Animations on black start with an unwanted white flash

Similar Questions

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.

• Pavilion dv6 - 7013cl - black screen with caps lock led flashes constantly at startup.

  The laptop was running hot. I cleaned the dust from the fan area. The battery is bad. I checked the voltage on the charger that was 43v - bought a new charger is 18.5 v. I wiped the ram and started with one and moved to different positions. I have now a black screen with the cap lock key blinks blue continuously and the f12 key led light ceases to orange. Any suggestions what I should try next and which snaps the seeing Cap continuously flashes means - that is a code or have a meaning?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Satellite C650D-007 starts with a blank white screen

  Hello world

  I need emergency aid, 3 weeks ago, I bought this new laptop from Futureshop.ca and now, today, I pressed the power button to turn it on and when it does I get this white screen of white.

  I even tried removing the battery and connect the AC and it always produces the same thing.

  I can't believe after that only 3 weeks it has stopped working.

  PS: it feeds on. just a white screen empty. No logo nothing.

  Thanks in advance.

  Hello

  In the past I didn't had this problem but it must be hardware related issue, so you need to do is to contact Futureshop, explain the problem and ask for replacement.
  Second option for you is to contact the nearest Toshiba service directly. They can check your laptop and replace the defective hardware.

• start with irritating music - shockwave flash plugin?

  today when I started firefox it started spontaneously 'music '. If I disable the shockwave plugin, the music stops but restarts firefox restarts the music.
  Where to find what is the cause?

  This has happened

  Each time Firefox opened

  == Now since I last used my PC 2 days.

  Caused by an audio file in the page of Google - their 30th anniversary of PacMan. Disable the extension CoolIris Previews or get a updated version of this extension on the site of Coolpreviews.

• Re: Satellite L300 - black screen with flashing white cursor

  All of a sudden my laptop won't start more. It turns on, displays screen toshiba for a second and then goes to a black screen with a blinking white line in the upper left corner. I can't type something here! The last time I used it it was 100% very well, I have not downloaded anything so I'm very curious to what it might be.

  Help, please!

  Hi mate,

  Maybe something messed up to the top of your Windows installation and if the computer may start t more or your HARD drive becomes faulty...

  You can access the BIOS? If so, check if your HARD drive is recognized. If so I think that it of necessary to reinstall Windows. Therefore, take the Toshiba recovery disc.

• Am I the only one annoyed by the flashing "start with Lightroom Mobile" in Lightroom?

  Any time, I move the cursor to the upper left of the Lightroom work screen, to export an image or open another catalog, white 'Get started with Lightroom Mobile' text flashes quickly on the screen in a way that suggests, to me, a cheap on a Web page advertising mobile.  I bought access to Lightroom, and I think it's lame that Adobe should use such a method to get out their products to users.  If I buy the Mobile with Lightroom, this mean that whenever I try to close the program or perform another mundane task, that "Get Started with Lightroom for Mac/Win!" starts flashing on the screen?  And why stop there, Adobe?  It is an advertising space now, so feel free to create a ticker for your new products and services and good, why no time, too?

  I'm sure it's only a continuation of the slow creep of advertising into every moment of life, and I have, on the one hand, say thank you Adobe!  I certainly do not get enough of that already!

  If you don't want to see, click on the menu just drop down to the right of the view and choose one of the options to turn it off. I don't remember what it is, but you can disable mobile Lightroom. It's your choice.

• Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Open a book, tap, tap of he two, disable auto-nuit theme.

  

• HP Pavilion laptop g6: black screen with white cursor, connect

  My laptop is a few years old and today after I log in, I get a black screen with a white cursor. I read a few threads on the forums and have tried to take the battery out and pressing the button for 30secs-2mins (tried twice). I can access everything ok in Mode safe, so made a malware bites scan & clean registry. No maleware was found and I rebooted, but always the same black screen when you connect in normal mode. I tried to access the Advanced tab in the BIOS to make the test hardware, but I do not have this tab. I'm out of ideas. Help, please

  B_S2

  Hello;
  
  Let me welcome you on the HP forums!
  
  As it works OK in safe mode, then it's SOMETHING that is loaded at startup which is screw up the display.  Could be a runtime program. could be drivers, might be a Service.

  No easy way to tell.

  Demarrer start in safe mode, type MSCONFIG in the start area.  When that opens, turn off ALL startup items. Reset.

  The PC now work, if one (or more) of these numbers - and you have to go through a tedious process of re-enabling them one at a time until the PC fails again.  The last of them that you re-activated was the problem.

  Here is a tutorial on how to do it: http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/

  If the PC still does not work with all startup items disabled, then return to msconfig and click on the Services tab.  Check the hide services Ms.  Then turn off half superior Services.  Reset.

  If the problem is resolved, you will need to go through a tedious process of reactivating a Service at a time until you find the one that is the problem.

  If the problem is not resolved, turn off the other half of the services.  Repeat as above.

  No easy way to do...

  Good luck

• Black screen with white cursor at the end of the New Installation

  I try to perform a new installation of Windows Vista Home Premium (64 bit) on a Dell Inspiron 1545. The hard drive was completely wiped out and I don't have the original disks (I use a Vista CD from another computer Dell). Installation is proceeding normally up to the phase of "Complete installation" where it crashes for almost an hour and then goes to a black screen with a white cursor.

  I have tried all the following suggestions (found here and on other sites online):

  Reset the BIOS has no effect.

  By pressing SHIFT 5 times has no effect.

  CTRL + Alt + Delete has no effect.

  Rename to the event log file has no effect.

  Remove one of the memory modules if the computer has only 2 GB installed has no effect.

  Running CHKDSK finds no error, and has no effect.

  The attempt to start safe mode causes hang crcdisk.sys.

  Try a normal boot hangs at the screen loading w / loading scroll bar "stuttering".

  Startup Repair runs for hours with no results (I said to cancel after you let it run overnight only to find it still 'work' in the morning)

  Does anyone have suggestions more?

  Thanks in advance! : D

  Dell Media you are currently using may not have drivers appropriate for your PC.

  Contact Dell technical support (have your number of ready service if they ask for it) and ask for the "recovery media" to your specific model number. There may be a small fee involved.

  http://www.Dell.com/content/topics/global.aspx/services/en/dsc_home?c=us&l=en

  J W Stuart: http://www.pagestart.com

• Black screen with white cursor. Impossible to load Windows or even download a new copy

  I had Windows Vista on my computer and I got a virus. None of the antivirus working to clean the infected files and clips failed as well. So I decided to run repair system and it to halfway through, my office has crashed. I turned it our with the restoration of the vista disk and has no load. Then I attepmted to install a new copy of windows 7. It wouldn't load and I still get the black screen with the white cursor. I have therefore load Linux Mint and it seems that I can only have linuc on the computer. I deleted all lartitions because the partitions have been affected by the virus. Help, please. I need windows 7!

  Hello

  1. when exactly this problem?

  2 did you change on your computer?

  I suggest you remove any external devices.

  I also suggest you insert the DVD and try to install windows 7.

  I also suggest you to go BIOS and select CD/DVD boot as the option your priority and check.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I suggest you to follow the links and check out how to install windows 7.

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Installation of Windows 7: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-frequently-asked-questions

• Why do I get a black screen with a white cursor?

  I have a Gateway DX4200 with Windows Vista Home Premium 64-bit. Two weeks ago I shut down my computer up-to-date, since then, I can't download Windows. I get a black screen with a mouse cursor white that I can move but it is. I have tried several things but nothing seems to work. I tried pressing F8 and repair this way and safe mode does not work. When I press Ctrl-Alt-Del or any other key.

  Hello

  You receive an error message?

  Method 1:

  I also suggest you to follow the steps and check.

  a. Insert the Windows vista installation disc in the disc drive, and then start the computer.

  b. press a key when the message "Press any key to boot from CD or DVD".

  c. Select a language, a time and currency, and a keyboard or input method, and then click Next.

  d. click on repair your computer.

  e. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  f. in the System Recovery Options dialog box, click System Restore.

  g. follow the instructions in the System Restore Wizard and choose the appropriate restore point.

  h. click Finish to restore the system.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

• Black screen with the white underscore

  Hello
  I started most recently problems with my PC. It's an Hp pavilion slimline s7713w. The problem is that I get a black screen with the white underscore once he gets past the start screen for Hp. I have recently updated my RAM and my monitor but I need to download the video driver. I do not have the chance to update.

  Oh don't worry, I just went out and bought another computer, but I thank very you much for your help.

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• Satellite Pro M40 sometimes starts with white screen

  Hello!

  I'm pulling out my hair with this problem.

  For no definable reason that according to me, my laptop will start with a blank screen.
  Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
  For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

  My M40 is 4 months old.
  Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

  This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
  I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
  Today, however, not a week later, I have a white screen again.

  I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

  If anyone can help, or was faced with a similar problem, please respond.

  Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

  [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

  I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

  I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

  Post edited by: jazziefox

  Hello

  Thank you for your update.
  It's a very strange question, and it would be very helpful if you can put yourself more observational.