An unspecified error has occurred (766f6c756d652e63 3f1) on the computer.

Similar Questions

• Error: "CHKDSK cannot continue in read-only mode" and "an unspecified error has occurred (766f6c756d652e63 3f1).

  I'm trying to run a CHKDSK on my hard drives. Whenever I try to do "chkdsk C:" or any other volumes (internal or external) invites of high command. I had

  "This type of file system is NTFS.

  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)

  I have three internal volumes C: D; and E:. Running chkdsk on a volume any returns "CHKDSK cannot continue in read-only mode. Run with / f on C: will check the disk (no error) is restarted. Run/f on any other volume, I had "an unspecified error has occurred (766f6c756d652e63 3f1).
  Has received the same error in recovery mode, safe mode, using the account administrator or UAC disabled.
  Also got same error when you try to chkdsk on all external hard drives.
  I have formatted my E: and ran chkdsk on an empty volume, got the same error.

  Defrag works OK without any problems. External hard disks can be verified (no error and the bad sector) to another computer (win7 pro x 64).
  My external hard drives can be ejected without any problem. But ejection always fail after running "chkdsk /f.

  This computer is win7 pro x 86.
  Installed software: VMWare workstation 7, Microsoft Security Essentials, Visual c# 2010 express, Office 2003, Daemon Tools. DropBox

  Please help me to solve the puzzle.

  Thank you
  Hello

  After some debugging, I found that the ifsutil.dll reported an exception 'divided by zero.
  Finally I found that there is a fix from Microsoft for my netbook CPU (AMD C60).
  A Chkdsk command fails with an error not specified on a Windows Server 2008 R2 or Windows 7-based computer that uses a low frequency CPU AMD
  http://support.Microsoft.com/kb/2502789
  This fix solved my problem.

• An unexpected build error has occurred: index was outside the bounds of the array

  Hello

  I use OPA version 12.1.1 (November 2015 edition of cloud).

  When I try to debug my OPA project I get this error:

  "An unexpected build error has occurred: index was outside the bounds of the array.

  Does anyone of you understand what that means?

  Kind regards

  Xavier M.

  What language / region is your project?

  You are able to apply for service with the support of Oracle?  This error usually requires the investigation of the project to determine the root cause.

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/filter

  I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?

  Hi Anthony,.

  You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom

  Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.

  Provide the permissions to read and write to your identifier and then close.

  Then reopen Lightroom. You should be able to open Lightroom.

  Please let us know if it helps.

  Kind regards

  Tanuj

• "Adobe than Photoshop Lightroom 5.4 cannot be installed to this disk. An error has occurred all in assessing the JavaScript for the package. »

  Hello

  I get this error when trying to install / update LR 5.3 5.4:

  "Adobe than Photoshop Lightroom 5.2 cannot be installed to this disk. An error has occurred all in assessing the JavaScript for the package. »

  
  

  I hope that there is someone who can help me here.

  See you soon

  Re: Lightroom 5.2 installation fails - WARNING Javascript

• HA error "an error has occurred while setting up the HA Agent on the host" & "Failed to find host name" on the ESX host

  I had to reload of the two ESX 3.0.2 Server I have here.

  Now the I get a HA error "an error has occurred while setting up the HA Agent on the host" when try to reconfigure HA.

  I note also that the same host if console type 'hostname - a' I get "Failed to find host name"

  I still seem to migrate virtual machines, but clearly something is wrong somewhere, there DNS config file I can check, I already check ed the hosts file and I can ping everything using long DNS name and short host name.

  Or maybe there is dns service can I restart?

  Thank you

  If you are running ESX 3.0.x check/etc/FT_HOSTS

  You can also check http://kb.vmware.com/kb/1003691

• An internal build error has occurred.  Please check the error log.

  All of a sudden today while working on a project, I got this error message in the issues window:
  
  "An internal build error has occurred. Please check the error log. »
  
  The background in the my application has been configured for white, now even that returns to the default gray
  
  Any help would be appreciated. The file of the only error I can find at the root of FlexBuilders is called hs_err_pid3140
  
  Thank you

  After a few hours of searching, I found a forum with a lot of these questions. I'm posting the links here just in case someone else has the same problem.

  Basically, it's a bug, and nobody really knows what the exact correction is... but some of the solutions have worked. For me, I copied my project files in a backup folder. Delete the project. Created a new project and copied the files back.

  http://tech.groups.Yahoo.com/group/flexcoders/message/69312

  http://tech.groups.Yahoo.com/group/flexcoders/message/68604

  http://tech.groups.Yahoo.com/group/flexcoders/message/62112

  http://tech.groups.Yahoo.com/group/flexcoders/message/61840

  http://tech.groups.Yahoo.com/group/flexcoders/message/57573

  http://tech.groups.Yahoo.com/group/flexcoders/message/51696

  http://tech.groups.Yahoo.com/group/flexcoders/message/41079

• Installed more recent Flash Player, message "an error has occurred" on most of the Youtube videos and other media does not

  After you have installed the latest version of Flash Player, on the YouTube videos, I try to read the message "an error has occurred. Please try again later. "appears. In addition, on sites like Tumblr other media, such as audio and videos uploaded, play not at all - it's just a white space where it should be. This set works fine in Chrome.
  I have tried everything I can think of - I deleted the cache and deleted cookies, updated all plug-ins, uninstalled and reinstalled Flash and Firefox, disabled Ad-Block, he ran in Safe Mode and navigation private, restarted my laptop a couple of times - but none of this has worked.

  Try turning off protected in Flash drive mode.

  See:

  • [929081/questions/929081]
  • [/questions/928820 #answer - 340046]

• After installing Adobe CC with LR and Photoshop, PS works but opening of LR, I have two error messages.  An internal error has occurred.  Cannot create the necessary folders: myusername/Users / / Library/Application Support/Adobe/Lightroom develop presets

  Error messages when you try to open LR of CC.

  An internal error has occurred.

  Could not create the necessary folders:

  MyUserName/users / / Library/Application Support/Adobe/Lightroom/develop presets

  AND

  An error occurred when attempting to change modules

  Please see if the solution posted here helps: could not create the required folder

• First CS6, Yosemite + R3D "an unspecified error has occurred in the execution of a consistent action"

  Hello!

  I seem to have a problem with Premiere Pro CS6 and Yosemite:

  I have a project of creation in first 6.0.5 composed entirely of R3D media. When the 10.9.5, Mavericks running everything seems to work perfectly. I could play the timeline with or without rendering, and I have no error to speak of. After doing some research and found out that CS6 works very well in the Yosemite 10.10, I decided to take the plunge and upgrade last night. Today, I opened the first draft and I got the notorious "an unspecified error occurred during the execution of an action in accordance with" error message for apparently each R3D file in the project, and I couldn't play the timeline without rendering each image.

  I'm back on the installation disk and restored first to the 6.0.0 original, but which did not help. While in Yosemite, updated first return to 6.0.5 and I found myself (not surprisingly) with the same problem. I have a backup of the Mavericks 10.9.5 I can come easily, but I would like to understand what is happening! Yosemite is the only variable that has changed, but I want to know what to do to allow Premiere Pro CS6 + Yosemite + all files R3D play well together.

  Please let me know if I can provide more information or if there is anything I can do to get this up and running again.

  Thank you!

  Andrew

  Hi Chris,

  Hi there, I was wondering if anyone has found a fix for this? I spent a lot of time trying to solve this problem. It seems like the best solution at this point is to return to Final Cut, unless there is a solution? Adobe?

  OS X 10.9 is the latest version of Mac OS X, you can use with Premiere Pro CS6 depending on the requirements of our system. If you continue to use the CS6 and want a stable system, I would invite you back on OS X 10.9, lock your Mac and not updated the operating system any longer.

  Thank you
  Kevin

• I have two error codes on Windows update Code: 80240016 & an internal error has occurred in Ox80010108 during the installation of Service pack 1.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Click here to show or hide detailed information

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 how to obtain the latest Windows Vista service pack

  968849 how to obtain the latest service pack for Windows Server 2008

  Solution 2: Run the system update readiness tool

  Click here to show or hide detailed information

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the How to download the system update readiness toolsection ".» If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  Collapse this includes this image

  .

  2. in the Search box, type System, and then click System in the programs list.

  Collapse this includes this image

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  Collapse this includes this image

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can click here to download the preparation tool system update from the following Microsoft Download Center Web site. The following files are available for download from the Microsoft Download Center:

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  Collapse this includes this image

  Download the update tool for Windows Vista x 64 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 x 64 (KB947821) package now.

  Collapse this includes this image

  Download the system update for the systems Itanium (KB947821) package.

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads

  For more information about the update of the system tool, click on the numbers below to view the articles in the Microsoft Knowledge Base:

  947821 description of the update for Windows Vista and Windows Server 2008 system preparation tool

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:

  a. right-click on the icon of the third-party program.

  b. click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.

  3. as soon as you close the antivirus or the antispyware software, try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.

  4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  If your problem is still not resolved, you can try the steps of troubleshooting on your own, or you can contact Microsoft technical support.

  Resolution 4: Uninstall security applications, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  A third-party security application (for example, an antivirus application, a firewall, or antispyware software) can still be causing the installation fails, even though you tried to disable the application. The Windows Vista SP1 installation requires several restarts of the computer, and the security application may be reload after the first reboot. Applications that provide registry repair features may also cause the installation to fail.

  You can uninstall your third-party security application before you install the service pack. However, you should do this only if you are positive that you can reinstall the application as soon as the service pack installation is complete. To reinstall the third-party security application, you'll need either the original installation media for the application, or you need the original download. You may also need a product key to reinstall the third-party security application.

  If you are sure that you can reinstall the third-party application, uninstall the application from the programs and features item in Control Panel. To do this, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, click Start

  Collapse this includes this image

  .

  3. in the find what box, type programs.

  4. click on programs and features.

  5. click on the name of the security program that you want to uninstall.

  6. click on Uninstall.

  7. After you have uninstalled the program, restart the computer.

  8. try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
  Note You have uninstalled your security software, and your computer is more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you do not surf the Web, use e-mail, or use instant messaging, up to what you have done to solve the problem, and you have reinstalled your security software.

  9. After completing the installation of Windows Vista SP1, reinstall the security program that you uninstalled in the previous steps.

  * All of these resolutions were conducted, but still having trouble running SP1 & SP2. It's a problem of installation and after the installation of Service packs 1 & 2 times. I have a SYSTEM of 32-bit operating systems. KB947821 analytical TOOL has also been installed!, by following the instructions in res 2. Security / Antivirus has also been disabled in accordance with the instructions of res 3 & 4. Service packs Download but will not work!

  Get help the community?

  Hello DavidCarmichael,

  Thank you for your message.  I see that you have already run the system update readiness tool.  Feel free to skip step 1, but follow-up on the rest of the below troubleshooting steps:

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the results of each utility.  We can't wait to hear back on your part.

  See you soon

• An exception has occurred. Was not able to draw primitive: an unspecified error has occurred.

  I'm running Phantom EFX treasures so East slots and get the above.  Everything works fine but when I try to enter in the box, my computer freezes and I get the above expression.  I saw where others have the same problem.  Help.  Louise

  Hello
   
  I suggest you install Windows 8 Preview Release and check.
  http://Windows.Microsoft.com/en-us/Windows-8/release-preview
   
   

• When I try a system restore, I get the message "an unspecified error has occurred...". ' Vista HP, SP2

  I tried to disable Norton, but the same results.

  This is how to do system restore:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  My method will work for you?

• An error has occurred all in allowing the application.

  Hello

  I get an error while allowing the application. error when clicking on the item menu new bc app. I tried both, the "Hello World" and the app "Meet the team" passed the conversion a few times. This is due to the beta and just State temporarily or I did something wrong?

  Dennis

  HI Dennis,

  Is your site administrator in a language other than English? We have a known issue (which will be fixed by the next release) with permissions app's fault if the admin of the site does not use English. The solution is to switch to English, allow the application and return to your language.

  Cristinel