ANNOYING automatic uploaded image in Windows resizer

Similar Questions

• Uploaded image of Windows 7 Professional will not accept the product key that came with my computer.

  I have a Dell laptop, Studio, approximately 1 year, delivered with Windows 7 Professional installed - the label with the genuine product key is located at the bottom of the laptop. Shortly after I got it I deleted the recovery partition to make room for Linux installed next to Windows. I had problems with Windows system (mainly caused by me bad installation software and drivers without proper backups) so I decided to reinstall Windows. I had already deleted the recovery partition and wouldn't use it anyway because I prefer a clean system without unwanted from the manufacturer in this regard. I did not receive a Windows operating system installation DVD with my computer, so I downloaded a (64-bit Windows 7 Professional, the same as the original operating system) which already had SP1 on it (the version of Win7Pro installed Dell's not SP1). I installed Windows on this drive and attempted to activate using the product key that came with my computer, but it would not accept the key. I don't have time to try to solve this problem, but now the period of one month is up and my computer does not work correctly.
  I suspect that the problem may be due to me using the SP1 disc. If this is the case, should I reinstall Windows again? I have * NOT * GOING to buy another product key when I have already paid for a genuine version of Windows. I just want to be able to use my computer without the ridiculous slowdowns caused by pre-installed software and the way I chose.

  Thanks for any help with this problem, I really need fo fix my computer.

  original title: Activation error, Windows 7 Professional
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  Windows license Type: OEM SLP

  The key to your report is your OEM SLP key which can not be activated. This isn't the key to COA.

  but the key I tried to use is what I copied on the COA the day I got the computer of the book where I put all the information on my computers.
  
  
  Is the product key in your book is the partial key in your report?
  You must change the product key to the one on your COA.
  Check your compartment of the COA.
  The other solution is to reinstall your Dell OEM recovery disks or recovery partition. This self will activate your computer.
  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Large Images in Windows Photo Gallery

  I use Windows Vista Ultimate Edition. After the digitization of slides using a scanner Plustek OpticFilm to 10000 DPI, I am unable to open images in Windows Photo Gallery. I get this error - 'Photo Gallery can't open this photo or video. The file appears to be damaged or corrupted. »
  The images are very well because I can open them with other applications.
  5000 DPI images open fine. I hope someone has a solution.

  Hello martinw56,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with that!  Have you tried the steps below with respect to the scanning of a picture with Windows Photo Gallery?  Do you have in the past been able to scan pictures with your current scanner and upload pictures to the photo gallery?

  Please let us know status.  Thank you!

  Scan a picture
  http://windowshelp.Microsoft.com/Windows/en-us/help/66c76a19-97e7-492d-b3bf-a9c574c81f521033.mspx#ex

  Before you begin, make sure that you have installed the scanner to the computer and the scanner is powered.
  1.	Windows Photo Gallery by clicking on the button Start , allprograms, and then clicking Windows Photo Gallery.
  2.	Click fileand then click import from device scanner or photo.
  3.	In the window import pictures and videos , click the scanner that you want to use, and then click import.
  4.	In the new scan dialog box, click the list of profiles , and then click the picture. The default settings to scan an image appear automatically.
  5.	If you're using a scanner with a document feeder, click the paper size list, and then click the size of the image that you have placed on the scanner or click on the size that is similar to the image.
  6.	Click the color format list, and then click the color format that you want the scanned file to display.
  7.	Click the type of file list, and then click the file type that you want to use to save the scanned file.
  8.	Click the list Resolution (DPI) , and then click the resolution, in dots per inch, that you want to use.
  9.	Adjust the settings for brightness and contrast, or type the values that you want to use.
  10.	To see how the image will appear when it is scanned, click Preview. If necessary, change the scan settings, and then preview the image again. Repeat these steps until you are satisfied with the results of the overview. Some scanners may require that place you the image in the charger whenever you are scanning.
  11.	Click on scan. When the scan is complete, Windows Photo Gallery invites you to mark the image so that it is easier to organize or find later.
  12.	In the list tag these pictures (optional) , type a tag name, and then click import. Windows Photo Gallery displays the picture, so you can view, difficulty or organize.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• "Winword.EXE - bad image" "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try the program mode.

  Original title: 'Bad image 32 system error'

  Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

  This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

  It seems that the C:\Windows\system32\bitsprx532.dll file is related to malware.  Examine for example the Uploader on VirusTotal.com and checking the results provided here.

  Scan your system with the free version of MalwareBytes AntiMalwareand see what it finds.

  Check with Sysinternals Autoruns for entry autostart referencing bitsprx532.dll and validate its location (in the autostart list).

• BlackBerry Smartphones HTML Email 'Automatically download Images' does not work

  I use the BIS service with 4 separate emails, (paid 1, 2 free on the web and 1 BB email) using a Blackberry Storm 9530 with Verizon Wireless service...

  I have this setting enabled for all of my emails, to automatically download images and display in HTML... but no email no. Everyone I get I have to manually, select options and upload pictures! How can I fix this?

  Hello!

  See this KB:

  • KB15254 How to configure HTML email support on the BlackBerry smartphone email

  It sounds like you already have the correct settings. But, at the bottom of this KB is a statement about the external link images... If the image is linked to the outside rather that integrated, you will still need to manually get the image.

  See you soon!

• Is it possible to see the names of the places for the uploaded images of office?

  I downloaded several collections of images Fund (lightning, moon, scenery, etc.), but cannot see where these images are taken.  My office of Bing puts a new picture every day and I can move my cursor over the "i" zone and see where he is.  Is anyway to do this with the uploaded images?

  Thank you!

  Hello

  Thank you for contacting Microsoft Answers.

  Details of the images found in the Details tab of the image properties. If you do not see such a thing, you cannot find the location without the support of the photographer.

  Usually, these days, cameras equipped with GPS are available. They will download the information of location automatically, if the option is enabled, and you can easily find the location, according to the coordinates.

• No image with customized image of Windows 10 Acer Iconia W510

  I'm trying machines Acer Iconia W510 image with an image of Windows 10 we did. We have already photographed a few tens of individuals. A dozen, however, refuse to take the picture. They are currently on Windows 8. The image on an external hard drive that plug us into the USB port.

  The steps I take to the imaging process are as follows: "Change PC settings"->"update and recovery"-> "recovery"->"Advanced startup" and I click on the button 'Restart now', who sends me to a screen with three options, continue to windows 8.1, troubleshooting, and turn off your PC.

  I select 'Troubleshoot '->' Advanced'-> "Image system recovery"

  The Acer screen appears with "Preparation of the system image recovery" at the bottom. I sign in the administrator account when prompted to choose an account.

  A window appears and scans for images. I selected the "Select a system image" option and then select the correct image of Windows 10.

  Then, I select the only available option for "select the date and time of the system image to restore.

  After that, there is a message that says "for the restoration of this computer, needs of Windows to format the drive that the Windows recovery environment is running on." To continue with the restore, shut down this computer and it boot from a Windows installation disc or a disc repair system, then try the restore again. "At this point, I have no way to continue.

  Even if I plug the USB recovery drive we used, I get the same message. I don't know what the problem is or how to get past. Any help is appreciated!

  Hi Ryan,

  According to the description, you can not install updates and the this issue may occur if one or more of the following conditions are met: 

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  Try it out below mentioned methods and see if it works for you.

  Method 1

  First of all, I suggest you run Windows update troubleshooting tool to get the problem automatically detected and corrected. This fixit checks the configuration of the Windows Update components and repairs, fixes incorrect Windows Update the locations of data and records of necessary services. For the race, the troubleshooter refer to sub article what can I do if I have problems to install updates.

  Windows Update: FAQ

  Method 2

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 3

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Keep us.

  Kind regards

• I opened one of my projects of recorded video but all uploaded images display a message red screen "Media disconnected". What is the cause?

  I opened one of my projects of recorded video but all uploaded images display a message red screen "Media disconnected". What is the cause?

  Download means to transfer data from the internet to the computer.

  If you double-click the file missing in the assets of the project, it will open a window saying where is so and so file.

  Navigate to the file and click OK.

  The rest of the files could follow, perhaps brought to them all separately.

• The latest changes to the 'Upload to the FTP host' function has made it useless - no point using a program such as Muse if I can't easily and automatically upload work to the Web server.

  The latest changes to the "Upload to Host FTP" function made it useless - no point using a program such as Muse if I can't easily and automatically upload work to the Web server.  I use BlueHost webhosting with a main area and I have several domains with this account (such as subdomains or folders on this server) - with older versions of Muse when downloading pages it simply opened a warning window to tell me (what I already know) the Web site I am downloading does not point to the main domain BUT now Muse is trying to create a new folder separated into the root directory of the main domain. completely ignoring the directory path that I am giving him - useless!  Why do these crazy changes to the program - and so often - it is very frustrating as amateur ware!

  Hello Stephen,

  There are some problems with the download of ftp through Muse, who knows the team of engineers and those will be corrected in a future version of Muse. At this point, the work around would be to export the html code of Muse and then download via some third party client like filezilla ftp.

  I would recommend that you keep an eye on our page of release notes to get updates more about it - Release notes | Adobe Muse CC

  - Abhishek Maurya

• CS5 avoiding window resizing when the zoom in/out

  Is it possible to PS CS5 to stop window resizing Image every time that I zoom out / in, I like to work with a boarder around a picture, so I can easily see the edges, but each time as I Zoom in / zoom out I have to resize the main window to accommodate the Image, it's boring and adds many extra clicks to my workflow If anyone has any ideas please let me know.

  Thank you, in advance, Nick

  Preferences > General > Zoom Resizes window

• Permission denied after Upload Image

  Hi Chaps,
  
  I have a script to upload image that works on my Apache on the server development IIS, but the Apache Lunix server, although the images are downloaded properly and the MySQL database is updated correctly, I can't see the images.
  
  Viewing the HTML source code, check the FTP files and database values, all look OK.
  
  But the picture does not show, just the white box with the Red Cross in the corner.
  
  If I try to copy the shortcut from the image and open it in a separate window, I get the following:

  Quote:

  bans that have permission to access [path to image]

  I'm not sure what to try next, it seems strange that the source/database / files look good but it just will not appear!

  
  
  I tried both $HTTP_POST_FILES and $_FILES to download images, but both have the same result.
  
  If anyone has any ideas, please help!

  Have you checked the file permissions?

• ISO image of Windows

  I am trying to install Windows XP (the ONLY OS that will run a specific software that I need) on my Mac mini (beginning of 2009-compatible with Windows XP installation DVD that I have), I find the instructions to create an ISO image of Windows. Someone has explicit instructions on how to do it and is it essential? Thanks for your help.

  iso is a copy of an optical disc, you can read more of his https://en.wikipedia.org/wiki/ISO_image e

  There are several ways or create an iso file osx do iso OSX file

  If you do not need to run 3d games is a lot less hassel to install xp on a virtual machine like oracles free virtualbox https://www.virtualbox.org/wiki/Mac%20OS%20X%20build%20instructions it you have to worry not special drivers for the mac mini for stuff to work

• How can I get Thunderbird to start automatically when I start Windows

  I would like to than Thunderbird to start automatically whenever I start Windows running. It is how I get my calendar early alerts.

  This would be a feature of Windows rather than a feature of Thunderbird.
  http://Windows.Microsoft.com/en-us/Windows/run-program-automatically-Windows-starts#1TC=Windows-7

• Safari doesn't remember the window resizing

  Using Safari Version 9.0.3 in Yosemite.  Safari NEVER remember the size of the window that I put it to the previous use. Does anyone know how to make Safari window resize the stick?

  Thank you!

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.Safari.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

• How can I remove the user name and the image of Windows XP new Start Menu

  Two questions:

  1. How can I delete the user name and the image of Windows XP new start; and

  2. my computer keeps asking me to press the F1 key to start Windows.  How to skip this part?

  Thank you.

  Hello

  The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.

  For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 1:

  a. start Windows Explorer and go to this folder:
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account images

  b. in this folder, rename the BMP file that corresponds to your user account.
   
  (For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)

  c. then rename the following folder:

  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
   
  to something else, for example,.
   
  C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.

  Step 2:
   
  To remove the user name, follow these steps

  a. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
   
  HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorer

  b. in the right pane, the value NoUserNameInStartMenu-value data 1.

  c. close Regedit.exe and restart Windows.

  You'll find yourself with a blue area at the top of the Start Menu.

  Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?

  You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.