All-in-one Officejet 4620 HP loses connection wireless network when it starts in mode 'sleep'

Similar Questions

• printer all-in-one Officejet 4620

  Looks like the 4620 printer has the same problem of restart with most everone. -That someone has a fix for this problem

  Hello dennis1938

  I understand you are having problems restarting your HP Officejet 4620. I want to offer my help in this case. The first thing I want you to do, would be for you to follow the steps in the HP Support document: The HP printer will not start up, or answer. Once you have the printer started, I would make sure that you have updated the firmware of the printer. You did not post what operating system you are running on your computer, but you can get the update of the firmware via the page HP Officejet 4620 e-all-in-one of the printer drivers . It is enough to select your operating system from the drop-down list box and click on 'Next' once that refreshing the page just scroll down and click "Firmware". Click Download and follow the instructions to ensure that you are running the latest version of the software for the printer.

  This should solve your problem with your printer. Thanks for posting this topic on the Forums of HP. Have a great day!

• All-in-one Deskjet 2540 fails to connect wireless

  This printer worked fine without thread until I installed a new (AT & T U-Verse) Internet connection.  Previously, I had a combination router/DSL that had wireless 2 sources (hi and lo Band).  The printer connected to a wireless network with the SSID of "Rooter" (stupid name, but what the heck).

  When the modem/router has been replaced by the unit of AT & T, I lost a wireless sender (Rooter) so I tried to change the printer another point of wireless access on my local network named "FBI_Van" (another stupid name).  To do this, I used my cell phone which, at the time, was very well connected to FBI_Van.  I loaded the drivers from the printer to the laptop, connected the USB cable and began to install the printer for the new wireless connection.

  Efforts to do this have failed.  In the window "Select one of the available wireless networks" (after using the link "Convert a USB port connected wireless"), I could see my access point 'FBI_Van' very well.  By clicking on the button "use this connection", asked me to enter password WPA_PSK expression, I did.  It's the same EXACT sentence I used to connect wireless laptop.  The green progress bar went to halfway and then I got the error:

  "Cannot locate the SSID that you entered, try again".  I won't be an SSID, I entered a password that the requested software.

  First of all, I was not one who entered the SSID - this is the software that "judge" and I just clicked it.  Second, the password was perfect without error letter.

  Whne I run the wireless network Test results, using the printer itself (button wireless & B & W Print) he told me that the printer has been tirelessly "Rooter" looking for (and not finding).  The blue wireless LED blinking and the "signal strength" LCD is forced.

  So, after this long explanation of events, what can I do to make this printer to accept a new SSID access?

  Is there a way to reset the printer to "factory delivered" settings so I can start over?

  Bill

  To answer my own question.  Is there a way to reset the part of the printer wireless.  It is NOT mentioned in the manual, but here's how do:

  When the printer is on, stop the LED flashing wireless by turning off the wireless.

  Hold the button cancel (the big red 'X') and the wireless button at the same time.

  Wait about 10 seconds until the power light flashes once.

  Go to the computer that you have installed the printer software on and go down the menu to "Printer Setup and software" and click on that

  Press the radio for wireless configuration MANUAL (do not push the button 'connect to the router')

  Follow the screens to select the wireless network you want, click Next

  The password for the connection of input and let the software connect the printer to the network.

  It MUST work, if not, repeat the operation (I got two times)

  Bill

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• Cannot sweep the all-in-one Officejet 4630

  Hi all - help needed please.

  Recently bought a printer all-in-one Officejet 4630 and had nothing but trouble, set-up and use it. After several attempts to put in place, everything is roughly in order, though I can't yet scan of the control on the machine Panel (I can scan only through "system preferences" under the apple icon).  Whenever I try to scan the engine control panel (and not through system preferences), using either the wireless network (Airscan or whatever it's called) or the USB cable, I have the following message on my laptop screen:

  Task is not available

  The task of "Photo (JPEG)" found on your device is not available on your system. Please select another task.

  The same thing happens if I try to scan to PDF. I use an old (c.2007 MacBook Pro) that runs the OSX10.9.5 Mavericks. Internet connectivity is not a problem because we have the right cable broadband. All I want to do is scan directly from the printer to my computer, preferably using a wireless connection. Help, please.

  Thank you

  Hi @nckbtlr and Happy Halloween!

  I'm sorry to hear about the problems you are having with your Officejet 4630. I understand that you are unable to scan from the front of the printer. I'd be happy to help you with this.

  In the spirit of Halloween, first I have to ask: what did the Mummy to tell the Agent from HP Support?    Let's wrap this case up!

  I suggest to uninstall and reinstall the software. Please follow the instructions below to complete a more comprehensive uninstall than basic uninstall. I know that these steps look long and convoluted, but I made it easy to follow and have confidence that these steps will solve the problem.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• All-in-one Officejet Pro 6830: INSTALLATION of the OFFICEJET PRINTER

  I had already set up my printer when I had last year. A few weeks ago, my printer was unplugged, when I connected again, wanting to be set up again. He won't go beyond the screen 'Configuration of the cartridges' because he wants than that it came with that I don't have. Why is there need to put in place again and what can I do about it?

  Hey @britb,

  Welcome to the Forums of HP Support!

  I understand that printer e-all-in-one Officejet 6830 asking cartridges SETUP. For this problem, contact HP support. You can do this by clicking on this link and fill in the form below.

  Please let me know if you are able to resolve your problem after contacting HP Support. If you are, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• my hp Pavilion all in one 23-g218 can be connected to a TV

  my hp Pavilion all in one 23-g218 can be connected to a TV

  Not with the hardware you have but you do not have 2 x usb 3.0 ports and there is such a thing as a usb 3.0 HDMI adapter:

  http://www.Amazon.com/Ideashop%C2%AE-quality-adapter-converter-laptop/DP/B010S09TPI/ref=sr_1_3?ie=UTF8 & qid = 1448745297 & SR = 8-3 & Keywords = USB + 3 + to + HDMI

  It will not sound, but you can connect an audio cable, too. Also don't forget something like a Chromecast that will take what's on the computer screen to the TV via a wireless connection with any kind of video card. I think Amazon is something similar.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• All-in-one Officejet 5610: lost all ability to scan after operating system upgrade

  Hello

  First post.

  Tried to implement everything. Need for new perspective or someone just told me that the printer/scanner is not taken in charge any longer.

  Recently updated to OS 10.8.5 as well as extra memory.

  Have scanner only for the work of the company.

  The scanner just stopped working after update of HP software. I don't remember version. Nevertheless, today I removed all HD and started around, but nothing works.

  Start over means, I downloaded a new driver and the patch.

  Using a HP scanning Application. Now that the application does not appear even on the computer.

  Let's start with some basic questions and then go from there:

  Neither HP or HP scanning Application utility are now on the hard disk after you follow the instructions from HP to delete.

  What I need the original disks and to reinstall the software from it or can those be online?

  Thank you.

  Mike

  Follow-up.

  Tried this approach (see link), but the all-in-one Officejet 5610 is not listed. I suspect the printer/scanner in is no longer supported?

  THX!

  http://www.MethodShop.com/2013/12/HP-utility-install.shtml

  Second follow-up:

  I understand how to use of Apple's Image Capture application as a workaround. Not as friendly as HP Scan.

  Unless someone can tell me the HP and HP Scan utility always work in OS 10.8.5 for the 5100, I guess that will be sufficient.

  Thank you.

  Hello

  For Mountain Lion, your printer software is provided via Apple Software Update.

  Follow the steps below under "Use Apple Image Capture" to scan with the Officejet 5610 on your operating system:

  http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04788799/

  If you are having problems scanning, be sure to follow these documents to install the latest drivers from Apple Software Update:

  http://support.HP.com/us-en/product/HP-OfficeJet-5600-all-in-one-printer-series/441142/model/441144/document/c04510394/

• Can't find model number, installation instructions for the unit duplex for printer all-in-one Officejet 6110

  MY friend gave me a duplex unit to another printer 6100 series he had. We thought that it would be compatible. The HP site says that my all-in-one OfficeJet 6110 can use a duplexer, but that's all he says: no model number and no installation instruction.  Does anyone have any info or suggestions? I can't know just by looking at my printer.  (The duplexer No. FPU is C9101A).

  Thank you!

  To install the duplexer, you must remove the rear blankpanel of your OJ 6110.  The rear panel will be approximately 9 "wide and 4" high with two s tab that can be moved together in the output panel.  Snap the duplexer in place once it is removed.  Make sure that it is oriented correctly, the label must be on the bottom.  Use large buttons on the ends of the duplex unit to release the duplexer if it is to be removed or moved.

  With the duplex unit installed, you will need to configure it so that it is recognized by the driver.  See the post here for more information on activation of the duplexer.

• all-in-one Officejet 6310: officejet 610 all-in-one in offline and don't watch does not reinstall in windows 8

  I have a Wondows 8.1 and a printer portable all-in-one officejet 6310.  I have my printer installed and works fine on my laptop, but out of the blue one day that the printer will be offline and restarting the computer and printer does not correct.  I've uninstalled and reinstalled the computer many times - this helps for about a week before it disconnects again.

  Now when I uninstall my laptop says there is no printer in range and lists no printer for me to install.  When I tried to manually in my printer - doesn't say that there is no such printer available.  Any suggestions?  Apparently this ONLY happens to me on my computer and not someone else in the home on their laptops - we have a total of 4 laptops in the House all on the same router and using the same printer.  Oh how I feel like a fool with windows 8.  Someone at - it helps or good suggestions for me? PLEASE? !!

  Don't worry, it happens to the best of us. I recently became very angry because my iPad was not charging, the end came unplugged from the wall charger! Laughing out loud

  This problem can be caused by outdated closed ware, contradictory I.P within the router, etc. I have worked on a Thread revolving around Windows 8.1 for awhile, check it out for some possible future troubleshooting operations.

  There are steps to add the printer a way, assign a static IP, check that some updates are installed by Microsoft, etc.

  Missing/partial prints & printer offline on Windows 8/8.1<>

• All-in-one Officejet J6480: printer Officejet J6480 on Windows 10

  I've owned a printer all-in-one Officejet J6480 for a few years.  I bought a new Lenovo computer several months that came with a free to Windows Update when 10 is which would be published.  I managed to load the J6480 software and everything worked very well, including the scanner.  When Windows 10 came out I upgraded to it and rebooted the printer software and everything worked fine.

  Then about two weeks ago, all the J6480 would do is printed.  When I tried to open the HP Solution Center to scan a document all I had was a 'ping' and the Center does not open.   So I tried to remove all the HP software and re - load.  It would be the load but not completely.  I kept getting the message that "the application you are trying to use has been blocked to open because it could damage your PC or the loss of data. This is because some applications that worked with a previous version of Windows may not work the same way with Windows 10 ".  I do not understand why it worked fine for a few months with 10 windows and now it's incompatible, unless there was an automatic upgrade (Windows 10 or HP) that is now causing the conflict.

  I've uninstalled and reinstalled the software several times but to no avail.  Can anyone suggest a solution?

  Hello

  Please check your history of updates of Windows 10 and remove/uninstall kb3132372

  Note: Microsoft is working with Adobe now:

  https://support.Microsoft.com/en-us/KB/3132372
      
  To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

  Kind regards.

• How to set the time and date on printer n911a e-all-in-one officejet pro 8600.

  How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide.    Thanks in advance. Jim

  Jim go to settings on the 8600, click Preferences.

  There is an option DATE and HOUR.

• The upgrade of all-in-one Officejet 6210

  I have a 6210 that I love, but it is not compatible with Windows 8 (for example when I want to scan doesn't give me the option to save as a jpg file.

  I like the printer and want to know what model number would be the direct upgrade of the 6210?

  Sorry, you are right. This printer is not compatible with Windows 8. A great upgrade to the next type of printer which will be compatible would be an all-in-one Officejet 6600 or 6700 Officejet printer.

• I can't receive an attachment from one computer to another in my wireless network

  Whenever I try to send an email with an attachment from one computer to another in my wireless network, the attachment comes through.

  I changed it in plain text... and it works!

  You are the very welcome. (It was my first suggestion).

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith