Answer question 6500 wireless fax

I was just off a cannon MFP HP 6500, instructions aren't really good!

My question is that the HP can be set to auto-answer, which is a pain when you also have an answering machine connected to the line, so I turned off auto-answer, I just used the land line and noticed the MFP out of Eve as Canon has done, this means that the 6500 will listen to the line (even with auto answer off) and if she hears a fax carrier will pick up? I hope that the answer is Yes and that's what would make the gun, but there is no mention of this feature in all the instructions I've read.

David

Hi David,

I work for HP and noticed your post. Since I am familiar with the printer you mentioned, I thought I will answer you.

This printer will be picking up the incoming fax when he hears the fax tone, even if the line was actually answered by the answering machine. So that this works, there are a few conditions.

(1) the printer should be set to auto answer. Is there a button to auto-answer on the right side of the front of the printer next to the switch.

The fire must be turned on.

(2) the number of rings must be set higher than the answering machine.

If the answering machine takes up to 2 rings on the printer 3 or more rings. (This will essentially turn on listening)

The number of rings can be set by pressing the setup button on the front panel of the printer, right to the Basic setting Fax arrow, select OK, then right arrow to rings before answer.

(3) the answering machine must be connected to the printer and not any other wall jack in the House. In this way, the printer can control the answering machine records the sound of incoming fax, etc.

I hope this answer helps. Im not tech support im not sure it is adequately fits your needs.

Concerning

Patrick

Tags: HP Printers

Similar Questions

  • Cannot receive faxes officejet 6500 wireless

    Hello

    I suddenly have problems to receive faxes. Alone was able to cross over early today, and as I understand it, it took 8 minutes to my fax machine to connect. I get error reports saying type is "received" and result in "error 244 *.» I tried instructions support on the HP site, and those who, unfortunately, were not very useful. One thing, I thought may be useful was turning power switch on the ECM - however, it is not all the instructions to do it on my model!

    I have the HP Officejet 6500 Wireless

    model E709n

    Running Mac OS 10.7.4

    My Fax is on a separate phone line: it's a VOIP line I've had for quite some time

    Any help is greatly appreciated! Thank you!

    Take a look at the link below, you will find a resolution hopefully:

    http://support.HP.com/us-en/document/c01661987

    Let me know if you need additional assistance. I'm here to help. Thank you!

  • connect the fax and scanner on HPofficejet 6500 wireless

    HP Officejet 6500 wireless. to the PC, a Toshiba. Problems showed up to 4 months, this has been resolved by directly connecting (wired).  The printer prints, but the Fax and Scanner are not detected.  The machine is an all in one.

    Hello

    Your printer is a network printer, you are better plugged into the router and configure it with the HP software.

    Then use it with the management software provided by HP.

    AIO devices aren't devices such as hard drives, DVD, network, etc, they do not adhere to established standards and must be used with the software of the provider.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Officcejet blue 6500 Wireless - vertical lines on scans and Copies - cannot fully open ADF

    HP Officejet 6500 Wireless - problem with vertical blue lines on documents when you use the automatic document feeder.

    Brush the dish is very good. I'm looking for here for quite awhile now and I... all suggest to clean the glass in the ADF tried. I can't open more than 3cm. It is enough to get to about a cloth inside, but nowhere near enough to clean it properly, or even see if there is something on it to clean.

    I have followed some tutorials online already and am following the steps but just can not open fully.

    If this isn't the dirty glass, that is the question, is there anything else it could be? If I copy through the ADF it prints also vertical lines.

    The above poster is right, more often, the vertical lines in the analyses is caused by dust, debris, or marks on the glass of the scanner. The best way to remove these lines is to clean the glass with a lint (like a lava-glass cloth or a coffee filter) and some filtered water. If the printer has an ADF Assembly on top, some printer models require you to open the part of the printer to access the ADF for cleaning glass.

    Here is a video on the market: https://www.youtube.com/watch?v=-_jaaLwsufs

    Generally wrinkles caused by dust/debris will be black. In some cases, if the color is visible (as above) it will adopt the color on the glass (colour copies/scans only). If you have several lines of several colors, it is entirely a different matter. I resolves this problem by unplugging the unit from the printer and the wall jack for 30 seconds and then turn the unit back.

    I hope this information is useful!

  • HP OfficeJet 6500 wireless do not print because there are 2 days, I changed my wireless router

    Original title: print printer print

    My HP OfficeJet 6500 Wireless will not print because 2 days ago, I changed my wireless router. The printer is no longer under warranty and I'm using Windows 7 OS. I have

    Assuming that there is a wireless connection to the printer, the most likely cause of the problem is that the printer is configured to obtain its IP address automatically, and the new router has assigned to the printer an IP address that is different from that which was initially awarded.

    To check if the above is the question:

    Controls on the front panel of the printer allows you to print a Network Setup page:
    From the home screen, press the right arrow, and then select Setup.
    Touch reports, click Network Configuration Page.

    Find the IP address of the printer on the Network Configuration page.

    On your computer, go to devices and printers

    • Right-click on your printer icon, and then select "printer properties".
    • Click the "Ports" tab
    • WITHOUT clicking anywhere in the list of ports other than the right scroll bar, find the line highlighted (the one with the box in the box)
    • Is the 'Port' the same as the IP address of the printer that you noted on the Network Configuration page?
    • Assuming that the port in the printer properties dialog box is not the same as that shown on the Network Configuration page, click the "Configure Port" button and enter the correct IP address in the box "printer name or IP address.
    • OK your way out

    To avoid this problem does not happen, read the User Guide for the your printer and configure the printer to use a static or fixed IP address.  Choose an address that is in the same subnet as the router but outside the range of addresses used by the DHCP server on the router.  You can find this information on the configuration of your router utility.

    For example, most Linksys/Cisco routers use the IP addresses of the form 192.168.1.x and allocate addresses in the range 192.168.1.100 to 192.168.1.150.  In this case, you should take a static IP as 192.168.1.20 (20 is outside the range of 100 to 150).

  • Why my HP Officejet 6500 Wireless scan documents on my computer?

    I have a printer HP Officejet 6500 Wireless. I can print wireless from my PC to the printer, but when I try to scan it says "no option to Scan." Refer to device documentation to troubleshoot. Press OK. »

    I tried troubleshooting but nothing seems to work. It doesn't make sense to me that the printer works but the scanner does not work. The printer and the PC are certainly talk to each other, I can't just scan.

    Help, please!

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/how-do-I-enable-Web-scan/TD-p/1109565

  • HP 6500 Wireless does not scan

    The printer works fine for printing, but it does not scan.

    When I select scan on the officejet 6500 wireless it is said: 'SCAN MENU SELECT a COMPUTER' any key on the keyboard work only 'OK '. When I select OK it says "No. Scan Option - refer to device documentation to troubleshoot. Press OK. »

    Operating system: Windows 7

    Connection to a printer wireless

    Download/driver downloaded and installed oj6500ve709_basic_14

    Mahalo (thank you in Hawaiian) in advance for your help.

    Hi soccer_crimson,

    Follow the attached document for your Officejet 6500 printer model.

    Steps to follow for issues with WIA - Windows Image Acquisition:

    Follow the steps below to check the WIA Service:
    1. type services.msc in run or search and files program
    2. scroll the page up to the WIA Windows Image Acquisition
    3. make sure that the service is running. Click on stop and then restart to ensure
    4 restart the computer

    Restart the services of dependencies:
    1. Click Start, in the search box type "services" without the quotes.
    2. scroll down until you see Windows Image Acquisition (WIA).
    3. double click on it and go to the Dependencies tab.
    4-2 services must be listed.
    5. close this window and look for the remote procedure call (RPC).
    6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
    7. go to hardware detection kernel and Double click.
    8. set the Startup Type to manual and click on apply.
    9. you should be able to start the service by pressing Start.
    10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem

  • How to get assistance from mozilla to answer questions for windows when I use a macintosh computer

    How to get assistance from mozilla to answer questions for windows when I use a macintosh computer?

    Look on the right side of the knowlegde base articles, where it is said ' help to ". Here, you can change the operating system and the version of firefox. The content of the article will adjust.

    If you ask a question on the help forum, you can simply say this in your question.

  • How to print on my hp officejet 6500 wireless from my ipad?

    When I try to print with my ipad via airprinter I get a message "No Printers Found AirPrinter", I have a HP officejet 6500 Wireless, what should I do?

    Hi Gynmom,

    I see that you experience problems printing from your iPad to your printer.  I would like to try the following steps.

    1. unplug the printer and the router for a minute.

    2. turn off your iPad.

    3. connect the router to the top.

    4. wait another minute plug printer upward.

    5 turn on iPad.

    6. try to print again.

    Let me know how it goes.

  • Efficiently answering questions?

    How everyone here doesn't answer questions? Is there an easier way rather than refresh the new page to open in tabs, closing, repeat.

    Can u explain that you have begun to explain? Please

  • Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro

    I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site.  I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software.  Scan worked fine until the last few months.  I get the message that "HP Scan Pro quit unexpectedly" or "Sorry, an unknown error has occurred", but no additional information.  I have re-installed the software HP twice but to no avail.  What can I do?

    Try the scan using the Image Capture in your Applications folder.  Click your scanner on the left side, click "Show details" on the bottom.

  • 6500 Wireless does not print

    Have a HP Officejet 6500 wireless.  Used without flaw for several years. About 3-4 months ago I lost the wireless capability. Have you used, but nothing has worked. If wired it and everything was fine. Last week there was an upgrade and it stopped printing altogether. I restart the computer and plug in the printer and I have a sound signal indicating he acknowledged the printer, but when I go to print it says it's offline. Suppose that I uninstall and re - install again, but someone can tell me what is happening? Windows 7, 32-bit Home Premium.

    I went to the registration documents and he had the printer listed as offline. Clicking on that shut down. So I went in my printers and the default was a copy of my printer. Here, there were two printers listed under the same model number, one saying it was a copy. Changed to no - copy as default and delete the copy. And it works. Still no wireless, but what the Hey, huh.

  • OfficeJet 6500 Wireless, and Windows 7

    While the basic print driver is built into Windows 7, HP has yet to release the complete software for the all-in-one OfficeJet 6500 Wireless.  Exactly when this installation of the complete set of software will be available for Windows 7?

    The full download of features for windows 7 will be available for your product at the end of January 2010.

    While I am an employee of HP, I'm not an expert on all our products. When I offer advice, I do not speak for HP.

  • Office Jet 6500 Wireless: print works do not showed "filter has failed."

    My Officejet 6500 wireless works very well on the scan, but will not be printed. It showed "Filter has failed" and paued on wirelss or plugged USB cable?

    Hi there @Hsiu

    Welcome to the forums

    I understand that you see a message "Filter failed" when you try to print from your Mac, with the Mavericks. I have a few steps that I would say that you follow below that should help you.

    1. Mac OS X: how to reset the printing system
    2. Repair disk permissions
    3. Restart the Mac.
    4. Follow this guide: install a printer Mac driver by using Apple Software Update
    5. In addition, to download this driver: HP v3.0 for OS X printer drivers

    Good luck, I hope it works!

  • HP Officejet 6500 Wireless printer prints blank pages. I have new catriges of ink in the printer

    My printer HP Officejet 6500 Wireless age of one year is printing pages bland, even though I just replaced my all ink cartridges.

    Here's a link below that can help you with this problem.

    http://goo.GL/XUtKe

    Let me know if this can help, thank you.

Maybe you are looking for

  • Satellite Pro M70 - cooling fan stopped working

    Hello I have a laptop M70, I have recently identified as not very hot when in use. I have now identified that the fan has stopped working. Any ideas how I can get this fan, so I give it a clean and check that the connected fan isn't loose etc.? Thank

  • Satellite A300 - Toshiba 1 3 - button controls do not work

    Hello. I have a problem of analog. Satellite A300 - 1 3 purchased, installation Winxp and sensitive buttons off value left for work. Today, I'll try the Bios version to check, but doubt that it influences it. Nothing is really present official Toshib

  • How would I go on a labview VI generation that has multiple functions of the device?

    Hi, I'm building a Labview Vi that needs to have multiple functions of the device. I need to have options of the Panel before which will show you the camera live stream without saving changes, on which option will show the live camera and record an i

  • Windows - Alt Key focus bug does not have to access the menus.

    Hello- I use Alt - Tab to move through my open applications.  After tabbing through open applications using Alt - Tab, and then selecting an application (such as Excel), the Alt key does not work the first time I click on it. For example, I Alt - Tab

  • Firewall wireless

    Hello people, Until last week, I network my 3 computers using Ethernet wiring wiring, where the hub / modem has a built-in hardware firewall. In this scenario, I was fine with the own Windows Firewall. Now, my computers are networked using a 2.4 GHz