Any resolution of problems of overheating/stuttering of the GPU from nVidia on T410s?

Similar Questions

• problems upgrading the GPU from nvidia 660 m at the start, 980 m-8 beep error code

  Alienware m17x R4

  Intel i7-3740QM CPU @2. 70 GHz (overclocked 3.49 GHz)

  32 GB memory corsair vengeance 4x8Go

  run GPU Nvidia Geforce GTX 660 m

  Ive been upgraded my laptop and updated my ram and hard drives, and bought a Nvidia Geforce GTX 980 m update kit. I know not how to change video and easily installed maps (grounding prevent me electrostatic and protect the card). passed to the map intel before the upgrade and after the first device manager start that he read as standard VGA adapter and its status is that it wouldn't start. I updated my bios and updated the driver for the pilot to 980 m from nvidia and changed the graphics card to the new by using the fn + f7 command and rebooted my computer.

  at the start he gave me a blank screen and the 8 beep error code. He looked up and I think it's a faulty card or bad memory on the card. contacted eurocom support and they think that there's a way to get it to work but I'm not so sure. It's the weekend, so they don't come back to me until Monday. someone at - it experience with this or know what I can do now? I am currently back on my card to 660 m.

  Everything you did before but not FN + F7 at the end. However, I'd install drivers Nvidia from Dell this time. The last Dell has is either 347.52 (WHQL-quality; you can get this driver from the Alienware support page 13/15/17 R2 on the Dell support site) or 350,12 (beta for Dell). There are also 347.90, but it is quite difficult to find a complete driver for this driver.

  When you uninstall the drivers of the GPU, use DDU. It's just a more sure way to uninstall the drivers.

• Install of new problem-unable to connect to the server from a remote client DB.

  Hi experts,
  
  I am new to set up a server oracle so pls bear with me...
  
  I have install a db Server (11g on top of Oracle Linux 64 bit) home (192.168.1.90 static). I checked that db, listener are running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network, but the server is not reachable. I got a ping from client and the server using IP addresses and host names. I followed the following steps to troubleshoot but could not go beyond the step 3, the server on port 1521 telnet-ing. Can someone help me what I need to do to make the port # (1521) is accessible by the customer?
  
  
  1. check with the 'ping' using the IP ('ping 198.11.34.43'
  2. check with 'ping' using the DNS (for example "tnsping uranus")
  3. try telnet to the IP address on port 1521 (telnet 1.2.3.4 1521)
  4. check with "tnsping" using the TNS service name
  5 call SQL * more of the line command «sqlplus fred@flintstone» operating system If this does not work, make sure your receiver is the defined service of flintstone.
  6 sign - on to SQL * more and connect with the name TNS ('connect fred/flintstome@service_name'
  7 in SQL *, try a select table@remote_db_link
  
  Thank you very much in advance.

  Hello
  (1) problem can be because of the firewall. Please check if the firewall turned on for your environment
  (2) check sqlnet.ora, you can allow requests only from specific systems

  Thank you
  Krishna

• Resolution of problem - unable to change to a lower resolution

  original title: resolution of problem, please help!

  The resolution on my monitor, I cannot go smaller. I can't move the resolution bar upwards or downwards

  and I am unable to change the screen type in the "display properties" under my control panel. Nothing I

  seems to fix the problem!

  Can anyone help?

  Thank you

  Hello

  • Create a restore http://support.microsoft.com/kb/948247 point
  • Start the PC in safe mode - F8 struck twice a second immediately after the ignition until you get a menu b & w, select Safe Mode from this menu. Don't worry strange messages or the appearance of the screen when he finally gets to the opening scene of session.
  • Log on as an administrative user - use admin if that is presented as a possibility
  • Click Start, click Run, type devmgmt.msc and press enter
  • Expand the display of the maps section by clicking on the +.
  • Right-click on any graphics contained therein and uninstall them
  • Restart the computer and wait that all devices to be detected again, select OK to all the prompts that appear, select automatic search if this option appears
  • Don't worry about the appearance of your screen immediately, once that all the material was again detected and installed, restart the PC again
  • Try to make the resolution changes after the second reboot

  If this messes up your PC use the restore point created in the first step to get things back the way they were http://support.microsoft.com/kb/306084

  After return if problems persist with details for further assitance.

  Tricky

• I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

  I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

  You may not have lost any resolution... or you can understand the word "resolution" bad

  Resolution isn't the file size, which are the numbers you are quoting. So the 1.3 MB changing to 542KB does not indicate a change in resolution. If you export the picture and let the box that says "Resize to Fit" disabled, so you don't waste no resolution at all, even if the file size has changed.

• Resolution / gambling problem please help me

  OK, I have vista 32 bit and when I get in any game at all and play... then get out of the wreck is fine... but then when I restart the Res changes again in the wreck the last game I played was set to and if the game does not have my native resolution it mess everything up on top of my desk and its starts to become annoying if someone could please help me because I really don't want to personalize then go to display settings and change every time that I log on... I tried to uninstall the latest software, tried to use the yahoo answers and they are not any help, MY RIG: AMD Athlon x 2 Dual Core 6000 + 3.1 Ghz, 8600 GT, 4 GB of ram, vista 32-bit , 22 inch monitor, native res: 1680 x 1050, Cyborg keyboard game... and I have IE8, any other information you need to know please ask me. Thanx

  Maniac of Vista,
  If you think that the problem started when you installed the Extreme 3D Pro stick, have you tried to uninstall it to see if the problem goes away?  Who will tell you for sure if that's the problem, you can access the web site of the manufacturer and see if they have a fix for this problem, or simply reinstall the software for the joystick could fix.

  You can also try to do a restore back before the problem occurred:
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know if this helped, or if you need further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• 12 - inch macbook (early 2015) does take STD to any resoluation?

  I'm reviewing using 4 K and Ultra HD TVs with your Mac - Apple support screens to see if my 12-inch macbook Early 2015 can support of STDS at any resolution. It lists the systems that can support 60 Hz, but I don't care Hz. basically, I try to see if there is any solution of double external monitor for the macbook.

  Under "views taken in charge and configurations" near the top of the article you attached, he explains that your machine can use 4 K and Ultra HD TV screens.

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Problem of overheating for Qosmio X 770 - 103 after installing Win 8

  Recently updated my material with a series of samsung SSD 840 and installed windows 8 pro (64-bit) (due to business needs).

  After you have installed windows 8 I ran Wizard upgrade toshiba, to get the drivers that I needed, the I updated my nvidia 320.49 drivers.

  The problem is that slow my PC works at 75 to 80 ° c (ambient temperature of 22 ° c), and if I run all the software it gets my temperature up to 85 to 90 on the side CPU on the graphics side card I have mount 74ºC inactive and in a chart driven app it gets 99ºC or 100 ° c and blocking my laptop.

  These temperatures are on average Setup 5 to 10 ° c higher than in my windows 7 (64 bit) and on my win7 the graphics card seems gas low performance in order to keep the time above 90 ° c 85.

  If anyone can help me solve this problem, because I can't understand what is happening or what drivers need to be modified, as appropriate.

  I compared the time using the same software in the two SO

  Current settings
  560 m from NVIDIA
  Intel core i7 2630QM (2.00 GHz)
  SSD - 840 Samsung series 500 GB
  Windows (pro (64-bit)

  Measured using Core temp and the temp software GPU temperatures.

  I n t have this Qosmio model but it will be interesting to know if you have installed the drivers offered on the download page of Toshiba only. I m not sure but I think that nvidia driver is not Toshiba.
  Am I right about that?

  > These temperatures are on average Setup 5 to 10 ° c higher than in my windows 7 (64 bit) and on my win7 seems to graphics card > gas low performance in order to keep the time above 90 ° c 85

  Is that Toshiba drivers are changed and don t allow overheating, but at the same time reduce the performance of the GPU. If you use the Toshiba-no driver, I can imagine that GPU now works without limit, but it results in more heat and better performance of equipment.

• I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  All calendars are enabled in the sidebar?

• Microsoft Fix it hangs on the resolution of problems

  I get an error whenever I go to Windows update and can not get updates. So I tried to use the Microsoft Fix - it tool, and it hangs just to solve problems.

  Hello

  I suggest you to see these steps:

  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Step 2:
  I suggest that you put your computer in a clean boot, try to install the updates and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Note:
  How to configure Windows to use a Normal startup state after using the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Having problems with the resolution of the screen from the 1st upgrade.

  Hello, I have a tower running Windows XP Professional Service Pack 3 and upgraded to Service Pack 2 of Windows Vista Business, and he had problems while improving the pc. I lived the degrading resolution and become more pixel and color has begun to degrade. It didn't happen until I updated. and now the upgrade was a success and the resolution of the screen was horrible. Color is distorted, and some icons are not yet. The resolution is 640 x 480 pixels and the color was at its lowest level. I changed the higher color bit and the graphic resolution is improved, but the size of the screen was always the same. I tried to put my monitors resolution which is 1280 x 720 pixels, but when I put it on this resolution, the quality and graphics began to become distorted and never changed size. then, once I applied it, it go back to the lower resolution and color. And I updated my computer during upgrade. Is there anyway that I can fix this?

  Thank you!

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  If no Vista drivers are available for your model the only advice we can give is to change the graphics card to a compatible Vista

  read the system requirements below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  Support for graphics DirectX 9 with WDDM and 128 MB graphics memory (32 MB for the basic home edition)

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm