Allow the control network agent to connect to a database as sys with no listener

Similar Questions

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• Able to detect the wireless network but cannot connect

  Help, please!

  I have a HP Pavilion DV6 using Windows Vista 64-bit.

  My network wireless adapter intel is able to detect wireless networks three on my College campus.  I know that these networks is currently (I can access it on other devices and my suitemates can view them on their laptops.

  When I double-click a network dialog box appears and informs me that the laptop is currently connected to the network.  After about 30 seconds it says it is unable to connect and an opportunity to try the troubleshooting options (which, alas, never work).  I recently tried to download the latest drivers for the network adapter, but also, it does not work.  The adapter is turned on via the switch on the keyboard and the HP Network Assistant.

  What should I do?

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same issue then you need to call HP tech support and get the replaced part.

• MBA on the same network arrested in connection and iMac

  I got an iMac and MBA on the same network more than 5 years. Today, he ceased to recognize each other. The MBA, the iMac is listed in the Finder window, but when I click it, window is empty and I have no Conneded. I click on connect as, again and again, and nothing happens. On the iMac, the Finder window list also the MBA and unrelated. Connect as > enter the name and the password. I copied the name of iMac on name and entered the password (even, 10 years), and I get a stirring display.

  That is what it is? Thank you

  Hello ArmandoWyo,

  Thank you for using communities Support from Apple. I know have a problem using your computers Mac 2 together, it's not what you expect. These computers have worked together on the network before, good news as this should be as easy as some basic troubleshooting or setting up sharing on the network again. The following articles will help to solve your problem:

  OS X El Capitan: connect to shared computers and servers for files on a network

  OS X El Capitan: If you do not find the computer you want to connect to

  See you soon!

• Acquire the msg network but cannot connect to the internet?

  I Tower IBM 'Think pad' and when I try to connect to the internet, it is said ' acquisition of network and it connects don't not in the network, the bars keep fluctuating between 2-4 bar, but still won't connect, a 'fix' I tried it same thing... will to "acquire the network but does not connect."

  What seems to be the problem, what do you suggest to please. It was working fine until last night.

  Have you tried restarting your wireless router? It off for a few minutes, then turn on and wait a few minutes and then restart your computer.

  I hope this helps.

• Unable to connect to the home network after you connect to the internet at Duke University

  Noteboook W7 Pro cannot reconnect to the network after you connect to the internet as a comments/visitor at Duke University.  The Duke system is predatory changes to my computer, and I can't fix it with the restoration of the system.   The home network is a Windows workgroup with most XP, no password only required machines.  This has happened in the past when the guest was an XP machine too, and then he had something to do with the DNS settings.  Cost me a lot of time and anguish and loss of productivity.

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you able to connect to the internet?

  See the help article and check if it helps.

  Method 1

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_2

  Method 2: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know the status of the issue.

• Why do block/allow the python network connections?

  Whenever I restart my computer, I get a popup window asking me to deny/allow incoming network connections to python.app. I checked my firewall settings and they are configured to allow incoming network connections. How can I fix so I did not have these messages?

  Create a new account and start in this account. If the problem persists, it may be another application is triggering demand or maybe it's that the firewall application is causing the problem. Function where and how you use your mac OS firewall may not be necessary.

  See the following topics

  http://www.thesafemac.com/do-i-need-a-firewall/

• Wireless devices can see the wireless network but not connect

  Can someone please help?  I have a WRT54GS v2.  My wired computer accesses the Net fine, and I can see MAC address, IP address, DNS, subnet mask, default gateway in the navigation of the linksys software. The devices can see the network with strong bars but can't connect.

  Help!

  Thank you

  Yes, I tried all of these suggestions before posting and thank you for the reply.  I even called Comcast, my cable provider, in despair attempt to resolve.  Of course, they were no help, but it didn't end up being a problem, with what they should have helped me.

  By simple trial and error for several hours, I discovered that the domain name required to be filled in the first Panel of the router Linksys software.  The domain name resulted in the status panel but needed to be included in the initial group.  The forums I read had informed that some cable companies require the name of the computer and the domain name is filled and others not.  Obviously, if Comcast domain name must be filled out, but not the name of the computer.

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• There is the Red Cross in the icon network and cannot connect to the internet, to detect any wireless network.

  * Original title: Internet connection problem

  It has red cross standing in the network icon and I can't connect to internet via USB modem or WiFi. It is also not detect any wireless network.

  Aalishan salvation,

  -Have there been recent changes made on the computer before the show?

  This problem can result from network card or driver settings.

  I will only refer to the suggestions provided by Gokul T on May 14, 2010 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-is-unable-to-detect-any-wireless/9a7386ba-7775-4039-940b-20fa537c6084

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, see the links.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Keep us informed on the status of the issue.

• 2 groups of ESXi allow the same network for vmotion?

  I have 2 groups in the same data center.  The first is a cluster of ESXi 4.1 of 8 guests and appx 120 VM.  The other is a cluster of ESXi 4.1 6 hosts and appx 100 VM.

  On the servers in the cluster first, I mgmt interfaces on vlan 5 and vmotion interfaces on vlan 6 (different VLAN = recommended).  On the servers in the cluster 2, they were Setup with the interfaces of mgmt and vmotion interfaces as well on the vlan 7.  I want to correct this by moving vmotion to one vlan different.

  Is there a reason that I should not use vlan 6 for vmotion for both groups?  Or would it be better to have each cluster on its own vmotion vlan?

  Thank you.

  Yes. We have 9 clusters in two different vCenter, and they all use the same VLAN for vMotion.

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

  I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

  Deactivation and reactivation of these two connections: FAIL.

  "Diagnose and repair" on the two connections: FAIL.

  Under dynamic I.P. type to static/static to the dynamic: FAIL.

  Uninstalled all network via Device Manager devices, then restart: FAIL.

  Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

  The command ipconfig/all text follows:

  ----------------------------------------------
  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Brooklyn's>ipconfig/all

  Windows IP configuration

  Name of the host...: Brooklyns-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-31-87-95
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-4E-2E-F7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
  B4B}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
  0FA}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Brooklyn's >
  --------------------------------------------------

  Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

  I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

• Control point for endpoint connect is compatible with Windows 8.1?

  Original title: CheckPoint endpoint connect

  Hello

  I'll do the upgrade of Windows 8 Pro for Windows Pro 8.1.

  By choosing the upgrade path that allows me to keep all the files, settings and applications, it shows that the only application that I have to uninstall will be Checkpoint Endpoint Connect (which currently runs under Windows 8 Pro).

  At all known installation CheckPoint EndPoint Connect on Windows Pro 8.1 and installed successfully?

  Thanks for the reply.

  I've went ahead with the installation of Windows RTM 8.1 and took the risk that Checkpoint would not be compatible.

  I was able to uninstall Checkpoint, as part of the upgrade of Windows 8.1 window and subsequently install Checkpoint endpoint connect successfully.

  Therefore, I am happy to say that for our Organization and our version of the control point, it is looking like it is fully compatible with Windows 8.1.

• Internet connection for the second computer on a connection high speed

  I have two computers, one running XP and a Vista.

  They were bound by a simple home network wired using a switch. Internet is available via dial-up on the Vista machine.

  I changed the cable (high speed), always on the Vista machine only and leaving the intact cable network.

  Next step was to install a Linksys WRT54G2 V1 router and run the connection Strip through it.

  Then, I took the switch network cables and connected to the router. I am able to access the files on each machine to other machine.

  However, I do not have access to the Internet on the XP machine and do not know what I should do at this point.

  Could someone lead me to some documents that might guide me please?

  Thank you very much...

  You cycle the modem power cable after unplugging the XP machine, connected to the router?

  The best thing to do is power down (cable modem, router and PC), then turn on the cable modem, wait it a few minutes, then turn on the router, wait a few minutes, then turn on the PC.