Allow a user to access beekeeper
HelloI try to delegate a part of administrative tasks, but I can't understand the role/right rule giving access to the beekeeper for a user.
Any clue?
Hello
See the section "Managing Oracle Beehive Access Control" of the guide admin somewhere like here :
Specifically, the WEBADMIN_USER privilege allows to connect to the web administration interface (but not do anything once you're connected).
Kind regards
Richard
Tags: Fusion Middleware
Similar Questions
-
Mac on Windows SMB shares - IDLK files that allows multiple users to access the same file endangered
Hello
We have an agreement with Adobe volume licensing and have about 16 licenses Adobe CS6 all used on Mac computers. The network focuses on Windows servers and actions that Macs connect to the through an SMB connection on the server. The question we have is that when you open an InDesign file, sometimes it will not create an IDLK file (or sometimes it will create one, but it will disappear a few seconds later) and it allows several people to view the same file at the same time. Of course two or more people working on the same file can, will and caused problems with crash documents without knowledge to do so.
Someone else has experienced this or have any ideas as to what might help us solve this problem?
Thank you
There will be no file locking for an earlier version, until it is saved as a
CS6 file.
For the rest, this looks like a problem with permissions on the server.
-
ID that allows multiple users to access the files at the same time
I often share files on my Mac with another Mac in my studio. In the past if someone tried to open a file I was using would give them a warning that the file was opened. Now for some reason, it allows both us to have the file open and work on it and seems to give priority to the person who opened the modified file. If they make a change and save it, its OK, if I make a change to it, the program says it needs to close and then freezes.
Not sure when this happened, but I'm guessing it's something to do with the update to Lion, because that's when I started noticing the issue. We are both short CS5.0
Other people find this question, and y at - it a setting to stop it. We try to avoid never work on the same file, but due to workflow in the studio, it could happen accidentally and could cause major problems.
There was a bug in the initial release of CS5 that allowed this under certain conditions. Update 7.0.4.
-
It's driving me crazy. Whenever a user attempts to open a program already installed, nothing happens. The event viewer displays the event id 882. The laptop is running windows 7 home so it doesn't have the local security policy that I can change. How to disable this check or allow the program is accessible by standard users?
I solved the problem. I downloaded and installed gpedit.msc following the instructions here - http://www.askvg.com/how-to-enable-group-policy-editor-gpedit-msc-in-windows-7-home-premium-home-basic-and-starter-editions/
Once this was done, I was able to change the policy to allow the user to access the new application. -
I am currently using windows vista ultimate 64-bit with an installed nvidia geforce 8800 gtx card. I'm the ADM on the machine, with the standards users who connect it. My account of adm does not have the problem. I'm trying to find a way to allow standard users on the machine to have the ability to change the ppp settings.
The path of the file is C:\Windows\System32\DpiScaling.exe
I tried to use the solution listed on this site: http://blogs.techrepublic.com.com/window-on-windows/?p=635
and used the Application Compatibility Toolkit. I used a lot of different options, the 32-bit version, 64-bit, different boxes, without success. When you click right on the file properties and click on the Compatibility tab, it says:
Cannot be set on this program compatibility modes because it is part of the Windows version.I have a standard users also granted full control of the executable, and if the logged-on user account, he got always invited him to enter the administrator credentials. I understand that this only gives the user access to the file and not what the file does.
I need to find a solution to allow standard users on the computer to change the DPI settings without the need of the admin password. While looking for solutions here and on the site of regular microsoft (support.microsoft.com) support, all I could find are methods that disable the guests of UAC elevation and ways to disable UAC completely. http://social.answers.Microsoft.com/forums/en-us/w7security/thread/0364515a-301e-47C5-AF99-39347b83c6b4-je don't want to do that. I even tried and the standard user has always invited to enter an admin password. I don't want to disable UAC or the guests of elevation, surprisingly these guests don't mind. The computer is set to high resolution and need to continually change the DPI setting to enable the second monitor (my HDTV) text output in a format that is clear and correct. The reason why we have change back is because the cursor of the mouse in the PC video games being played here on disappears when the DPI is set to what higher than normal / default. So before any game is played, the DPI settings in windows settings must be changed to the default / normal.
Since I was the user only administrator on the machine, I am concerned when other users would like to play their games. but can not, because I am not present. I want to be the only Admin account on the machine. Bad things tend to happen when I allow other users are administrators on the machine.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the security of Windows Vista on TechNet. Please ask your question in the TechNet forum.
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Guest user can access the system tools?
Start menu > all programs > Accessories > system tools
This allows the user access to computer, control panel (and running and same command prompt), although I selected "don't display this item" through properties > Start Menu > customize. Is there something I don't understand? I don't want a guest user to gain access to ANY 'system tools '. How can I accomplish this?
Hi Jim,.
Thanks for posting your query in Microsoft Community.
The guest account providing minimum privileges to perform tasks not requiring administrative privileges. People using the guest account cannot install software or hardware, change settings, or create a password. Because the guest account allows a user to log on to a network, browse the Internet, and shut down the computer, you must disable the guest account when not in use.
You can open the command prompt in elevated mode (with administrative privileges), which is actually necessary to run multiple commands that can affect your system. If you use Windows 7 Professional or higher edition, group policy can be edited privileges for the guest account. To learn more, you can re-post your query in the TechNet forums calling for changes in the group policies for the guest account.
For more information, see:
Enable or disable the guest account the
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Allow administrative users to update applications
I have several new computers running Win7 Pro using the CAD and the standard name of user/login prompt. Users run in standard user with no administrative privileges accounts. Users get pop ups of various applications that want to run updates to day, but when the user selects the he is prompted for an administrative password. Of course, they cannot continue. The two main offenders are currently Java and adobe Acrobat. Is there a way to allow administrative users to run software updates to the machine?
I tried to add users to the power users group, but that did not help.
My current idea is to create an admin user and set it so that the user can not connect interactively, but can be used to authenticate the update.
You can't do that. If find you a hack to allow them to you have given the same level of access as an administrator and undermined all chances to avoid to install malicious software or dirt otherwise upward from their computers. If they can install the software in ProgramFiles or % of windows that they own the computer.
Instead, set up an automated system to deploy software and updates. System Center Configuration Manager is probably overkill for your network, but there are several affordable tools of the 3 parties who could help with deployment and maintain applications. Http://www.kurtdillard.com Kurt Dillard
-
AnyConnect users can access internal network
Hello!
Just sat up a new Anyconnect VPN solution for a customer. It works almost perfect.
Anyconnect users can reach the internal network storage. The anyconnect users can access the internet, but nothing on the network internal.
(Deleted all the passwords and public IP addresses)
ASA 4,0000 Version 1
!
ciscoasa hostname
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address
!
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 213.80.98.2
Server name 213.80.101.3
network obj_any object
subnet 0.0.0.0 0.0.0.0
access-list SHEEP extended ip 192.168.9.0 allow 255.255.255.0 192.168.9.0 255.255.255.0
AnyConnect_Client_Local_Print deny ip extended access list a whole
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
pager lines 24
Enable logging
logging of debug asdm
Within 1500 MTU
Outside 1500 MTU
mask 192.168.9.50 - 192.168.9.80 255.255.255.0 IP local pool SSLClientPool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.9.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.9.2 - 192.168.9.33 inside
dhcpd ip interface 192.168.9.1 option 3 inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.3046-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal SSLClitentPolicy group strategy
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
value of server DNS 192.168.9.5
client ssl-VPN-tunnel-Protocol
the address value SSLClientPool pools
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol ikev1, ikev2 ssl clientless ssl ipsec l2tp client
VPN Tunnel-group type remote access
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:6a58e90dc61dfbf7ba15e059e5931609
: end
Looks like you got the permit vpn sysopt disable to enable:
Sysopt connection permit VPN
Also remove the dynamic NAT depending on whether you have already configured under the NAT object:
No source (indoor, outdoor) nat Dynamics one interface
Then 'clear xlate' once again and let us know if it works now.
-
Auth of remote VPN through LDAP allow all users!
Hello
I have 5505 firewall and security license. I have configure remote VPN on firewall through CLI with the commands below. Remote VPN works well, but the problem is, it allows all remote VPN users. I need to restrict remote VPN access bit user, I need to configure via CLI, I don't want to go through ASDM, can someone help me with CLI?
ASDM I can able to perfom below things I'm not able to perform through CLI
Configuration-> access to the network (Client)-> dynamic access policies
Through ASDM I'm able to set the VPN users are allow to remote VPN access, how to set up same thing through CLI
Here's my CLI:
LDAP attribute-map CISCOMAP
name of the KFG IETF Radius-class card
map-value VPN CN = VPN, DC = domain, DC = com noaccess_pri
map-value VPN CN = VPN, DC = domain, DC = com noaccess_bk
map-value VPN CN = VPN, DC = domain, DC = com splitgroup_pri
map-value VPN CN = VPN, DC = domain, DC = com splitgroup_bk
AAA-server ldapgroup protocol ldap
ldapgroup AAA-server (inside) host 10.1.10.5
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password Inf0rmati0n1
LDAP-connection-dn cn = VPN, dc = domain, dc = com
microsoft server type
LDAP-attribute-map CISCOMAP
internal noaccess_pri group policy
attributes of the strategy of group noaccess_pri
VPN - concurrent connections 0
output
internal noaccess_bk group policy
attributes of the strategy of group noaccess_bk
VPN - concurrent connections 0
output
internal splitpolicy_pri group policy
Protocol-tunnel-VPN IPSEC l2tp ipsec
tunnel-group splitgroup_pri General-attributes
ldapgroup group-LOCAL authentication server
internal splitpolicy_bk group policy
Protocol-tunnel-VPN IPSEC l2tp ipsec
tunnel-group splitgroup_bk General-attributes
ldapgroup group-LOCAL authentication server
Thank you
Abhishek
Hello
You cannot configure the DAP via CLI Protocol because the configuration is saved in a file dap.xml and is stored in flash of the SAA.
You can configure the DAP protocol using the following link:
http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml#T4
Also note that the link mentions the following:
Note:
The dap.xml file that contains the attributes of selection policies DAP, is stored in flash of the SAA. Although you can export the file dap.xml out, the edit box (if you know about the xml syntax), and re - import again, be very careful, because you might ASDM stop treatment of DAP files if you have misconfigured something. There is no CLI to handle this part of the configuration.
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this message as answered if you feel that your query is resolved. Note the useful messages.
-
How to create the user to access the web console to Vcenter Server Appliance
The default console is located at https:// < ip >: 5480
For VC apparatus, the user who has access by default is root. Can I create another user level system and grant him access to the console?
I tried to create a user by useradd m consoleuser and changed the passwd... However, I am not able to connect to the web console with this user...
On a similar note, can I give access to the console to a user of the AD?
Concerning
Girish
It is probably not supported by VMware, but it seems they're locking access web console rules of pam.
You must modify the /etc/pam.d/vami-sfcb file to change the reading of the line "auth required pam_succeed_if.so uid eq 0' to succeed/deny rule change.»
For example, you can change the line to read "auth required pam_succeed_if.so uid > = 0' and then allow any user with a UID of 0 or more to connect to the console of the web."
-
Type of transaction SOUL in the management of users (additional access authorization)
We are looking for use the feature "Request additional access" self-service in the user management to allow existing users to request additional responsibilities (we're on EBS 12.1.3, all user access is entirely in EBS without integration of SSO).
I was able to set up so that it works very well if no approval is required for the new responsibility, but we would also like some requiring approval of line manager/supervisor until responsibility is granted - documentation related to the management of users tells us that we can add a Type of Transaction SOUL in the field "Type of Transaction for approval" when creating a new registration process , but nothing more than that. I wonder if someone could point me to any more detailed documentation that would help us to work on the question of whether we can use an existing transaction of the SOUL - or how to create a new one for this particular task?
Thank you.
Andrew
In case anyone else has this problem in the future, I connected an SR and support pointed me to a really useful note on My Oracle Support on how to do
How to create the Type of Transaction for approval of the SOUL. B or higher? (Doc ID 420387.1)
-
Allowing a user to connect through SSH
I need to allow a user (not root) to connect to a server ESXi 4.1 via SSH.
The ESXi server is not a member of Active Directory.
I have read the article on the http://kb.vmware.com/kb/1024235 page and created a new user.
Then I opened the inventory, choose 'Add Permission' and adds the new user with the role of administrator on all of the inventory.
When I try to access it via SSH using the user name and the password of the user I get "access denied".
I think I missed a relevant step because if I open the inventory again and select ' add permission "the list of users with the privileges granted is empty and I don'tI do not see the user in the list of users with permissions."
However, if I use the vSphere client I locon as a new user and perform all the administrative tasks of ther.
- What step am I missing?
- As my user should only use SSH to perform actions on a given virtual machine, I can great administrative rights only for the virtual machine without rights to granding to all inventory?
- Is there a more detailed documentation for referred to?
Concerning
Marius
Why not use powercli to create a snapshot of the vm? http://tech.mikeal.com/Blog1.php/2011/01/21/VMware-PowerCLI-scripts-delete-all-snapshots-create-new-snapshots
- What step am I missing?
-
I want to allow a user to enter a beginning date and to set the period they want to find records of members who have joined some end dates. Funny, it is... I got half of the working time. For example I have 4 folders between 26/10/2005 and 01/08/2006. When I enter 01/01/2005 as startDate and endDate 31/08/2006, I get 4 records. However, if I change the endDate to 09/01/2006 I get all records in the database! ??? Why is this? I can't get my head around it!
Here is my code:
First the code for the form for the user to input search criteria on:
< html >
< body >
< action = "FORM memberJDateSearch.cfm" method = "post" > "
< P > start date: < input type = "text" name = "startDate" >
< br > End Date: < input type = "text" name = "endDate" >
< input type is 'reset' value is 'Clear' >
< input type = "submit" value = "Submit" >
< / MAKE >
< / body >
< / html >
Pretty simple. Now, the code of the page process and display:
< html >
< body >
< cfquery "memberJDateSearch" datasource = name = access "jpkelle2" >
SELECT *.
Members
WHERE ((joinDate BETWEEN #CreateODBCDate (startDate) # AND #CreateODBCDate (endDate) #))
< / cfquery >
< table border = 1 bgcolor = "beige" cellpadding = '3' cellspacing = "0" >
< b >
< /Th > < th > Member ID
Name < th > < /th >
Sex < th > < /th >
< th > Birth Date < /th >
Address < th > < /th >
< th > Email < /th >
Date < th > joined < /th >
< /tr >
< CFOUTPUT Query = "memberJDateSearch" >
< b >
< td > < center > #memberID # < Center > < table >
< td width = "15" > #forename # #initial # #surname # < table >
< td > #sex # < table >
< td width = "10%" > #disp('#dob#') # < table >
< td > #address #, #town #, #county #, #postCode # < table >
< td > #email # < table >
< td width = "10%" > #disp('#joinDate#') # < table >
< /tr >
< / CFOUTPUT >
< /table >
< hr > < p > end of the list of members. < /p >
< / body >
< / html >
any ideas? Please help me.Try formatting your dates first (before the call to CreateODBCDate). I just tried this on my test page and it worked correctly. I removed calls DateFormat, now dates in your format, and it didn't work. See if something like the following will help you:
SELECT *.
Members
WHERE ((joinDate BETWEEN #CreateODBCDate (startDate) # AND #CreateODBCDate (endDate) #))
-
Users can access Essbase 7.1.3
Hi all
We use 7.1.3, essbase and we want to define the access of the user like this:
1. the user have access to only some of the all calculation scripts
2. the user has read/write access to the data of the current year, period
How can get us this done?
Our problem is
1. If we give 'calculation' access to a user and assign calc scripts to the user. the user sees only his scripts as expected, but he is able to read/write data in the database. Even we have filters assigned to the user. Is this a bug?
2. If we give the 'designer' access to a user, the user is affected by the assigned filter. but he is able to perceive all the script maps calc...
Thank you for your advice. Thank you in advance!That's how it worked since I started working on Essbase in version 3. The user will be allowed to lock parts of the database that enables its filter. But can can calculate anything in the database that is in a calculation, to which he has access. It's funny, loading rules comply with the access to the filter.
-
I can't open my Dungeon of docs word any error message "user lacks access privileges.
I can't open my imported word docs Dungeon receive an error message 'user lacks access privileges' ideas of what she may be contacting Apple and they tried a lot of things and tell Microsoft that the docs are corrupt and nothing wrong with the word 2016.
More info, please.
When you say that it is "any word docs", do you mean another user on the same Mac, another Mac, an earlier version of Mac OS X, an earlier version of Word, another type of computer, from another type processor, or something else?
These documents are currently stored in your Documents folder, into another directory user on an external drive, on a server, or elsewhere?
You do it on El Capitan? What version of 10.11.x?
Your copy of the word 2016 is perfectly up to date?
Maybe you are looking for
-
FaceTime grab CPU &; battery
Hello My Facetime recently developed a problem. He nearly took the CPU performance when you use a video call as pictured and cause noise fan. My Mo is Air mid 2013 version with a Capital of El updated a few months ago, but the case has happened these
-
The WiFi of my Airport is very ready and cut on the occasion. Do I pay to correct the situation?
-
I'm transferring my files to an HP laptop to a Dell because the crushed HP desktop computer. I installed Firefox 8 in the Dell computer (I got the Firefox 5 - I believe - in the HP). I'm looking for the old bookmarks file in the old computer, but I c
-
HP COMPAQ DX2400 FORMAT MICROTOUR: DEVICE DRIVER?
Hello and thank you, I inherited a model above for a friend and he has deleted his personal affair, I installed some of my favorite softwear but found some of them would not work properly, I discovered some the device drivers have had a yellow?, inde
-
Hur jag som raderats bilder hittar permanent?
Hur jag som raderats bilder hittar permanent? behover help som f * king God. Bilderna fan allt kan help.