I think he must disable or remove completely the service), looks like he's some NVIDIA service that tries to start when you reboot, it cannot be started for some reason any.  Looks like you don't need to start.

    If you can find it in the Services of XP, you could check the properties and set the startup type to disabled, restart and see what things look like.  (Do you know how?)

    If the mere presence of the Service in your list of Services, then you mind, you can also delete the Service entirely (I want to it later, just to be ordered if it is always hanging out).

  • What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

    What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

    Hello

    1. Since when are you facing this problem?

    2. What is the number of brand and model of the computer?

    3. have you made changes on the computer recently?

    BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
    Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

    Hope the information is useful.

  • I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

    Log name: System
    Source: Service Control Manager
    Date: 17/07/2011-21:12:53
    Event ID: 7000
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: ivan-PC
    Description:
    The BCM42RLY service failed to start due to the following error:
    The system cannot find the specified file.
    The event XML:
     
       
        7000
        0
        2
        0
        0
        0 x 80000000000000
       
        203523
       
       
        System
        Ivan-PC
       
     
     
        BCM42RLY
        %%d Ko
     
    original title: can someone please help...

    Hello

    1. you are using a Dell computer?
    2. What is the model number of your computer?
    3. don't you make changes to your computer before the problem?

    BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  • Windows search service couldn't start. The system does not have the specified path. How can I fix it?

    I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

    Log name: System
    Source: Service Control Manager
    Date: 14/08/2012 21:14:10
    Event ID: 7000
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: Owner-PC

    Description:
    The research service Windows could not start because of the following error:
    The system does not have the specified path.

    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event ">"
     
       
        7000
        0
        2
        0
        0
        0 x 80000000000000
       
        391647
       
       
        System
        Owner-PC
       
     
     
        Windows Search
        %%d Ko
     

    When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

    ---------------------------------------------------------------------------------------------------------

    (1) Windows Search is crashing or not fixed failing

    Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

    (2) search Windows does not start and gives an error message no fixed

    Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

    (3) Windows search shows no results not fixed

    Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

    ---------------------------------------------------------------------------------------------------------

    Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

    Thank you

    Hello

    Did you change to the computer?

    I suggest you to see the links and check.

    The problems with the search

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

    Improve Windows searches using the index: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

    Ways to improve your computer's performance

    http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  • VCenter 6 Services fail to start on startup

    Physical server 2012R2 6 VCenter server stopped for hardware maintenance and booted up fine afterwards.

    During the shutdown, this event was logged in the application log:

    The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    If the event is on another computer, the display information had to be saved with the event.

    The following information has been included in the event:

    Launch of VMware VirtualCenter shutdown

    the message resource is present, but the message is not in the string/message table

    After starting most of the Vcenter services had not begun, nor could they be started manually.  I it goes back to the first failure recorded in the system log:

    The VMware HTTP Reverse Proxy service stopped with the following special service error:

    Incorrect function.

    I can't start this service manually, it fails with the same error.  All other services fail with an error of dependence.

    This is very frustrating, because we have upgraded this server from Server 2008R2 for the same reason, the service would not start.  When there are Server 2008R2 his running 5.1, we tried the upgrade to 6 but it failed and we couldn't solve it, so we completely removed Vcenter and tried a new install, it didn't until I managed to 'wrong' Setup by changing the Manager of VMware vCenter workflow service to run as local system if not always failed.  We have therefore installed and running, then after the first reboot comes to fail start services!  So we fresh installed Windows 2012R2, installed VCenter without any AV or other "crust" to make sure it would work, which was the case.  Now this 'thing' just continues to fail like that once!

    DNS is fine functiong and the server has survived a number of reboots yesterday, no idea why it does not now!

    James

    Thanks to the Ram from VMware support we figured out that WWW Publishing service has been installed, the value manual start, but has been started.  The VMware Reverse HTTP Proxy service is listening on port 80, so that caused a conflict.

    This was due to an installation of Veeam One, which has been deleted, but left the installed IIS components.  Gahh!

    Required ports for vCenter Server 6.0

    How to change the TCP port for Internet Information services

    Ports: Veeam ONE Deployment Guide

    Article KB of Veeam do not notify IIS components.

    I do not think that this question concerns the problems we had on Server 2008R2, but given that this facility is gone, I can't confirm.

    Solved

    Thank you

  • Windows time service does not start

    When I try to start the time service Windows, I get a message:

    ------------------------------------------------------------------------------------------------------------

    Windows could not start the time Service Windows on the Local computer.

    Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter.  A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

    ------------------------------------------------------------------------------------------------------------

    The service is listed in the services page and entered into the automatic start mode, but does not start.   I don't have any idea what to do next... Thank you

    To resolve this issue, follow these steps:

    1. Click Start, type regedit in the Search box, and then click regedit.exe in the programs list.

      If you are prompted for an administrator password or a confirmation, type your password, or click continue.
    2. Locate the following registry subkey and click on it:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TapiSrv
    3. In the details pane, right-click ImagePath, and then click Edit.
    4. In the value data box, type the following registry value, and then click OK:
      %SystemRoot%\System32\svchost.exe k NetworkService

      Note If NetworkService does not appear in the value of registry NetworkService %SystemRoot%\System32\svchost.exe - k, the problem that is described in the "Symptoms" section may occur.

    5. Exit the registry editor and restart the computer.

      Note If you try to start the telephony service before you restart the computer, you may receive the following error message:

      Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter. A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows time service does not start. Error 1290

    I was a matter of troubleshooting time and performed the following commands

    net stop w32tm
    w32tm /unregister
    w32tm /register
    net start w32tm

    And I got an error message.  (the document is not)
    Went to services and tried to manually start the service and reveived the following message is displayed.

    Error 1290: Starting the service failed because one or more services in the same process have a service SID inconsistent type parameter.  A service with service restricted SID type can only coexist in the same process with other services with a restricted SID type. If the type of SID for this service has been configured, you must restart the hosting process in order to start this service.

    I did the steps in this post on the forum and it still does not work.     I get the same error.  I can't run w32tm.

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/6bbea43f-5575-4E78-9b52-ac766632bfc2

    Restarting the server several times without success

    Hello William Beattie,.

    1. did you restart the computer after you complete the steps?

    I suggest that you restart your computer after you complete the steps. If you already have, I suggest that you restart the computer again. Any changes made to the registry would be effective only on a reboot.

    I also suggest that you perform the same steps and check the registry again and restart the computer.

    Once you restart the computer, try to start the service and check if you are able to boot.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • The Windows Audio Service does not start

    I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

    Hi JamesSimpson11759,

    ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

    ·         Did you do changes on the computer before the show?

    I suggest you to run the Microsoft Fixit and check if the problem still persists.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    You can also view the article mentioned for more information:

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Let us know the results.

  • Windows Defender service does not start on Windows 7

    On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!
    I can't remove Defender another upodate no longer works.

    Someone knows a solution?

    Hello

    Go to configuration-system board and security - administrative tools - services. Find the windows defender and double-click it. Then choose, auto start option, click on apply. turn it back on.

    In addition, you can read about trouble of Windows defender:

    http://support.Microsoft.com/kb/931849

  • Vista - Error Code: 0 X 80072726 (Windows Update Service does not start)

    When I run Windows Update it says that it is impossible to connect to the service because the service is not running. When I go into the Services to start the Windows Update service, it says: Windows could not start the Windows Update service on Local computer. Error 0 x 80072726: an invalid argument was supplied.

    I am running Vista - 32 SP2, Mcafee antivirus (day and daily scanned), IE v8.0.6001.18904

    Everything was working fine a week ago.  The only thing I changed on my PC since it is that I have installed Bioshock 2 and Games for Windows Live.  Uninstalling these applications has not solved the problem.

    1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

    2. manually & repeatedly updating the McAfee application until you get a invite "no update more".

    3. components of Windows Update (new) reset: http://support.microsoft.com/kb/971058 [access KB971058 via IE8 only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]

    4. restart & test.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • HP Pavilion DV6-3060SA: HP Pavilion Mouse button Pad delivers

    Hi, I got a HP Pavilion 15.6 & quot; DV6 3060sa laptop model and the mouse pad stopped working... Well it's works sometimes other times it does not work... I know it's a hardware failure that the keyboard has stopped working, I replaced it and it's p

  • Please can someone explain how this circuit works?

    I was digging through some old files left here by a former employee and found this.  There is a text file with it that said it was a temperature alarm that was supposed to have a green light when the temperature was between 50 and 100, but a red ligh

  • I can really play a WAV file, that I have loaded on my Clip +?

    Hello, I can't tell clients and/or manuals if the WAV files are supported and can play on my new Clip +. I load a wav file, but I can't seem to play. I went to the folder view and tried to play, but nothing happened. Is picked up, and, if so, do I ha

  • VPN IPSec/SSL VPN concentrator

    Hi all Can a simple question, I activate both IPSec and SSL VPN on the same hub box? Kind regards MAK

  • Why the font sizes are so limited in the E10 Editor?

    No one knows why the font size is limited to 26pt in the enamel of the E10 and editor of landing pages? I have this record on the exchange of ideas, but hope someone can explain the reason for the limitation.Thank youKrista