An Officejet 8500, an Officejet 8600 on two separate wireless networks and a laptop

Similar Questions

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• How to connect the Officejet Pro 8100 printer to wireless network

  Bought a "nine" Officejet Pro 8100 and want to use via my wireless network. The CD supplied with the printer is obsolete. Updated Apple software but can't see how to connect the printer to the network. Getting Started Guide is no help on this issue. Searched for support without result pages. Utility HP does not provide a method to set up a wireless feature. Find all the instructions, I say first of all make sure that the printer is connected to the wireless network, and that's what I can't find out how. What I forget?

  Finally, I called HP hotline for help and was rescued. It turns out that Apple's software update software includes all the required components. The software from the HP Web site is no longer available. It's frustrating to see the Getting Started Guide refer frequently to the HP installation wizard and be unable to locate it. Once the wizard tech took control of my computer and installed the necessary software, it was a breeze!

  I also note that compose the support number to talk with a guy was rather brief: between 1 and 2 minutes, I recall. Although there was a menu of the phone, it was not a large (unlike the attempt labyrinthine and often circular to locate the online help).

  Insofar as HP knows the necessary software in not available via software update or directly from HP, wouldn't make sense to inform buyers, as well as how to access? At least do not place meaningless, useless on the Web site links that lead into oblivion and frustration!

  Although I did appreciate the journey, I finally arrive at my destination. Thanks to Aris, HP technician. You are exceptional!

• HP Officejet Pro 8600 N911g cannot print wireless AirPrint or desktop/laptop

  Hello

  My systems are all running Mac OS X 10.8.2 (Mountain Lion). I have a Linksys E4200 configured for 5 GHz Wireless-A and 2.4 GHz Wireless-G. For testing purposes, I have firewall of the router disabled.

  Here's what I CAN do:

  -connect to the Web server for the printer (printer is correctly connected to the wireless network)

  -print using ePrint (printer running mechanically)

  What I can not do:

  -Install the printer in OS X

  -printing of my office/computer systems portable

  -printing of my devices via AirPrint

  I tried the following:

  -reset the network settings on the printer

  -restart the router

  -restart all systems

  Error messages:

  -System preferences print & Scan shows the printer as "near printers: Officejet Pro 8600 [CBE189].

  -in installation "settings until 'Officejet Pro 8600 [CBE189]" configuration of the device... ". "returns with"Unable to communicate with the printer at the moment"and I have to cancel installation

  -When printing using iOS devices, I can choose the printer, but any print job expires.

  Any help would be greatly appreciated!

  Thank you!

  Too bad! Solution found - unplug the power cord, wait 30 seconds, plug it in again. Pop, it works. (So old-school)

• at & t u-verse, & having problems connecting my Officejet 4500 to my current wireless network

  Hello

  I just got an Officejet 4500, and I am unable to connect it to my current wireless network.  I'm AT & T U-Verse so I use 2Wire equipment.  I have a Mac Book Pro, and I'm on Mac OS X operating system 10.5.8.  When I try to connect, I get an error message saying something like "Failed to connect."

  In the past, I had problems connecting my Airport Express to 2Wire.  In order to make it work, I connected the router 2Wire and changed the WPA - PSK (TKIP) security settings and WPA2 - PSK (AES) to just WPA2 - PSK (AES).  My Airport Express was able to connect without any problems.

  Please help me to connect my Officejet 4500 to my 2Wire router.  I note also that I'm not really tech savvy so I need instructions are written in simple terms.

  Thank you in advance for your help!

  Marc-Antoine

  Tanisha Hey! Try as part of this support document: AT & T 2Wire routers: "Login failed" or "Can't find printer" Message, or cannot connect to a wireless network

  I hope this will get back you on track!

  -Sean

• Office jet pro 8600 more: Office jet pro 8600 not available in wired networks and wireless

  Have a 8600 JO Plus (CM750A) (N911G), he worked on the wired connection with a static IP address. Then one day she stopped communicating on the cable network. Don't reset to the default values, but still no connection, no activity lights on the connection on the printer's ethernet port. Configure to use the wireless connection. He worked for a while, and then he stopped too much work, could not see it on the wireless network. Reset to the factory settings, yet could not set the wireless connection. She see the SSID of the wireless and allow to enter the password, but would not connect to the wireless network. Now cable and wireless connectivity will not work. I think that the network adapter is broken. What is the OPINION of the Committee of the network so I can order a new one? Connected to USB at the moment and may have a printing station. So OK for now but need a new Board of Directors network. Or any other suggestions on how to connect to wired or wireless. I set factory defaults may times and set a static wired network IP address (which does not stick).

  Hey @John-G1,.

  Welcome to the Forums of HP Support!

  I understand that you are looking for a replacement of the network card for your Officejet 8600 Plus e-All-In-One Printer. It is not a replaceable part. However, if you contact HP support by clicking on this link you can discuss options based on your printer warranty.

  If you appreciate my help, please click on the thumbs up icon. If phone support is able to provide you with any resolution, click on accept solution. The two icons are located below this post.

• 'Unable to Find' OJ Pro 8600 Premium on the wireless network

  Network: Router NetGear 3400, WEP 64-bit + computer Dell laptop + Officejet Pro 8600 Premium N911n, HPC782FE.  Vista 32 - bit OS.  New printer installation, wireless connection to the wireless internet router.  Test results of the wireless network said successful wireless wireless wireless printer installation works, connected, SSID found, the printer settings compatible with the configuration of the wireless router.  Network status says HP Network Configuration page is ready, Active connection Type is wireless, 802.11 Wireless status is connected.

  I can send HPeprint to the computer through the router, and it comes back through the router to the printer when it prints.  But I can't print directly from the computer to the printer, even if the two seem to be connected to the network via the same router.  I'm puzzled.

  When I press the icon on the screen of the printer wireless, it says connected, IP: 192.168.1.105 (I put manually after having read several problem Q & as), with the correct network name and MAC, with a strong signal.  When I click on "I can see that the status is logged on and the intensity of the signal" and then enter the IP 192.168.1.105 and then click Next, the search for a printer "Can't find printer" product and I'm back where I started.  When I jump to the next page and finally get to the HP Print and Scan of doctor, he is unable to identify or fix the problem.

  Hi Allen73,

  There seems to be some problems with the configuration of the network configuration. Please call our technical support to the 800-474-6836 if you're ok with it, they can log on to your computer and take a look to see what settings need to be corrected. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Try to install OfficeJet Pro L7680 via a wireless network on OSX 10.8.2

  It does not work!

  I watched the videos and documents, and the printer appears in the menu of add printer, no matter how long wait.

  I CAN manually add it via the IP address, but it only tri-des works; I can only print B & W and no other feature (fax, scan). I can update the drivers, but the drivers updated... weird, because if I then remove the printer and try and add it again, he will see it as ONLY a fax.

  Router is D - LINK DIR-655, if it's important.

  Summary: can add printer via IP, but it his lack of features, cannot add printer via the normal method.

  Add a printer by IP Yes, never give all the features, usually only basic printing.

  Make sure that your router has the latest firmware and it is freshly restarted by pulling the power plug.

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• All-in-one Officejet 4620 HP loses connection wireless network when it starts in mode 'sleep'

  My printer HP 4620 all-in-one wireless works fine until it enters mode "Eve".  Once it goes into sleep mode, it is not wake up if a print job is sent to it.  If I wake up it manually by pressing the power button flashing, she does still not print.  If I've completely put off and then on again, the print job that has been put on hold on my computer will start printing, but it's a huge pain and loss of time almost everytime I want to print.  I installed all available updates.  I also assigned a static IP address in an effort to correct this, but nothing helped.  I see that others have complained about this problem, but I see not that anyone has had success resolving this.  My operating system is Windows Vista.  I use a Sys-Link Wireless G Router.  Thank you.

  Ok.  My printer worked flawlessly for a few days, and I think I can declare the problem solved.  I think the problem started when I applied a HP recommended workaround for a different problem, that is, HPNetworkCommunicator.exe kept running and goes out 10-15 seconds, with the cursor displays activities whenever the program is running.  When I reversed this workaround solution, solve the problem wireless (but of course, I had once more the annoying problem with HPNetworkCommunicator.exe).  I then discovered that HP had published a software release that fixes the problem with HPNetworkCommunicator.exe.  I installed the new version of the software.  HPNetworkCommunicator.exe is now fixed, and my wireless connection remains stable even when the printer goes to sleep.

• Can you do a two router wireless network?

  I want to do a network with two routers, that the two coinnect to an ethernet switch. Is this possible?

  You would have to connect the second port of the lan router to the first router lan port and use the first option in this guide.

• New HP Officejet 8600 don't scan?

  I just installed my #8600 pro to my wireless network and the printer works fine from the computer, but when I try to scan to my computer I get a message in the window of the printer (for scan to the computer, make sure that the feature is enabled)!  When I ran the disc from the printer, jumped the fax configuration, I don't remember seeing a separate procedure to set up the scan function.  Did I miss something on the installer?  Can I rerun the software disc?

  Hi DEERJOHN1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have a problem with being able to scan to the computer. Please run the HP Print and Scan doctor.
  If this does not resolve the problem, please do not hesitate to write again for additional troubleshooting instructions.

  Thank you for your time.

• HP Officejet 8600 more print and scan problems

  Hello

  I had my HP officejet 8600 more for 2-3 years and always had problems following and just kept reinstalling the drivers as a quick fix. I am now starting a business from home and I have no time to deal with printing and scanning the questions and, of course, my warranty has expired! My operating system is OS X version 10.9.4.

  When I scan to my computer, the printer indicates "not found computer." The status of my mac is no different than when I scanned a document a few days ago! Remove and reinstall the drivers solves this problem temporarily but I want it fixed permanently.

  In addition, when printing, sometimes a page can print immediately and at other times, it may take 5-10 minutes to print even if its status is 100% full in the print queue - even once, reinstall the drivers is a quick fix but I want a permanent solution.

  Any help to solve these problems would be greatly appreciated.

  Thank you very much...

  Hello Hello!

  I thank very you much for getting back to me! Glad to hear things are working at the moment! Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Have a good!

• OfficeJet 8600

  A 8600 connect simultaneously wired and Wi - fi? Mine says cannot connect to Wi - Fi when connected by cable.

  Thank you

  Hi T_Friedrich, sorry to hear that you are having problems with your Officejet 8600 of connection to the network.  To answer your question, you can have active wifi and also to use a USB connection. The printer has only an IP address if you are limited to one type of network connection. You can you WiFi, but you can't use either net at the same time.   Here is a document that will better help you with this problem.   http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=86228&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4323648

  Hope this helps with your problem.

  Thank you

• HP officejet 8600 printer do not print

  I'm fed up with my printer Wi - Fi security etc. which requires constantly re - start. I would like to connect using a USB cable. Is this possible? My computer is connected to the wireless network, and this cannot be changed.

  I have a 8600 Pro HP, model N911a.

  The Test of the wireless network still works and it prints almost never these days. Recently updated the driver automatically. No improvement.

  Thank you!

  Hello again treesonion,

  Just wanted to follow and see if you still have questions or not.

  Just a heads up, if troubleshooting I provided has solved your problem or helped somehow, please click on the option of SOLUTION ACCEPTABLE from the bottom of MY post so that others can help as well.

  If you have any other questions, please let me know.

  Thanks again for your time.

  See you soon,.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.