HP COMPAQ DX2400 FORMAT MICROTOUR: DEVICE DRIVER?

Similar Questions

• HP Compaq dx2300 format microtour missing PCI Simple Communications Controller Driver (Modem?). WinXP

  Hello

  I had to restore a HP Compaq dx2300 format microtour Win XP system from the recovery partition.

  Everything seemed to work fine except no driver found for PCI Simple communication controller.

  There was no modem in Device Manager.

  I downloaded the driver for the modem on the HP website, but it will not identify / install the driver.

  Remains of the error. (no driver found for PCI Simple communication controller.)

  Any Suggestions?

  Thanks in advance.

  My apologies to Paul.

  Your label says HP Expert 2014. I made a mistaken assumption that you were part of HP.

  I agree that it probably isn't a standard part of HP. I also looked at their specs and the database driver.
  I tried to use never version on the HP web site for their standard model for Agere 56 K PCI Modem driver. He did not consider it as one appropriate driver.

  However, I could only identify a compatible driver using a new pilot identifier utility (new to me at least).

  It seems to work.

  I think I'll keep it in my toolbox in the future.

  http://www.driveridentifier.com/

  My apolgoies once again and thank you for your efforts.

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• HP Compaq dx2300 format microtour CPU Upgrade requires the bios update

  Hey, my Hp compaq dx2300 format microtour came with a core2duo E4400 processor, I had an E8400 CPU because they share the same socket LGA compatible on the motherboard and it fits perfectly, only the pc does not start, then read around some sites say it is supported by my MSI motherboard A 0, 90, others only reported up to E6700 what I don't understand, is why it wouldn't work? I BIOS v1.14 (latest news on the list of dated drivers '2008'!) and can't seem to find a solution for this, please tell me what to do I don't want to be stuck with a CPU, I can't use cause it isn't a way to map mother read it, thanks in advance!

  Hello:

  Unfortunately, you're stuck with an E8400 which won't work in this PC.  See page 4.

  Here are links to the quickspecs for your model.

  http://h18000.www1.HP.com/products/QuickSpecs/12668_na/12668_na.PDF

  An E8400 processor will not work in any case with x chipset Intel 94 or 96 x chipset.

  In order to run an E8400 into a PC, there need an Intel 3 series chipset or 4 of the series.

  Of course a processor must adapt to an outlet, but is not the only criterion needed to make it work.

• 15 - s006tu of Compaq Notebook pc: PCI Device driver not found

  In my laptop newly bought 'HP COMPAQ laptop 15-S006TU', I installed Windows 7 ultimate OS. PCI Device driver and driver Bluetooth are not found. They are in yellow color in the network adapters. I tried many things to update drivers for my pc and online but no use. It shows driver not found for your device. How do I solve this problem

  Hello:

  This bluetooth driver should work...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

  Card reader (PCI Device):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140783-1&cc=us&DLC=en&LC=en&OS=4063&product=7308927&sw_lang=

• HP Compaq d220 format microtour Desktop PC Ethernet Controller does not work?

  Hi, I just reinstalled my microtour HP Compaq d220 with Windows Xp Professional desktop PC and I downloaded the chipset in the system first and then audio driver and the driver of network here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

  I went into Device Manager but my ethernet controller was still in others? My internet was not working and I can't access my router? I don't what to do. I lost all my Sunday looking for answers. Can someone help me out here?

  Message edited by foos-special on 22/11/2009 23:23

  Hello.

  Today, I had this same problem with a d220 MT (in fact, I found this entry when you seek a solution ), and the fix was so simple it was embarrassing. The driver download sp25326.exe install just the installer. After you run it, you must go to c:\swsetup\sp25326 and run setup.exe. After that, your card should work. at least it worked for me.

  I hope this helps.

• Compaq dc5800 format microtour: Compaq dc5800 format microtour - 4 TB hard

  I bought a 4 TB harddrive and installed in a HP Compaq dc5800 microtour.

  The drive is recognized by the computer, but in the BIOS indicates that the capacity of the disk is just 1.8 to.

  I checked all BIOS storage options and doesn't see any clear way to solve this problem.

  Is it possible to do?

  Hello:

  If you use it as a main drive, it won't work because your PC lacks a UEFI BIOS.

  The maximum size of hard drive, you can install a HARD primary as 2 TB in your model drive.

  If you use it as a secondary disk (storage), you should be able to format in GPT to use all 4 to.

  Read this white paper from HP on TPG...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3658081&docid=emr_na-c02826744&docLocale=en_US

• HP Compaq dx2300 format microtour

  I have a HP Compaq dx2300 microtour with the following BIOS:
  Phoenix Technologies, LTD MS7336 1.08, 25/05/2007

  I want to upgrade BIOS, but apparently there are no BIOS version unless
  you are running Windows 2000, XP and Vista.
  Since I have Windows 7 installed and working, can someone point me to an update of the BIOS
  It works on my computer?

  Thank you.

  Xlator1, welcome to the forum.

  The only way that you can update the BIOS is to return the computer to its original configuration. including the operating system.  I don't think that HP will be an update of the BIOS for Windows 7, if there is not a list currently.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pro 3500 format microtour PC driver - graphics ((xp))

  Hello guys
  I bought a HP 3500 M T
  But because of my work and programs need to use XP Service Pak 3
  But I'm having a problem with the definition of the screen never before loading and experience you do I do to download a file driver - graphics for Windows 7 32 - X and works on XP Normal
  XP x 32
  Excuse the language, I'm from Egypt and use Google translation

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdHome/?sp4ts.Oid=5270850&spf_p...

  Hello:

  It depends of what the PC processor, and if she has integrated Intel graphics card, or an add on video card.

  If your 3500 has a i7 from Intel or i5 processor and integrated graphics card Intel HD then the graphics drivers XP should work.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22642&lang=eng&OSVersion=Windows%20XP%2032-bit%20Edition * & DownloadType = drivers

  If your PC does not have an add on video card or the processors above, I would need to know this information to know if there is a correct XP driver.

• HP Compaq dx2200, format microtour

  When I turn on the computer I get a message that the computer was turned off for a reason any and enter one of the three messages as safe (one of three messages) mode when clicking on safe mode, all I get is blue screen of Windows XP with the wriggles along.   I had installed Skype a few days before - the computer worked after that.    What should I do next?   My grandson wants out of my hard drive to put all of my data and photos on this computer, reinstall windows and then transferring into my computer.    It would be a good idea?

  Hope someone can help and will be able to understand my description of the problem.

  I'll click on the Kudu when I can find it.   Thanks for the email, old_geekster.    The other two choices were: Safe Mode with networking Mode and safe mode with command prompt.

• HP Compaq dx2400 microtour format: video card - motherboard compatibility

  Hi, first I want to sorry my bad English because I'm Romanian.

  My question is: I have a HP Compaq dx2400 microtour and I want to know if AMD R7 240 1 GB ddr5 Sapphire, it will be able to run on my pc.

  Thanks in advance!

  Stefan, welcome to the forum.

  I was able to understand exactly what you need.  Your English is no problem.

  Here is the Service reference Guide to the computer.  It will give you all the information you need.  On Page 104, it has information on the power supply unit (PSU).  It is 300 w which is not enough to feed the video card you want to buy.  Also, I think that the card requires UEFI in the motherboard instead of a standard BIOS.

  Your best options would be to contact the manufacturer Technical Support to see what they have to say.  If this card will not work, they should be able to tell you which of their cards will work.  They will need some information in the document I have provided.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Compaq DX2400 microtour - update of GFX card format.

  Hi guys

  I recently bought a preowned Microtour HP Compaq DX2400 Business and upon receipt of that I made a few additions to his card, I added an another 2 GB of RAM to bring to a total of 4 GB. I have also consulted with the pdf for this product manual and found a list of support for the GFX cards and I bought a pre owned to ATI Radeon HD 3650 (512 MB DH) PCIe x 16 which all together worked very well and I was extremely happy.

  I write today to ask if there is another (preferably 1 GB) GFX cards that work with the system or am I limited to the list in the manual? If it's just a case of choosing a new PCIe x 16 card then I have one waiting to go, but I wanted to see HP and its community first.

  I understand that this age and spec PC will struggle to play current games but I'm looking for abit more grunt for the games I play now.

  Here is the link to the mentioned user manual.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04290832

  Thanks in advance for any information.

  Concerning

  You are the very welcome.

  If you want to try your luck on a map more robust (probably shouldn't be a problem on a PC with a 300W power supply, try a card of 1 GB Radeon HD 6570.

  It is a 128-bit card that is better than a 64-bit card.  It will establish to 60W of power vs less than 30 for the HD 6450.

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.

• GP Compaq 6005 Pro format microtour: Reinstall a computer format microtour HP Compaq 6005 Pro

  Hello

  I want to install Windows 7 on several Compaq 6005 Pro format microtour (VN797ET).

  I have product keys Windows 7 Pro to the labels on the PC, it also says OS: Win 7 to XP Pro.

  But the keys to Windows 7 should work for Windows 7 Pro?

  How can I get a W7.iso that runs on the PC. I tried the Microsoft Download page:

  http://www.Microsoft.com/en-us/software-recovery

  When I enter they key I get the following error;

  "The product key you have entered seems to be for the software that came preinstalled on a device. Contact the manufacturer of the software device for recovery options. »

  Can I download a HP image somewhere? These keys function with a generic W7 iso (sp1)?

  Hello:

  You will need to order a set of HP for your PC recovery media.

  If you live in the USA/Canada, call this number... 1-800-334-5144

  If you do not, I have this old list of numbers of support by country.  I don't know if all the phone numbers are more valid.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/business_desktops/6005us_332630_007.PDF

  Have the serial number of one of them handy to give to the customer service rep.

• HP COMPAQ 6000 PRO format MICROTOUR: busco una change bios del PARA MI PC

  I HAVE A PC HP COMPAQ 6000 PRO FORMAT MICROTOUR SERIAL NUMBER 2UA01622NL SOLO QUIERO ADDITION DEL BIOS POEQUE NO. ABRE UNA COMPUTADORA PARA CONFIGURARLA GRACIAS.

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding