AM Logo at startup

Similar Questions

• Satellite Pro A300 - no sound in Windows logo at startup

  * Satellite Pro A300-15 t model series No. 58256558W, Réf. PSAJ1E-00F00YAR *.

  The sound has suddenly stopped from the Windows Vista EMBLEM or LOGO when booting and before the logon screen comes.
  This problem started in the last 5 days. Before everything was OK.

  I did not do anything in the sound settings, and they are the default selections only.

  Hello

  Maybe you should check if the Windows Vista startup sound is not disabled.

  I found a cool site that shows you how to check it:
  http://www.vista4beginners.com/disable-change-sounds

  Maybe it helps

• Black screen after logo at startup

  I have a HP laptop (G72-B66US) running on 64-bit Windows 7 Home Premium. Since I bought a year ago, it had been working fine, until one day he could not boot to Windows, leaving only a cursor flashing in the upper right of a screen LCD otherwise empty.

  By pressing ESC before the end of the HP logo screen, I am able to access a Boot Menu:

  F1 system information
  F2 System Diagnostics
  F9 boot device Options
  F10 BIOS Setup
  F11 recovery system

  ENTER - continue starting

  Various tests (HARD drive, memory, etc.) provided in the diagnostic system (F2) all completed successfully.

  Also, I have started from a repair disc and ran Windows tool Startup Repair Tool, that is no problem.

  I even restored a system image I created just after the purchase of the laptop, but the problem persists.

  A hard reset after the removal of the battery did not help.

  There are two things that I was not able to do, however:

  1. I connected to an external monitor to the laptop, but the screen does not switch to the external display, even after I pressed F4 repeatedly. Same result with fn + F4.

  2. press F8 at any stage of the commissioning is a not get into Mode Windows safe. Same result with fn + F8.

  I wonder if the two functions are disabled somehow by the HP Boot Menu, otherwise why they don't appear as options in the menu?

  In any case, any suggestions on how to proceed from here?

  Hello

  Boot from the rescue/repair CD you have, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• does not start after windows xp logo at startup

  After a power failure, the computer never exceeded the windows xp on Startup logo.

  Dell 8400 dimension has avg free and pc tools spyware doctor pack.google.com I don't know service pack.  No cd of xp in addition to the one supplied with the computer.

  I tried to use f5, f2, f8 or f12 in my quest to resolve the problem by using the software.  I have reinserted the cd of windows and tried r and enter for a new facility and it times out to examine 76294 MB disk 0 at id bus 0 0 on iastor...

  I tried to start in safe mode, the first screen of scrolling words then nothing.  safe mode with command prompt the same thing.

  I reinstalled the memory and still nothing.

  I tried knoppix, but the computer would not boot from the cd - r I've burned just the software on so that I could write zeros to the hard drive.

  I just want to clear everything and start over, but I don't know how.

  Help!

  I put in my windows 98 cd from dell, which built repair tools.  I'd wipe the hard drive for me and then I went through the steps to reinstall xp and it took finally.  I had to make a quick partition of the hard drive with xp cd because along a guarded suspended at 4%.

  my computer is back running with windows xp through my windows 98 from dell factory drive.

  I hope this helps.  I reinstalled on 18 January, I get all the time to tell you my dose.

• HP G62 Notebook PC no HP logo at startup 30 sec to post. Is this normal?

  HP G62 Notebook PC no logo HP takes 30 sec to the position of the system. After that, it seems fine. Is this normal? What can I do

  Meanwhile he's announcement. You can probably enable POST messages in the BIOS see what is happening during this time. Startup on a Windows 7 computer could be considered normal up to 2 minutes, Windows 8 is going to be substantially faster than that, especially on a Solid State Drive.

• System hangs at Dell logo at startup

  my vista system is slow or frozen at dell logo

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Toshiba 47L7453DB - TOSHIBA logo at startup

  Hi, I own a Toshiba 47L7453DB, when I turn on the TV sometimes the screen just a logo in red and sometimes not TOSHIBA.
  What could this be? If anyone can help please.

  Thank you.

  It is normal, that it only shows the logo when you have updated or reset the TV

• Remove the Toshiba logo at startup upward

  Is there a way to remove the logo toshiba to appear while the BIOS is running?

  It is a strange thing I like to do and I found no way to do it, even if I shopped on google.

  Hi Chris,

  Pressing ESC when appears the logo Toshiba usually returns to the normal mode of BIOS.

  HTH

• Satellite M45 - Missing/Bad OSB logo at startup

  When I turn on my Satellite M45, everything he says is missing/Bad OSB logo.
  I press ESC and still it does nothing.

  What should be my next step?

  Hello

  I found this thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18060
  CA? s very similar to your question.

  It seems that your CMOS chip where the BIOS is stored has developed a fault.
  In order to solve this problem, the BIOS must be re-flashed

  But BIOS reflash can only happen if you can not access the OS. If you are in an uncomfortable situation and only a Toshiba ASP could help you.

  Contact the guy and ask for help!

• BSOD after Logo Windows at startup: bad driver, AutoFailover

  I get BSOD after Windows Logo at startup. Said Startup Repair: bad driver, AutoFailover.

  Two weeks ago, that I was getting the same BSOD after logo, but only with the bad driver. I not did something to fix it (or Startup Repair), it's just dissapeard after a few days. Also, the last day that I was getting BSOD, the night when I started my pc, it remained 2 minutes at Intel Boot Agent initialization and also 30 seconds to the black screen that follows (before the windows logo). When this situation occurs I get more BSOD. I tried to restart my pc but I stayed another 2 minutes to the Intel Boot Agent initialization. This problem has been fixed in the next morning, when I started my PC, even once, I don't know how, I did nothing. I remember that it is sometimes used to stay 2 minutes Intel Boot Agent, even when I was on Windows Vista, and it also sets automatically.
  I upgraded my BIOS a few weeks before getting the BSOD, but I don't think that's the problem. In addition, there was no new driver installed before getting the BSOD, drivers have been installed after the first BSOD (even if the event viewer and the reliability monitor do not mention the first BSOD, only those who have followed the installation of the driver I know there's a BSOD before, I'm sure.)
  My system: HP Compaq 8510w (Original with windows vista bussines, did a clean install of 7 ultimate)
  BIOS version: F.20

  C: drive has only 10% free space - 15% free space is optimal for Windows

  Please visit the site Web of the manufacturer of the PC and download/install all drivers.  These are devices that lack the drivers:
  *******
  Controller of communication Simple PCI PCI VEN_8086 & DEV_2A04 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 18 that the drivers for this device are not installed.

  Serial port PCI PCI VEN_8086 & DEV_2A07 & SUBSYS_30C5103C & REV_0C\3 & 21436425 & 0 & 1 b, that the drivers for this device are not installed.
  No available ACPI\HPQ0006\2 & DABA3FF & 2, the drivers for this device are not installed.

  Base system device PCI VEN_1180 & DEV_0843 & SUBSYS_30C5103C & REV_10\4 & 118B1C9 & 0 & 34F0 the drivers for this device are not installed.

  Fingerprint Sensor USB\VID_08FF & PID_2580\5 & 1E4845E3 & 0 & 2, that the drivers for this device are not installed.

  RICOH PCMCIA\RICOH-BAY8CONTROLLER-F1B2\1 Bay8Controller the drivers for this device are not installed.
  ******
  Please uninstall ATI Tool - it does not work in Win7 and may be responsible for your BSOD (and its drivers are from 2006).  More info here: http://www.carrona.org/drivers/driver.php?id=ATITool.sys

  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BSOD BUGCHECK SUMMARY
  The debugging session: 05:54:32.426 Fri 31 August 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\083112-17019-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:08.455
  Bugcheck A, {7bcc, 2, 0, 82afb482}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! DeleteNodeFromTree + 46)
  Error checking code 0000000-a
  Arguments 00007bcc ', memory IRQL bitfie 82afb482 00000000' 00000002',' address
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  BUGCHECK_STR: 0XA
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xA_nt! DeleteNodeFromTree + 46
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:17:05.296 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-17004-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:11.356
  CD error checking, {8931d 000, 0, 82a271f2, 0}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  WARNING: Unable to verify timestamp for ATITool.sys
  ERROR: Module load completed but symbols can be loaded for ATITool.sys
  Probably caused by: ATITool.sys (ATITool + 2017)
  000000cD Bugcheck code
  Arguments 8931d 000', memory 00000000' 82a271f2 value ', if not 00000000', int Mm
  DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
  BUGCHECK_STR: 0XCD
  Nom_processus: System
  FAILURE_BUCKET_ID: 0xCD_VRF_ATITool + 2017
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  The debugging session: 04:00:26.646 Thu August 23, 2012 (UTC - 04:00)
  Loading dump file [C:\Users\John\_jcgriff2_\dbug\__Kernel__\082312-21933-01.dmp]
  By: 7601.17803.x86fre.win7sp1_gdr.120330 - 1504
  System Uptime: 0 days 0:00:07.675
  Bugcheck 1000007E, {c0000005, 82c2e4a4, 80786888, 80786460}
  ERROR: Module load completed but symbols can be loaded for mssmbios.sys
  Probably caused by: ntkrpamp.exe (nt! ObpLookupDirectoryEntry + 2 b)
  Bugcheck 1000007E code
  Arguments c0000005", ex-82c2e4a4 ', the 80786888 ad', except 80786460', Contex
  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
  Nom_processus: System
  BUGCHECK_STR: 0X7E
  FAILURE_BUCKET_ID: 0x7E_nt! ObpLookupDirectoryEntry + 2 b
  MaxSpeed: 2200
  CurrentSpeed: 2194
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

• New HP Pavilion will not go beyond the screen with the "HP" Logo and the "circle of points."

  I recently bought a computer HP Pavilion (HP Pavilion 10:10 - e010nr). It was my first experience with Windows 9.1, but everything seemed to go OK. Then, yesterday when I had to retype my password, the computer began to run very slowly and then seemed to lock-up; It would not do anthing. I held onto the "button until the computer turns off and then restarted. When it restarted, it didn't go beyond the initial screen that shows "HP" in a blue circle and the small circle of the small white watch points there work but nothing ever happens. (I tried this many times, but the same thing happens. If anyone can help me to go beyond this opening "HP" screen, I would really appreciate it.

  Hi Referee06. I understand that your computer does not load past the HP logo at startup. To resolve this problem, proceed to the section "the computer crashes to the screen of the HP or Compaq logo or the Windows loading screen" in this document: computer does not (Windows 8)
  
  Let me know how it turns out.

• Split 13 x 2: split 13 x 2 hangs at startup

  My Split X 2 sometimes locks the blue HP logo during startup.  Generally a hard reboot will work with any other issue.  A few times, including today, hard reboot does not work and it continues to block on the logo screen.  I restarted hard about ten times today before he finally fully initialized.  Any ideas?

  Use Diagnostics to check the hardware. To start HP PC Hardware Diagnostics UEFI:

  1. turn on or restart the computer, quickly, press ESC, and then press the f2 key

  2.http://support.hp.com/us-en/document/c03515402

• Start of start for the HP logo

  I bought a HP dv8000 used and at startup, it shows the projection of COMPAQ logo on the screen, not the HP logo as it should.  I guess that someone put a Compaq motherboard or whatever in it.  My question is, what can I do to clear the Compaq logo and back HP logo at startup?  On the MB logo "storage"?

  Also, if it's a Compaq MB, can I use the HP Bios updates?  Or should I stay with using only the Bios Compaq upgrades?

  Thanks - Bill

  Compaq and Hp are now one company. HP sells Hp models and Compaq. Compaq marketed to business appearance with HP models for entertainment. the post merger appeared dv8000 do you infact have a HP unit. but it's the things compaq. The start screen is coded in the bios and there I have no way to change that. It does not affect the performance and you can do all the updates on our website, no problem

• Apple Watch turns is not on... Not at all.

  Today, I took my watch off costs and tapped to turn on, it didn't turn. I contacted Apple's Support, and I have to go to a store Apple Tuesday. What happens is, whenever I go to force the reboot of my watch, the Apple Logo appears for about 4 seconds, then it disappears and comes back to a black screen. Please help, thanks

  -Connor

  Hi Connor

  Given the steps that you have already tried, there is nothing else you can do.

  Attend the appointment at the Genius Bar Tuesday, because Apple will need maintain your watch.

  More information:

  "If you see the Apple logo at startup and your Apple Watch seems to restart or start never completely, contact Apple support"

  If your Apple Watch does not respond or won't turn on - Apple Support

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]