analyze netflow record

Similar Questions

• The GPS data with other analyzed data record

  Hello!

  I am a new user of DASYLab and not very good with coding, so please bear with me! I try to record (timestamp, latitude, longitude) already analysed GPS data with other data (accelerometer, etc.) in the same. DDF file. Right, GPS analysed is now sent through a series of three demultiplexers for each signal and only 1 of 16 channels, reducing the size of the output data. This data is then saved in a. The CAD file. Other data on average, recorded in one. DDF file, then saved another. The CAD file. We used to compare the data from the GPS and other devices by comparing timestamps.

  I would like to save all data to a file, either. DDF of. CSA (.) DDF would be preferable).

  When I try to add more channels in the. DDF save the module after the demultiplexer black box and GPS data to it, I get an error saying "the data to an entry in this module are the wrong type." I also receive this error when trying to send the data GPS to the. CSA Save module. I learned that this means that the size of the files is not the same of this thread. My question is, how can I make sure that the data have the same characteristics of time so I can save to the same file?

  If you need more information I would be happy to provide it, I apologize if I have something important to go.

  Thanks for reading,

  etdiv

  That's what I needed. Your time is the driver. In the RS232 input module, click the Options button.

  Select the measurement of output value, and then click the button on the time Base and select sync/time Base driver.

  That should allow you to write to the DDF file.

  

• Cisco Telepresence EX60 records do not in CUCM

  Hello

  Can you help me regarding this issue. Our client has registered in VCS before EX60. Customer decided to registered on CUCM, but before the client has performed a factory reset on the EX60.

  Now, EX60 is not save in CUCM. CUCM version is 9.1.

  And also I already followed the guide for the retail version of CUCM with TC6 firmware.

  Please see attached configuration please. And also attached are the newspapers. And also the error message, we enter.

  Thank you

  The following error may be seen in the papers attached EX60:

  Jun 1 12:47:00.844 ppc appl [2971]: 156,29 SipStack W: [Transaction 32]: got exception SIP_MSG_EXCPT = 8 transport layer
  Jun 1 12:47:00.847 ppc appl [2971]: 156.30 SipReg W: Transport failed to send record (sipexcept: 8 fermΘe by the remote side connection)
  Jun 1 12:47:00.849 ppc appl [2971]: the State of the server SipReg W: SipReg F Unexpected 156.30: 8

  Maybe something closes the TCP on the EX60. Is there a firewall between CUCM and EX60? Can we disable SIP on the firewall inspection and analyze the recording?

• Save triggered data of 2 modules

  I use SignalExpress (3.0) with USB cDAQ-9172, NI9203 current and voltage NI9201 module.  After the acquisition of (continuous) data, I use a trigger current 9203 signal software to analyze and record the triggered data (collected on the 8 channels on 9203).  However, I am not able to save the data of the voltage module 9201?  Looks like that the trigger for software only accepts a single module entry (I think).  As indicated in the attachment "triggering Input.jpg" I can only select 1 module as input for the relaxation of software (current module or module voltage)

  Is it possible to trigger on a single track and then save the data of these two modules?

  Thank you!

  Ryan

  Hey Ryan!

  You can actually do all this one-step DAQmx Acquire.  There is a tab in the acquisition stage where you can specify your trigger.  Then, there's a recording options tab up at the top where you can choose to save your data when starts it logging to a file TDMS that can be read in excel.

• All Progammically DTR, DSR, and RTS to CTS?

  I am trying to contact an extech with Labview power Analyzer.  Recording of data and all thier software cable work.  According to the manual.  I need to bind the RTS to CTS and DTR, DSR.

  I try to use the Visa controls.  Series of visa, Visa Read and Visa close for now.

  How can I programmically do this?

  Thank you

  First, change the RTS to claimed as you said that the RTS should be - 10V...

  Second, all you are doing is reading the port.  Do you have any manual referred to in the Protocol of serial communication?  The device sends continuous data, or you are supposed to write a command him then reread the answer?

• Identify and purge the duplicate files

  I'm running out of storage space. When I look at My Documents & Settings it seems that there is a lot of duplicates and files. Is there a process to identify duplicate files and purge them in Window XP?

  http://www.SnapFiles.com/reviews/AllDup/AllDup.html

  AllDup allows you to find the files duplicated on one or several folders or drives. You can choose to match files by size, date, attributes and content comparison byte by byte and also various settings to exclude certain file types or the search folders. AllDup then analyze selected records and produce a list of all files duplicate was found. The list is organized into groups, which makes it easy to manage results and process the files. You can manually select the files that you consider to be duplicates, or you can use the options of Intelligent selection that allows you to automatically select the files based on their date or folder. Duplicate files can be processed in different ways, you can choose to delete, move or copy them to a different folder or rename them in their current location. Other features include export search results, customized search profiles, a built-in file extract, ID3 tags support and more.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SnapFiles.com/reviews/Auslogics-duplicate-file-Finder/ausdupe.html

  Auslogics Duplicate File Finder helps you to find duplicate files that are likely to be scattered all over your hard drive. The program can compare files based on size, date, content and name. You can select several folders (with Sub-folders) or an entire drive to analyse, specify the methods used to determine the files double and then view the results list and delete files that you no longer need.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• "Scan to COmputer" change scan settings

  I have the J611 Deskjet 3050 a on a PC under Windows 7 64-bit. I need to scan a large amount of images with a certain size and dpi. I prefer to use the printer to analyze and record images without using the computer scan interface automatically. I have not found the options of scan on the control panel of the printer and I didn't any option of the computer interface to change the default settings of the computer analysis. I tried to create a shortcut and scan a picture in hopes that the options will be deferred, but it isn't.

  For example I would like to scan the image according to a page size A4 with setting to 600 dpi and color B & W. When I create a shortcut on my computer, it works perfectly. When to place the paper in the printer and click the option scan from the control panel to create the scans of the page size is the whole scanning area and the dpi is 200.

  I hope that this is possible, because it will save a lot of time. Any help on this would be greatly appreciated. Thank you for your help in advance.

  Sorry, you have a problem with the registration of your scanning settings as it looks that you have taken all appropriate measures.  Maybe this suggestion will work:

  When you open the HP Scan, make your changes, click Scan.

  Then click the sign lower to analyse in another page with the same settings, however it will record all in a single file unless you go to your advanced on HP Scan settings and select the file tab to create a separate file for each scanned page.

  In addition, when you first open HP Scan, you will see at the bottom for "Create a new shortcut" and allows you to save these settings as well.

  See page 24 of the User Guide for more information, but if my suggestions or link does not help you, how the printer is connected to the computer (USB, Ethernet or wireless)?

• Is there a program that well to remove all my duplicate personal folders?

  I don't know what happened, but now I have 10 copies of each, my itunes is all crazy

  Hello

  You can read their comments and decide which you want to use

  Auslogics Duplicate File Finder helps you to find duplicate files that are likely to be scattered all over your hard drive. The program can compare files based on size, date, content and name. You can select several folders (with Sub-folders) or an entire drive to analyse, specify the methods used to determine the files double and then view the results list and delete files that you no longer need.

  http://www.SnapFiles.com/get/ausdupe.html

  AllDup allows you to find the files duplicated on one or several folders or drives. You can choose to match files by size, date, attributes and content comparison byte by byte and also various settings to exclude certain file types or the search folders. AllDup then analyze selected records and produce a list of all files duplicate was found. The list is organized into groups, which makes it easy to manage results and process the files. You can manually select the files that you consider to be duplicates, or you can use the options of Intelligent selection that allows you to automatically select the files based on their date or folder. Duplicate files can be processed in different ways, you can choose to delete, move or copy them to a different folder or rename them in their current location. Other features include export search results, customized search profiles, a built-in file extract, ID3 tags support and more.

  http://www.SnapFiles.com/get/AllDup.html

  Fast Duplicate File Finder can help you find the duplicate files that are located in one or more folders. Duplicates are presented as groups, and you can check either manually the files to process or use the auto check feature to automatically check the files with the old file dates. Additional options allow you to exclude files to be auto-vérifier if they fit certain criteria (extension, size, string etc.). Selected files can then be deleted or moved to another folder. Other features include a built-in preview, file system, support for removable media protection and more.

  http://www.SnapFiles.com/get/fastdupfinder.html

• Is it possible to direct "log entry" for a syslog server-specific ACL?

  R1 (10.177.142.1)---f1/0 R2 f1/1---(192.168.1.3)R3

  I want to apply a mild access list on R2 only in order to connect
  entries and let me evaluate and find out how many users help
  TELNET, www, and 3389 (RDP thing) protocols
  from R1 go to R3. I can't block all traffic yet.

  So my journal on R2 works accordingly to log for TELNET, www, and RDP - OK entries.

  Question:
  Imagine I want to capture these logs for about 2 weeks and then analyze output such as
  source IP that generated these topics can you please tell me what is the
  best and easiest way to capture this in the newspaper to allow later analysis? I can put a syslog
  IP of the server that will be used only by this specific ACL WATCH_PROTOCOL?

  #show R2 access-list
  Expand the IP WATCH_PROTOCOL access list
  permit tcp everything any eq 3389 journal - entry (2 matches)
  permit tcp any any eq telnet log entry (36 matches)
  permit tcp any any eq www journal-entry
  permit ip any (226 matches)
  R2 #.
  R2 #show run | Access-Group Inc.
  IP access-group WATCH_PROTOCOL in
  R2 #.
  R2 #.
  00:14:38: % s-6-IPACCESSLOGP: list of the permitted tcp 10.177.142.1 WATCH_PROTOCOL (11
  008) (FastEthernet1/0 ca01.0e80.001c)-> 192.168.1.3 (23), 1 packet

  R1 #telnet 192.168.1.3 80
  challenging 192.168.1.3, 80...
  Connection refused by remote host %

  R2 #.
  00:14:38: % s-6-IPACCESSLOGP: list of the permitted tcp 10.177.142.1 WATCH_PROTOCOL (11
  008) (FastEthernet1/0 ca01.0e80.001c)-> 192.168.1.3 (23), 1 packet
  R2 #.
  R2 #.
  #show R2 access-list
  Expand the IP WATCH_PROTOCOL access list
  permit tcp everything any eq 3389 journal - entry (2 matches)
  permit tcp any any eq telnet log entry (36 matches)
  IP to allow all (67 matches)
  R2 #show run | Access-Group Inc.
  IP access-group WATCH_PROTOCOL in
  R2 #.

  This sounds like a job for Netflow.  I have provided links to the following documentation:

  Netflow configuration (12.2 mainline):
  http://www.Cisco.com/en/us/docs/iOS/12_2/switch/configuration/guide/xcfnfc.html

  flow-tools (to analyze netflow data):
  FTP://FTP.Eng.oar.NET/pub/flow-tools/flow-tools-0.66.tar.gz

  PowerPoint, linking the two:
  http://ws.edu.ISOC.org/workshops/2008/apricot2008/NetManage/presos/NetFlow/apricot-flow-tools-slides.ppt Let me know if this can help,

• IE Login error messages

  Related: basic troubleshooting. Hardware / Windows.

  When I open IE, I get these error messages:

  Script error

  An error has occurred in the script on this page.

  Do you want to continue running scripts on this page?

  If I click on YES or no... this message lights:

  Groove is blocked by Windows Firewall and cannot function properly.

  When I close this message... Here is this message:

  Welcome to Groove - Microsoft Office Groove

  Raphael Joseph Jr

  Ask for a password, then connect or cancel [I then CANCEL to access IE as I never activated Groove].

  Thank you.

  Hi Raphael,.

  Thanks for posting your question on the Microsoft Forum.

  I want more information, please answer the question below.

  1. you have installed Microsoft Office Groove?

  2. what version of Internet explorer that you are using?

  3. did you last changes made on your computer?

  This problem occurs because the HTML source of the Web page does not work with the script such as Microsoft Java Script or Microsoft Visual Basic script client-side.

  This problem may occur for one or more of the following reasons:

  1. a problem exists in the HTML source of the Web page.
  Active scripting, ActiveX controls or Java programs are blocked on your computer or on the network.

  2. Internet Explorer or another program, such as antivirus programs or firewalls, can be configured to block Active scripting, ActiveX controls or Java programs.

  3. anti-virus software is configured to analyze your records "Temporary Internet Files" or "Downloaded Program Files".

  4. the engine script on your computer is damaged or outdated.

  5. Internet-related folders on your computer are damaged.

  6. your video card drivers are corrupted or outdated.

  7. the DirectX component on your computer is damaged or outdated.

  Alternatively, you can follow the steps described in the following Microsoft article.

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260/en-us

  I hope this will solve the problem otherwise let us know.

  Thank you.

• Order to check the ability or the bandwidth between the VPN Site-to-Site Tunnel

  Hello

  How can we verify capacity/bandwidth between the end of the B-end of the site-to-site VPN tunnel.

  You can't very easily. The capacity and bandwidth dependent not only on your devices, but on a lot of devices and paths between them that you have no control or visibility.

  You can "show traffic" or common report on the use of interface using any performance management tool (cactus, which is gold, SolarWinds NPM, Cisco first LMS, etc..). Those usually do not distinguish between overall traffic interface and that due to virtual private networks. If you export the ASA Netflow data, you can break it down by remote IP address and which derive the use VPN. NetFlow records must be exported in tool like ntop, SolarWinds NTA or first LMS or Infrastructure to be useful.

  Cisco Security Manager will query the VPN statistics periodically and you Beach individual VPN or users to gather a bunch of queries, as it does on an ongoing basis.

• Please comment configtool.sh hung to 20% during the RA Web application deployment

  I have a distributed installation of PMCS version 11.1.2.1.  The application layer is a group of weblogic 3 node.  We applied a few patches at all levels and in the posteps we had to redeploy the RA application.  It worked well on the first node, but on others configtool.sh 2 following nodes hang himself after completing the first steps in the HSS and register before the preliminary steps on the RA to 20%

  We have tried everything I can think of to get around this

  error is

  Exception in thread "Thread-14" java.lang.NullPointerException

  at com.hyperion.config.document.StorageMisc.mergeVTConfigFiles(StorageMisc.java:279)

  at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:441)

  at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:90)

  at java.lang.Thread.run(Thread.java:619)

  What happens on 2 different nodes in the cluster

  
  

  I rolled back the patch on these nodes and tried to redeploy - who did not

  I opened a SR with Oracle and transferred the detail trace data that contained nothing substantial

  I even tried the utility of registry cleaning of 11.1.2.2 (at the request of supported) and that did not fix the issue

  
  

  any help would be great
  

  [The last entries in the configtool.log are/swpkg/oracle/hyperion/Oracle/Middleware/user_projects/epmsystem4/tmp/jazn-data4188527176104099455xml, modified [Fri Mar 22 17:51:25 EDT 2013]] [2013-06 - 21 T 14: 20:19.009 - 04:00] [EPMCFG] [PATH] [EPMCFG-02188] [oracle. EPMCFG] [tid: 20] [ecid: 0000JxbxiUKBl3IpIoG7yf1Hl9 ^ N000005, 0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] [more than 3 863 files exist in EPM_ORACLE_INSTANCE. Skip logging] [2013-06 - 21 T 14: 20:19.010 - 04:00] [EPMCFG] [PATH] [EPMCFG-02160] [oracle. EPMCFG] [tid: 20] [ecid: 0000JxbxiUKBl3IpIoG7yf1Hl9 ^ N000005, 0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] announcement of the end of the file [2013-06 - 21 T 14: 20:19.014 - 04:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle. EPMCFG] [tid: 20] [ecid: 0000JxbxiUKBl3IpIoG7yf1Hl9 ^ N000005, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Validation found for product raframework file

  Post edited by: MikePaladino After the release of configtool, we also see these errors [2013-07 - T 03, 16: 30:54.847 - 04:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle. EPMCFG] [tid: 12] [ecid: 0000JyaEk8cBl3IpIoG7yf1Hp8_U000006, 0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Impossible to analyze Hub record task priority: priority = null [2013-07 - T 03, 16: 30:55.097 - 04:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle. EPMCFG] [tid: 12] [ecid: 0000JyaEk8cBl3IpIoG7yf1Hp8_U000006, 0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Impossible to analyze Hub record task priority: priority = null [2013-07 - T 03, 16: 30:55.154 - 04:00] [EPMCFG] [WARNING] [EPMCFG-01011] [oracle. EPMCFG] [tid: 12] [ecid: 0000JyaEk8cBl3IpIoG7yf1Hp8_U000006, 0] [SRC_CLASS: com.hyperion.cis.ConfigToolDocument] Impossible to analyze Hub record task priority: priority = null [2013-07 - T 03, 16: 30:55.337 - 04:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle. EPMCFG] [tid: 12] [ecid: 0000JyaEk8cBl3IpIoG7yf1Hp8_U000006, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunnAllTasksState] trace: interrupted Configuration...

  We've thought of it.  Somehow the following folder was empty

  $EPM_ORACLE_HOME/products/biplus/validation.

  We copied the following files of the installation that has been working (below) from another node in the cluster WebLogic who worked and finished the deployment

  copy these files from the server well and it seems to have worked

  LS - ltr

  Total 504

  drwxr-x - 2 oracle oinstall 4096 Sep 17/2012 resources

  -rwxr-x---1 oracle oinstall 993 Sep 17/2012 validate.sh.template

  -rwxr-x---1 oracle oinstall 1039 Sep 17/2012 validate.bat.template

  -rwxr-x---1 oracle oinstall 738 Sep 17/2012 logging.xml.template

  -rw - r - 1 oracle oinstall 11580 Sep 17/2012 product_vtconfig.xml

  -rw - r - 1 oracle oinstall 481280 Aug 1 14:44 validate.tar

  resources /

  resources/raframeworkValidation_zh_TW.properties

  resources/raframeworkValidation_zh_CN.properties

  resources/raframeworkValidation_pt_BR.properties

  resources/raframeworkValidation_pl.properties

  resources/raframeworkValidation_it.properties

  resources/raframeworkValidation_ja.properties

  resources/raframeworkValidation_ko.properties

  resources/raframeworkValidation_nl.properties

  resources/raframeworkValidation_de.properties

  resources/raframeworkValidation_es.properties

  resources/raframeworkValidation_sv.properties

  resources/raframeworkValidation_fr.properties

  resources/raframeworkValidation_fi.properties

  resources/raframeworkValidation_ru.properties

  resources/raframeworkValidation_en.properties

  resources/raframeworkValidation.properties

  resources/raframeworkValidation_da.properties

  resources/raframeworkValidation_no.properties

  resources/raframeworkValidation_tr.properties

  Validate.bat.Template

• When vgscan/pvscan/lvscan

  I would like to know the difference between pvscan, vgscan and lvscan and the time of execution, which.

  pvscan - analyzes all records for the physical volumes

  vgscan - analyzes all records for the volume group and build/etc/lvmtab and /etc/lvmtab.d/* who are the database for all orders of lvm

  lvscan - scan (all disks) for logical volumes

  Best regards

  Mark Ramos VCP 3 & 4

• VST/AudioUnit plugins appearing is not in first Pro CC

  Hello

  Recently, I have the bought the bundle of plugins-slate Virtual Bus Compressor and hoped to use in first Pro CC on OSX 10.8.4

  Currently, the plugins will not show at first, but show in hearing. I expect that they share the same engine, when it came to analyze and record VST and Audiounit plugins.

  All the other plugins by this society show and works without any problem on the front.

  Is it possible to get the first to update the list of plugin so that it can "see" the new plugins?

  I bought these plugins once I installed CC first so maybe that has something to do with it?

  It was not clear to me, but have you visited the new Audio Plug-in Manager (drop-down menu in the effect controls panel)?

  

  In general, we try is more of third party plug-ins scanner audio on each launch because there is too much bad plug-ins that could crash the application or 30 000 reminder for dongles screens and such.

  Also, what version of hearing you compare against?  If it's the CS6 Audition, then there will be 32 - bit plug-ins that appear there, but will not be displayed in hearing CC or first Pro CC than these two 64-bit applications and cannot load 32 - bit plug-ins natively.

• Between 5.5 and CS4 color management problems

  I'm faced with a problem of color management and would be very grateful if someone could help me with that.

  I'm working to create in inDesign CS4 (6.0.6) and using my usual color management settings. I set up at the bridge in my CS4 and then use in InDesign, Photoshop and Illustrator. My settings are for jobs printed here in the United Kingdom, as follows:

  ---

  Workspaces

  RGB: Adobe RGB (1998)

  CMYK: Coated FOGRA39

  Color management policies

  RGB: Convert in the workspace

  CMYK: Convert in the workspace

  All three 'request when opening' checked

  ---

  Then I have a customer takes the file InDesign me, working there and returned to me to complete the development and execution of the high pdf - are for printing. It runs the latest InDesign CS5.5. I have him ordered to open InDesign and set his Edit > color... settings as follows without any open file is by default (am I do this bit correctly, it will work through all the files I send?):

  ---

  Workspaces

  RGB: Adobe RGB (1998)

  CMYK: Coated FOGRA39

  Color management policies

  RGB: Preserve embedded profiles

  CMYK: Preserve embedded profiles

  All three 'request when opening' checked.

  ---

  We did some testing and it doesn't work. It can open and work on the file ok and I see text changes she did without any problems.

  But when I analyze his record returned in detail, I can see that his record is now showing view > test format > Document CMYK - us Web Coated SWOP (v2)

  that suggests something coming to an end that applies US profile. I can change the configuration of evidence to work: Coated FOGRA39, but prefer the US profile never made his reappearance!

  My apologies if I'm doing a very basic error or errors here, but I usually have my color management just on my own system, so this is new territory for me. If anyone can help with what I should advise him to do to an end, I would be very grateful (she is about 300 miles north of England, so can't easily try the options on his MacBook Pro myself!)

  PS I also noticed that some items on the page have been modified when exporting .idml to 80% of transparency-enough to fool me for a while that the colors had changed over those too, when in fact I don't think that had anything to do with the issue of profile, probably just a bug between economy of process CS5.5?

  The easy way to get your colleague to use the settings that you want, is likely to create a .csf (color settings file) by pressing save button in the Edit > color... Settings dialog box, then having his press office in the same dialog box and selecting your .csf you sent.