Always connected view 4, after disconnected clients

Similar Questions

• VMWare View Tunnel error disconnected Client 4.6

  Hi all

  This whole process of view 4.6 always new.

  I get the following error when I try to connect to View Client 4.6 to automated pool of 3 XP desktops. In sight, administrator, I was able to create a pool of 3 computers of Office XP without problem. I called about 5 users to use the pool. I see the pool I created when I use the customer to view. Desktop shows as 'available' in the client.

  When I go to connect through PCOIP or RDP, I get the same error.

  I added a DNS entry for my server view I've seen a few suggestions in other posts, to ensure what has been done (it was not, is now...) but it still does not work.

  Error:

  Tunnel of disconnected

  The secure connection to the server view has suddenly disconnected.

  Reason: create new socket to connect to xx.xx.xxx.xx:443 (PCName.mydomain.com).

  I don't know that I missed something stupid. Anyone can add anything before I have the whole thing scarp and redo? No chance to find this documented error.

  This could be a firewall issue and if so do I need to disable the firewall on the image of the mother and recreate the pool?

  Once again forgive me yet because I'm just a newb... If I did not explain this well enough, hit me with additional questions and I will provide info that I have left out.

  Hello

  If you have a proxy server is configured in the clients Internet Explorer, please disable this and try.

  You are also able to launch Desktop 'use the connection to tunnel secure desktop' is disabled in administrator mode?

  -noble

• ODBC connection remains open after disconnection

  Hello

  in my application I use ODBC 2 connects to 2 different ODBC drivers.

  My problem:

  When I close a connection (with DBDisconnect), the connection to the database remains open until I close the other.

  Is that a known behavior?

  Is it possible to force the closure or to make it independent of the other connection?

  Concerning

  Fred

  As ODBC connections are not intrinsically included in the environment of the CVI, I watched the DBDisconnect function and it is said that the DBDisconnect function disconnects the last ODBC database connected. This is the expected behavior.

• VPN internet connection hangs after disconnection with tunnel of private clients

  I have to use a customer Cisco VPN (private tunnel) and due to the company safety Windows Remote Desktop.  This stop my normal internet access and the limit to a public internet connection "unidentified".  After that I closed the Office remotely Win and disconnect the Cisco client, my PC back to my normal internet connection, but it remains unavailable until I have unplug my normal connection and reconnect.  Is there a setting to Win 7-32 that will force the Cisco to get totally tunnel or a framework that will automatically fully my connection internet normal House?

  Hello

  The question you have posted will be well suited in the TechNet community. Click on the link below.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Connected my Bose bluetooth speakers but no sound after disconnecting.

  Recently, I connected my Bose Soundlink Mini bluetooth speakers to my Mac to play a sound for my Audition track. Once the connection I had to fix my settings of audio for hearing (forgot what settings). But now, after disconnecting my Bose speakers and using my Mac to depend on sound speakers, no sound plays the hearing. The play button is lit green, but there is no noise or anything not moving time, nothing. In addition, it is said "Playing (Resampling depending on the device sampling rate: 44100 Hz). And whenever I run Adobe hearing, a box appears after hearing of the charges and demand "audio hardware from your system parameters have changed. You want to review the preferences of audio of the hearing? "I click 'Yes' and help out but nothing has changed, and no sound is played. What should I do?

  In hearing preferences, ensure that it is always connected to your audio device, as it seems that it is not. The fact that nothing is moving is significant; This only happens when you have a disconnect.

• Satellite C660 - WIFI connection lost after disconnecting the AC adapter / CC

  I have a Toshiba Satellite C660/C660D.

  I always connect to the Internet via the wireless connection. However, the laptop must be connected to the power supply. As soon as I unplug the connection drops.

  Any help / advice would be much appeciated.

  Hey Buddy,

  Please read this article. Normally it should help you:
  [Wireless LAN connection disconnects when the AC adapter is removed. | http://APS2.Toshiba-tro.de/KB0/TSB12033H0001R01.htm]

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• How to keep passwords to be deleted after disconnection of the Firefox Sync?

  Recently reinstalled Windows and Sync used to migrate all data. After disconnecting the synchronization, all saved passwords have been removed. Is it possible to keep them without being connected to Sync?

  Which is kinda weird.

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• How much time does it take for my ipod to connect the itune after putting in disc mode?

  How much time does it take for my ipod to connect the itune after putting in disc mode?

  my ipod displays 'do not disconnect' for half an hour already, but my itune cannot always detect my ipod (as itune will pop up once I have connected my ipod normally).

  What is your real question?  Why you connect the iPod to your computer to disc Mode?

  In addition, it would be useful to know if you are using a Mac or a Windows PC?  If Windows, what version?

  If iTunes does not open automatically (when you connect the iPod), what happens when you run it manually?

• D7000 will not connect to internet after reinstalling

  Hello

  We moved our D7000 modem router from one room to the other and now it does not connect to internet at all. I spoke with our ISP and everything is fine on their end. I connected the modem and reset our ISP connection & the password, and the ISP did the same thing, without effect. The phone line has been tested, it's ok. I swapped the cables to make sure that they are not defective. I moved the modem to return to the old location, but now it does not work there either.

  WiFi seems to be ok and all our devices (phones, tablets, computer) recognize the wireless network and modem, but there is simply no internet connection. It is bizzarre! Nothing has changed, there is no new hardware, no updates or upgrades, the ISP is always the same, the only thing that differs is the location, in the same House.

  The lights on the router modem are as follows:

  Food - white

  Internet - amber

  DSL - off

  WiFi - white

  Any ideas what I could try to make it work again? Should I do a factory reset on it? This could be the cause? Move a modem do not stop working. We only had since November so it isn't old yet, and it has been working fine so far.

  Any help at all would be greatly appreciated!

  Päivi

  Hello

  It has been a while now, but I thought I would update this for anyone interested or affected by the same problem we did.

  After weeks of back and forth with the ISP and try and test anything and everything we could think, including the replacement of the D7000 in store warranty (not just once but), and nothing is helping, the ISP finally filed a foul for us and sent a CET. And what do we know? There was a flaw in the riding of Telstra which he had found, and which caused our internet connection fails. After that which has been set, we are online again. The line still falls here and there and the phone line is cute, but at least we are connected.

  And now I'm fighting with the ISP for refund during all these weeks we were disconnected while they refused to be a mistake for us and have someone out. Time for a new ISP, I think!

  Hope this helps someone else with the same problem there.

  Thank you

  Päivi

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to reset the State of package variables in all sessions connected (without requiring a disconnection and a connect) if they are reset in one of connected sessions.

  
  Hi people,
  Need help, the example requires that the value of packet data 'g_var' must be updated in the session/s connected everywhere without the session/s to be disconnected and reconnected.
  Here's the scenario:

  I created a table my_table having the pair name / value.
  A variable with global package "g_var' in his body and a get accessor method to access g_var variable from the outside world.
  This variable g_var is initialized within the block of the entry into force of the package and retrieves the current value of the variable from my_table.
  When I update the value in the table a trigger on my_table would reset the State of the package and therefore g_var to the most recent value in the same session
  All is well so far since the change in value is reflected in the current session, but if I've already connected session/s
  and I'm trying to retrieve the value of "g_var", it is not updated in already connected sessions and remains the same before the update.
  Can U help please how can I update this value in a session/s connected without having to disconnect and reconnect.
  because if I disconnect and reconect the existing sessions, it seems to show the updated value.

  Thanks in advance.

  Kind regards
  Gaurav Rajput

  Here are the Scripts:

  
  drop table my_table;
  create table my_table
  (
  my_variable_name varchar2 (100),
  number of my_variable_value
  );

  create or replace package my_package as
  Function get_g_var return number;
  end my_package;
  /

  create or replace package body my_package as
  number of g_var;
  
  Function get_g_var return number is
  Start
  Return g_var;
  exception
  while others then
  lift;
  end get_g_var;
  
  procedure init (my_passed_name varchar2) is
  Start
  Select my_variable_value in the g_var from my_table where my_variable_name = my_passed_name;
  exception
  while others then
  raise_application_error (-20004, "I got an error during Init");
  end init;

  Start
  init ('$'); -This is a call to time when the package is loaded into the memory of session
  exception
  while others then
  raise_application_error (-20003, 'Error in my_package');
  end my_pACkage;

  /
  create or replace TRIGGER my_trigger
  BEFORE DELETE OR UPDATE
  ON my_table
  FOR EACH LINE
  declare
  number of my_ret;
  Start
  DBMS_SESSION.modify_package_state (DBMS_SESSION. RESET);
  exception
  while others then
  lift;
  end my_trigger;

  /

  -It is initially set to null
  insert into my_table values ('DOLLAR', 62);
  commit;

  -test value for first time to package loading (62 views)
  Select * from my_table;

  Set serveroutput on

  declare
  my_variable varchar2 (100);
  BEGIN
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  -run the same block of end to start in another session it shows 62. All is well so far
  -check if the value after the update in the same session (shows 38), also check in another before the connected session as well (shows 62 and not 38)
  Update my_table set my_variable_value = 38 where my_variable_name = "DOLLAR";
  commit;

  Select * from my_table;

  Set serveroutput on

  -It displays 38 in this session, but there in an already connected session 62 and only after you log out shows 38
  declare
  my_variable varchar2 (100);
  BEGIN
  -my_variable: = my_package.g_var;
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  Package variables are stored in the private memory (PGA). The value is not visible in the session. A package variable is therefore not approach appropriate to your problem. You can look at in the context of the Application, as Solomon has said.

  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/app_context.htm#CIHFJHCG

• Fault of DNS round robin to 2 connection view servers

  Help! We have recently improved view to 4.6 and have now 2 view connection servers (viewconnect2.wheatonma.edu and viewconnect3.wheatonma.edu) set up with DNS round robin. We have customers to enter the name "viewconnect.wheatonma.edu" and there are 2 records to change the name in DNS to what he (to the IP address of viewconnect2, the other to the IP address of viewconnect3). We found only intermittently when a View Client tries to connect they will get the following error

  "View server connection authentication failed. Initialization failed when connecting to the server ""https://viewconnect.wheatonma.edu:443' " "

  Because now we have just removed one of the mentions A name so viewconnect.wheatonma.edu just points to the IP address of viewconnect3.wheatonma.edu and everything seems to work well.

  I have the SSL from GeoTrust certificate issued for viewconnect.wheatonma.edu correctly installed on both servers, so I don't think that is the question.

  In View manager when I check the settings for each server under "Display Configuration"-> "Servers" here is what I got when I edit entry of each server.

  Viewconnect2 settings

  No Tags set

  Secure tunnel HTTP (S)

  External URL: https://viewconnect.wheatonma.edu:443

  Use Secure Tunnel desktop connection is checked

  PCoIP Secure Gateway

  PCoIP External URL: 155.47.24.11:4172

  Use Secure Gateway of PCoIP PCoIP connections to desktop is unchecked

  Viewconnect3 settings

  No Tags set

  Secure tunnel HTTP (S)

  External URL: https://viewconnect.wheatonma.edu:443

  Use Secure Tunnel desktop connection is checked

  PCoIP Secure Gateway

  PCoIP External URL: 155.47.24.12:4172

  Use Secure Gateway of PCoIP PCoIP connections to desktop is unchecked

  Am I missing something? Is DNS round robin is not supported for the connection view servers? The firewall is disabled on the connection view servers

  Thank you

  The problem is that your "External URL" settings are wrong.

  These must represent URLS that get directly on the specific login server and cannot be load-balanced or go through a round robin DNS entry.

  Set the external URL:

  Viewconnect2 https://Viewconnect2:443 or https://155.47.24.11:443

  Viewconnect3 https://Viewconnect3:443 or https://155.47.24.12:443

  This way your connection secure tunnel will go to the same server connection as was chosen by repeating alternating DNS or load balancing.

  Your users always enter https://Viewconnect:443 the view of customers.

  There is an example here http://communities.vmware.com/docs/DOC-14974

  Select this option.

• In a roaming network, Mac always connects with AE which is further away

  So, I had a roaming network for years to host a detached office which was too far from my house.  Worked very well.  Now, my family and I have moved into a temporary rented condo (two floors).  Therefore, there is a lot of wifi networks in the area in conflict with.

  After trying to extend the network (signal too low in the area), I decided to try the roaming network again.  Most of the time, it works very well.  But from time to time, my iMac (on the ground floor) connects with the Airport Extreme, which is on the floor instead of the Airport Express, which is down in the same room as the iMac.  What happens when it connects to the Airport Extreme on the floor, my Tx rate drops to less than 100 Mbps (sometimes dramatically if) and I am unable to listen to the music to my Airport Express without dropouts.

  The dressing was to turn off my wifi on the iMac, and then turn it back on.  It will then connect to the Airport Express.   The problem is that I have to do this in general once a day as my iMac will enter into the "standby" and periodically reconnect with Airport Extreme when I wake up (or if I re-enable it if off).  Ideally, he would stay with the Airport Express.

  So I hope that there is an alternative.  I thought about simply renaming the Airport Express network in the different name of Airport Extreme.  But all the itinerant instructions whereby I know that network names must be the same for all airports in the roaming network.  But perhaps this is not the case.

  Comments are appreciated!

  Unfortunately, you encounter a known issue with the use of a roaming network... and it is not specific to those provided by Apple either. The "solution" you use, although not elegant, is basically everything with that we have (at this time) to go.

  In theory, your iMac fixed, must always connect to the Wi - Fi with the signal network hard... not necessarily the closest to it. It may be possible, since you mentioned that you live in a highly congested environment Wi - Fi, your iMac is struggling to determine the right network to connect to when starting.

  Of course, a more "permanent" solution for your iMac, at least, would connect directly to the nearest base by Ethernet station.