Satellite L300 not connect to Netgear router

Hi, I wonder if someone can help me.

I recently installed a Netgear wireless home router. Although the Mac laptops and iPod in the House have all connected without any problems my Satellite L300 (PSLB8A-0VK004) is not.
Curiously however Island L300 connects to a public network wireless outside my house without any problem.

I have contacted Netgear, and they tried many things with me by phone. One of the operators of Netgear said it was a well-known problem of them and that he had a problem with Vista. They said I had to download Service Pack 2 for Microsoft (which I did) and the last 'Wireless drivers from the Web from Toshiba site'.

I went to the Toshiba Download Center, but the drop-down list, it provides does not my laptop from its selection model. Also if I manually scan through the list of available downloads, I see those who are "Netgear Wireless Drivers".

Can someone tell me where I can find these drivers?

THX

I think you Australian mobile phone model.
Have you checked Toshiba Australia support and download page?

Here is the link - http://www.mytoshiba.com.au/

Tags: Toshiba

Similar Questions

  • My Toshiba Satellite will NOT connect to the WiFi in my house of employers, but connects everywhere else I will!

    My Toshiba Satellite WILL NOT connect to WiFi in my house of employers, but connects everywhere else I go; I have Windows XP Home Edition SP3, and there a router Linksys WRT16ON. My network card is an Atheros AR5001X + Wireless Network Adapter (and says "this device is working properly". I tried disabling, entering all information, penetrates is not in the news was unchecking the "Enable IEEE 802. 1 x authentication"(and whenever I go in there, he checked again) changed on 'Open' and 'AES' TKIP, WPA (which is) and the password is correct, restart the router, moved the laptop around (the router was in my room, now it is in the thnxt room and it Me REPEAT JUST : 'Validation of identity' and 'impossible to find a certificate to connect to the network'.) I can connect with ethernet, but not with this new situation of the House, do I have the wireless. WHAT ME MISS? I did this for weeks and even now, it says I'm connected, the signal strength is very good, often great, but Explorer cannot display this webpage. Can someone tell me what to do? Thank you!  Allie

    Your old Toshiba equipped with an adapter wireless which is likely to be used for Wireless-a, b, wireless and wireless-g (the project).   Your employer has a newer version (not the last and larger, but much more recent than your equipment) router Linksys that is capable of wireless-b, wireless-g and wireless - n.

    Your most likely problem is that your employer has set up his router to "N-only.  Wireless n uses the same radio frequency as wireless-g (this is why detect you the "excellent" signal strength), but uses a different protocol (this is why you can't connect).

    Politely ask your employer to change the mode 'network' from the back of the default router of "mixed".

    The router manual is here: http://homesupport.cisco.com/en-us/support/routers/WRT160N see p. 13 ' Basic Wireless Settings.

    Looking for a certificate message was probably bound to have the box 802.11 x checked.  This box should NOT be checked for home wireless networks.

  • 15 - r074TU: laptop does not connect to the router

    Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

    I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

    Follow the wizards in the following forum sticky and troubleshooting.

    http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

  • Lexmark printer will not connect to the router

    Original title: HELP

    I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

    Hello

    Thanks for posting the question in the Microsoft Community!

    The Lexmark printer will not connect to the router/modem.

    Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

    You can try to get help on the site:

    http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

    If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

  • While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

    Computer problems and the router

    I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said that my computer does not have wireless capabilities. Any suggestions?

    You'll be much more likely to get useful (or even possible) suggestions if you provide the full text of the error messages you get, without paraphrasing.

    For example:

    He repeated to me that my computer is not connected to the router. --> What is the real error message?

    He also said that my computer lacks wireless capabilities--> what is the error message itself?

    You are "trying to connect via a cable" to the router or you're talking about your Internet service (for example, the router is connected to the Internet via a cable)?

    You think that your computer has "wireless capabilities?  Open the Device Manager (start > run > devmgmt.msc > OK), then click on the + sign next to "network adapters."  Please provide the names of any devices listed there.

    Is your computer without a name, a laptop?  There a name of brand anywhere (for example, Toshiba, HP, Dell, etc.)?

    Open System Properties (start > run > msinfo32 > OK)
    Click Edit > select all
    Click Edit > copy
    Right-click in your response here and select Paste
    Be sure to hide the "System name" or "User Name" if it makes you feel better, but please do not remove anything else.

  • There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

    There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
    I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
    I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

    original title: problem with the map?

    Hi GustavTak,

    1. you have made no changes to the computer before the broadcast took place?
    2. do you get an error message?

    Try the steps from the following link:

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Additional information:
    Network connection problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Set up a wireless router
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  • Satellite L350 - is not connect to the router

    I had a problem with the radio on my Satellite L350. Even if the router is right next to the computer, it is not for her. It can see if I do a search but only says: connection not available. I have 2 other computers works great on the router. The router is a Netgear.

    Any body can help?

    Hello

    What should I say now? First attempt to update the WLAN driver that you find on the Toshiba WLAN Portal:
    http://APS2.toshiba-tro.de/WLAN/

    Also, check the TCP/IP settings of the wireless network card. If your router supports DHCP, check if this option is enabled. Also make sure that the DHCP client and DNS work properly.

    You use a firewall? If so try turning it off. Maybe it s blocking of the Internet connection.

    By the way: what OS do you have?

  • Re: My Satellite C660 is connected to my router but did not have access to the internet

    Hello

    I have a Satellite C660 (Windows 7) that I've had for more than a year. I had no problem with the connection to the internet before, but last week I went online and had a small yellow triangle down, at the bottom right of my screen against the bar of connectivity. When I click to connect to my router, it says that it is connected with a signal excellent but says that I have no internet access.

    Can someone please?

    Have you tried to reboot your router?
    Please, do it and check if the problem still persists.

  • Re: Wireless not connect / search for router - Satellite P305

    Hey all, I hope that I can help.

    As I come back from uni, my laptop has decided that its wireless won't work. When I scan, it cannot find the router in my house and the icon in the taskbar has a cross inside. When I plug my laptop into the router via ethernet, it connects very well then and the wireless takes over even the router, but as soon as I unplug the wireless dies again.

    My laptop is a Toshiba P305 and has an Atheros AR9281 wireless card.
    My OS is Windows Vista Home Premium 32 bit SP1.

    I know that's not the router, since everything else connects fine - my PS3, this old PC XP (so I do this thread), etc.

    Sometimes when I start the laptop it finds my router (and a neighbor), but when I try to connect to it it says "Windows cannot connect to this network" and it simply disappears. Also sometimes I can connect to the router after that the Ethernet cable is disconnected, but it is limited to the connectivity (i.e. I can't get on the internet) and soon the tomb with the message "Windows has not received a response from the access point or router" and can not find yet

    What I've tried so far.

    -Restart.
    -Leave the portable island for awhile.
    -Switch wireless switch and turn it back on.
    -Check I have the latest drivers for the card.
    -Reinstall these drivers.
    -Check if the WLAN or other network services are disabled.
    -Restart some services.
    -Disabling and then re-enabling the adapter.
    -Physically sitting right next to the router and it still can't find it.
    -System restore
    -Disable the WEP encryption on my router and use another method of security, even turn off security completely.
    -Reboot the router.

    I have not had any problems with the wireless front, he has just started happening yesterday.

    Thanks for any help/advice, I'm out of ideas.

    Hello

    I see you didn't update the BIOS
    Well buddy, I think you should do this!
    Update the BIOS, and then try again

    If you notice more WLan connectivity issues then I would recommend changing the WiFi channel! This has been useful for me in the past!

    I know that you tried to update the driver WLan but check this Toshiba page for the latest version of the WLan driver!
    http://APS2.toshiba-tro.de/WLAN/

  • Other books disconnect WLan when the Satellite L300-BR connects

    Hello

    I have a strange problem that I am not able to connect to my router wirelessly using my laptop.
    I changed to a Netgear router and thought that the wireless device would be a problem but it has not been the case.

    When the Toshiba tries to connect, it disconnects my other machine.

    I have Vista Home Premium and it has been bundled with the laptop.

    The laptop has been fine since September and there were no new hardware changes etc.

    Any help or pointers will be appreciated.

    Thank you

    Tesh

    It's really strange, but you use DHCP on your router?
    These problems are caused only if you use the same computer and/or IP address.
    Here, you can compare these points.

    Make sure you have the latest firmware update for your router and disable all the security features for the tests.

    Sorry, but for the moment I put t have more ideas.

  • C850 satellite will not connect at 5 GHz WiFi

    My Satellite C850 found network 2.4 GHz Wireless and connected flawlessly. However, it is not 'see' the 5 GHz network, even if the router is in the same room and about 2 meters from the hotel. I have a problem, or in this laptop's wireless adapter will not connect to this speed? Any help appreciated, please

    Hello

    I think that the reason why your portable computer does not see the 5 GHz Wlan is simply.
    The wireless network card does not seem to bear the 5 GHz.
    The WLAN standard 802. 11A supports 5 GHz

    If the wireless network adapter supports 802.11 B / G and N or 802.11 G and N, then only 2.4 Ghz are supported.

  • Satellite L300 PSLB8E - connection WLan keeps falling

    Hi all

    Have gotten my Satellite L300 PSLB8E some 2 months ago and since the first day (RTL8187b) wireless is having serious problems.

    Continuous wireless connection drop if other phones that I use at home are very good.
    LAN on the same Satellite works fine as well, it's just wireless problem with this particular machine.

    I have tried to restore the system, using recovery discs, tried every possible update Toshiba as Realtek, but problem remains intact.

    Help, please!

    Mustafa

    Hello

    What version of BIOS you have on your laptop?

    There is a version v1.8 of BIOS on the European driver Toshiba page.
    Check if you have a lower version. If so update!

    In addition, I would recommend WLan driver download Realtek page:
    http://www.Realtek.com.tw/

    You can find the most recent driver.

    Last but not least that it would be a good idea to verify that the settings in the Panel-> WLan card properties-> Advanced tab.
    Here you can change the encryption, the channel and the power saving settings.
    I recommend turning off the energy-saving WLan card.

    You should also update the Vista of the State. I read that Vista has caused a lot of issues that have been fixed with the latest patches and fixes.

  • Satellite L300-217 - connection to the Bravia KDL - 40EX503 LCD TV

    Can someone tell me what cables I need to do the above, I am a complete novice regarding this sort of thing?

    Thank you.

    Hi jonboy899,

    I have the Satellite L300 and there only VGA output port. Right?
    Also, I checked the features of your Bravia TV. It has a VGA input port.

    This means that you can use a VGA cable to connect your laptop to the TV. These cables you can get everywhere, and they are not expensive.

    If you are connecting, turn off both devices and then connect the cable. Turn on your TV and select the input VGA port. Then turn on your laptop and using FN + F5, you can switch between monitors. :)

  • Satellite L300-1AQ connection to Toshiba Regza 37 '' LCD AV series 37AV505DB

    I think buying the Satellite L300-1AQ, how will I be able to connect to my Toshiba Regza 37 '' LCD?

    The LCD has no HDMI VGA port only 2, is a Toshiba laptop equipped with an HDMI port?
    What is the most cost-effective way on the connection of all laptops Toshiba to my LCD TV?

    Thanks for your help...

    Hello

    AFAIK the L300-1AQ supports only RGB (VGA port) port.
    This port provides only the analog signal and I doubt that you will be able to connect to the HDMI port because you cannot convert an analog signal into a digital signal.

    I put t know the other ports that is supported by the Toshiba Regza LCD 37 ", but I think that in this case, the HDMI port is not useful.

    Good bye

  • laptop older does not connect to new router

    Hello

    I have a laptop Compaq Presario A940NR which is several years old.  Until last week, it was connected through a router.  The router has stopped working on all devices (printer, 2 other laptops).  Replaced with a Netgear N150 router. -connected to a desktop computer, wireless to the printer and 2 new laptops.  Most old laptop listed above does not connect to the network.  I tried (wired) connection directly to the ISP modem via ethernet.  He does not even recognize this connection.  I may need a driver updated, but unable to connect to the internet on the laptop.

    Help! and thank you,

    Hi, Darlene:

    Here are more recent (MARCH 2011) a version of the driver for your Atheros wireless card. I suggest you use it since you have a new router. There was a lot of connection problems with your Atheros card and new Linksys E series routers, for example.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

    Paul

Maybe you are looking for

  • Re: Satellite C660D - 10L - Map WLAN there?

    Hello We are looking for a laptop using as a computer ThinClient-IGEL. For this reason, ist ist important to know the type of the WIFI chip. Thanks for the information. Karl-H. Brandt

  • How to remove smart pop - up shoppy

    In my view, there is an app I can install secure smart shoppy and avoid that it arise.  Can someone tell me what this app?

  • Audiophiles: iTunes equalizer in static, noise, distortion

    Hello Replaced a MBP 2012 with an iMac end of 2015 and the iTunes Equalizer now generate noise.  I have a very good desktop audio system and isolated the equalizer.  I use an external DAC is in the USB output.  All this experience?  Or to know if the

  • iPhone will not print to my eprint 6510 outside House

    xxxnest I have an iphone 3g and a hp photosmart 6510 e - all - in. I can't send a printing outside the House. I have wi - fi on and connected to my at & t internet provider.

  • ES3300 Version 8.2.2.5535 Add Filter Bug

    Tested with IE, Firefox and Chrome. When you try to add a new filter, we have found that the Type of attachment and the Code of the country allows no edition of the value of research field.