Any version of Airport running in Lion or later utility that will handle an Airport Extreme 2004?

Similar Questions

• "Bluetooth is not supported by any version of windows servers... what exactly does that mean?

  I am trying to set up a bluetooth connection between my mobile (Nokia X 6) and the new Acer lap top of page that is running windows 7.  In the past, when using Vista and my Samsung phone it was easy through "control panel."  With this new Windows7 however, it does seem to be an option to set up bluetooth.  There is however "help" a section ' how to set up bluetooth or other wireless connections, which begins by saying that you can transfer information via bluetooth and other wireless means, he then goes on to describe these "other" methods wireless, adding a note that "Bluetooth is is not supported by any version of windows server.  The lap top itself has a long side button Wi - Fi bluetooth button, which don't "turn on" or turn on when I press on it.  I'm not very technical interest and just use the computer for my music and photo organizing and other simple functions.  Apologies if it sounds ridiculous, but I think I'm getting conflicting information, is always available for use with windows bluetooth 7, if so does that mean say "he is not supported by windows servers?  I just want to know if I forget something really obvious or if I should stop trying altogether with all bluetooth and focuss on other file transfer methods?  All the advice in plain language or pointing me in the right direction will be so appreciated, thank you very much Frances

  Turn off the laptop and look at the bottom of this one.  If it doesn't have Bluetooth installed, there will be a white sticker with BLUETOOTH printed on it.

  You don't have an edition of Windows Server.  Those who would be Windows Server 2003, Windows Server 2003 R2, Windows Server 2008 and Windows Server 2008 R2 and a bit like Vista and Windows 7, they come in many varieties, Web, Standard, Enterprise, data and 32 and 64-bit editions.

  When you go into the Control Panel, you see an icon for Bluetooth?  Bluetooth does appear in Device Manager?

• Is it normal for my AirPort Extreme to run his fan on and off every 2 ' minutes throughout the day?

  I have a 2nd ae put in place to extend our network.  The second flashing yellow from time to time, always in the works, but the fan runs constantly II never heard our other use on the fan.  Never.

  If you ask about the current 'tour' in the form of version of AirPort Extreme, the fan runs constantly... (and normally very quietly)... as long as the AirPort Extreme has the power.

  This is the model you have?  If so, then the airport is defective. If the product is less than one year, or you have AppleCare implemented on one of your Macs... and... He airport most convenient is less than 3 years, Apple will replace the device for you.

  If your AirPort Extreme is not covered... and you are an it yourself type of person... you can open the AirPort Extreme and are looking for a replacement of the fan.  This article will give some tips on the opening of the product. Note that section provides the number of manufacturer and model of the fan, so you can use it to search for a replacement.

  AirPort Extreme A1521 teardown - iFixit

• Is there any version of Safari for Windows?

  I'm looking for any version of Safari run on Windows. Although I'm not, not when it is mentioned if Safari is only for iOS or if it will work on windows.

  Any guidance on this?

  Thank you

  Rafael

  Apple has continued to develop Safari for Windows a few years ago.

  Use another browser of your choice.

  Best.

• Questions about my old Airport Extreme & 5 vs. 2.4 GHz

  I have an older Airport Extreme.  It's either a generation first or second - model A1143 (two generations had the same number, can't say that I have).  But two of them said they sent either 2.4 GHz or 5 GHz - either / or, but not at the same time, (which came on the next generation).

  I have two questions: first, how can I tell who is sent to the and how are they passed?  And second, if my Airport is on the second floor, but most use is on the first floor, which of the two should I use?  I understand 2.4 is better for long distances, but did not know what is considered "long."

  Not only he use to my Macbook and iPads, but also to an Apple TV, where the bandwidth, of course, is a matter of concern.

  Thank you very much!

  Phil in Chicago

  I have two questions: first, how can I tell who is sent to the and how are they passed?  And second, if my Airport is on the second floor, but most use is on the first floor, which of the two should I use?

  Looks like three questions.

  Let's first find out which version of AirPort Extreme you have.  I assume that you are running a recent operating system on the MacBook like El Capitan, Yosemite, Mavericks, Mountain Lion, etc.

  Open AirPort Utility (Finder > Applications > utilities > AirPort Utility)

  Hold down the option on your MacBook while you double-click on the image of the AirPort Extreme

  Glance to see what model you have... An Airport Extreme 802.11n (1st generation), or an AirPort Extreme 802.11n (2nd generation)

  As soon as we have this info, we will you say a bit more on the model you have and how to check certain parameters of the airport you have.

  By default, the A1143 airports are set up to provide a network of 2. 4 GHz, so unless you have changed the settings, your airport is send signals of 2.4 GHz.

  5 GHz signals have the ability to speed faster than 2.4 GHz signals... but... 5 GHz signals are much weaker than the 2.4 GHz signals, 5 GHz works well when your wireless devices are in the same room as the Terminal AirPort, or they close a line-of-sight relationship with airport router.

  Not much of a 5 GHz signal it will be through a ceiling, which is on average about 3 times more dense as normal in a House wall, if you still want to use 2.4 GHz on your network.

• What is the mode of connection (ME918LL/A) current Airport Extreme support?

  I have a setup of the airport with two airports of previous generation connected in Bridge mode. (NOTE that this is not the same thing as a network via a wifi - connection Wi - Fi). I want to upgrade one of the units. I believe I read somewhere that the current model of (ME918LL/A) does not support bridge mode but can't find information about this in the specifications of the device.

  Bridge ME918LL/a mode?

  I believe I read somewhere that the current model of (ME918LL/A) does not support bridge mode but can't find information about this in the specifications of the device.

  Your feelings are what they are, but as any airport, Bridge Mode router is available as an option in router Mode for the 802.11ac current version of AirPort Extreme.

  Here is a screenshot of the ME911LL/A 802.11ac version of an Airport Extreme on the network here.

  

• The airPort Extreme (2007) and Time Machine

  Hi all

  I read the info "how to ask a good question" and apparently you need details. I'll try and be concise but informative with my problem. It has been a long journey to get to where I am, but hopefully, with a little help from this amazing community, I can get to my destination.

  Task

  To produce a backup solution Time Machine for the family spending as little money as possible and using the BRIC and broc, I already have.

  Equipment available

  I have a House with some ethernet cables for most rooms that through switches to allow a variety of, most entertainment devices to communicate. It is:

  1 x NAS/Media (ReadyNAS Duo v2) server,

  2 x TV (Samsung),

  2 x TEU (Beyonwiz),

  2 x Apple TV (a 2 nd generation the other is the latest version)

  2 x DVD players,

  1 x iMac.

  2 x 8-port switches,

  1 x 16 switch ports,

  1 x AirPort Extreme (2007).

  1 x Airport Express (age unknown but older than the extreme)

  1 x Fritz! Box 7490 Modem/Router

  Courses in place

  All the associated TV stuff are connected in 2 rooms through ethernet via switch 2 x 8 ports switch 16 central port and then to the Fritz! modem/router box.

  There are also all the usual WiFi going on with mobile phones, iPads and laptops.

  Remarkably, it seems just to work!

  However, I want to add some backup data on our computers. I tried to do by using the ReadyNAS as it is supposed to support Time Machine, but I can't it to appear as a backup destination. So, I thought, as I have AirPort Extreme, I add it to the network and attach a USB HDD for Time Machine since it is supposed to be easy. However, I've been home for hours and cannot make the HARD disk appear in system preferences/Time Machine.

  I plugged the Airport Extreme in one of the switches 8 port said to create a wireless network with the same details as the Fritz! The box according to another article of the support (Airport Extreme wired AND expand network - need of entry). Airport utility shows me Wi-wired connections and seems to work.

  I look at the AirPort Extreme disks tab and can see the attached USB drive here. However, it does not appear as a choice of drives available for backup in Time Machine preferences. I tried 2 different discs with the same result.

  The Question (finally)

  How can I get Time Machine preferences to show the USB disk attached to AirPort Extreme as a valid choice for backups? If anyone can give me a little help in the right direction, I would be very grateful.

  Thank you for reading this,

  Grant

  Unfortunately, the key here is that the version of AirPort Extreme you have does not officially support Time Machine backups on a drive to the USB port of the device.

  The only version of the AirPort Extreme, which will officially support Time Machine backups on a drive in the USB port on the airport is the 802.11ac current version that looks like a "tower". Older versions of 'flat and square' of the AirPort Extreme don't support Time machine with a USB drive attached.

  To check, please see "Time Machine in charge of USB drives" in this Apple support document... AirPort base stations: discs on USB - Support Apple

  Support for time Machine to USB drives

  OS X Time Machine supports compatible USB drives encrypted, related to the time Capsule (802.11n and 802.11ac) AirPort and AirPort Extreme (802.11ac).

  Given that the average life of most wireless routers lasts about 5 years, and your AirPort Extreme seems to be about 9, your AirPort Extreme did very well for you... much better than the average. It might be time to start thinking about a replacement who will be responsible for backups Time Machine... either a time Capsule (i.e. an AirPort Extreme with a built-in hard drive) or another AirPort Extreme.

• Exit Airport Extreme seems slow

  I have the latest version of Airport Extreme.  I completed a test of speed directly to my cable modem and it shows a download speed of 750MBps.  When my Airport Extreme is connected my typical speed is 30 Mbps (on my iPhone 6 + and in the same room as the router, the test is over).  I may have something misconfigured or connected incorrectly.  Anyone can shed some light on this subject?

  What is the brand and model of your cable modem?

• Is there a software update for Airport Extreme? Random disconnect

  Is there a software update for Airport Extreme? Random disconnection, have to keep unplugging it, done the hard reset, no change

  Is there a software update for Airport Extreme?

  No, if you ask for something 'new '.

  You don't specify what model of AirPort Extreme you have, but if it's the current 802.11ac 'tour'-shaped version, the last update of the firmware was well over a year. Make sure you have the version installed on the AirPort Extreme 7.7.3 .

  If you have an old 'flat' 802.11n or version "square" AirPort Extreme firmware update 7.6.4, who is 3 years and more.

  Please specify on the version you have on your AirPort Extreme.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• Can I buy any version of windows that runs on an old Compaq Tablet PC tc1100 DQ871A?

  Can I buy any version of windows that runs on an old Compaq Tablet PC tc1100 DQ871A?

  My Windows XP Tablet PC Edition swells with no disk to restore. The window of the software came with the computer, so I have a number of validation, but can't find the software.

  original title: old Compaq Tablet PC help!

  Hi MyrtleBeach,
   
  Contact the manufacturer for the disk as well as for any other aid.
  Visit the following link to contact:
  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-Compaq-slate/BD-p/BSC-274

• ACS any Version with Windows Server 2008 R2 64-bit domain controller

  Hi all

  Is there any version of ACS is currently working with Windows Server 2008 R2 domain controllers?

  Our server controls has recently upgraded domain controllers to 2008r2 and off 2003 servers. This did not our ACS 4.1.4 really happy.

  I read now serveral messages about problems with the ACS and Server 2008r2 and hope to find a solution (not to mention that switching to LDAP, yukk).

  Thank you

  Pato

  ACS currently cannot be installed on a server running Windows 2008 R2.

  As an alternative, you can install ACS on a member server.  Authentication

  ACS uses the local machine net API authentication both compared to a 2008

  R2 domain will work.  The Remote Agent can also be installed on a 2008 R2

  Server if you use devices.

  If you install ACS on a member instead server here is how to configure services

  to authenticate properly with the domain:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/installation/guide/Windows/postin.html#wp1041304

  -Jesse

• I can't click on any buttons of menu in any version of Flash CC.

  I can't click on any buttons of menu in any version of Flash CC. I'm in 2 versions, work place which is fine and a home that doesn't work. For example I click on files and export and the buttons do not work. This seems to be a problem of Flash CC not Flash C6.

  I work remotely, and I have a fairly new PC running windows 7. Intel CPU with 3.5 GHZ, 16 GB of ram. on a TB of ram, NVIDIA Quad K2200 graphics card.

  Thank you.

  Under the resolution, I changed the text of 150% and 125% setting and now everything is fine. Thank you.

• Impossible to get any Script Batch to run

  Hello together,

  First, thank you for this community.

  It s a shame, I can´t get any Batch script to run.

  For example a PDF file do lot with a selection of folder.

  I always alert, no matching file found.

  I use cs 5 on 5 with osx 10.8.2 g

  Here is the script... it shouldn't be a big thing!

  why no file does not fit into the "mask"?

  Here is the script

  /**********************************************************

  ADOBE SYSTEMS INCORPORATED

  Copyright 2005 - 2006 Adobe Systems Incorporated

  All rights reserved

  NOTE: Adobe permits you to use, modify, and

  distribute this file under the terms

  the license agreement Adobe accompanying him.

  If you received this file from a source

  other than Adobe, then your use, modification,

  or distribution of it requires obtaining

  written permission from Adobe.

  *********************************************************/

  /**********************************************************

  Export to PDFs.jsx

  DESCRIPTION

  This example gets the files specified by the user of the

  batch and selected folder treats and records

  in PDF format.

  Changes by Patrick Mineault:

  -Only the processed .ai files

  -the files saved in the same folder as the input files

  -export files have names (oldname) _export.pdf

  -Settings PDF: unchangeable / acrobatLayers = false

  for maximum compatibility with preview

  **********************************************************/

  Main code [the script starts here]

  Uncomment to delete the Illustrator warning dialog boxes

  app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;

  var destFolder sourceFolder, files, type sourceDoc file, targetFile, pdfSaveOpts;

  Select the source folder.

  sourceFolder = Folder.selectDialog ("choose the folder with Illustrator .ai files you want to convert to PDF ');

  If a valid file is selected

  If (sourceFolder! = null)

  {

  files = new Array();

  fileType = "* .ai; Guest ("select the type of Illustrator files you want to process.") For example: * .ai ',' ');

  Download all the files that match the pattern

  files = sourceFolder.getFiles (file type);

  If (files.length > 0)

  {

  Get the destination to save files

  destFolder = Folder.selectDialog ('Select the folder where you want to save the converted PDF files.', ' ~');

  destFolder = sourceFolder;

  for (i = 0; i < files.length; i ++)

  {

  sourceDoc = app.open (files [i]); Returns the document object

  Call the getNewName function to get the name and the file to save the pdf file

  targetFile = getNewName();

  GetPDFOptions function call to get the files PDFSaveOptions

  pdfSaveOpts = getPDFOptions ();

  Save as pdf

  sourceDoc.saveAs (targetFile, pdfSaveOpts);

  sourceDoc.close ();

  }

  Alert ("the files are saved in PDF format in" + destFolder);

  }

  on the other

  {

  Alert ("no file found");

  }

  }

  /*********************************************************

  getNewName: function to get the new file name. Primary school

  name is the same as the source file.

  **********************************************************/

  function getNewName()

  {

  var ext docName, newName, saveInFile, Nomdoc;

  docName = sourceDoc.name;

  ext = "_export.pdf"; new extension for PDF

  newName = "";

  for (var i = 0; docName [i]! = '. '; i ++)

  {

  newName += docName [i];

  }

  newName += ext; complete in PDF file name

  Create a file object to save the pdf file

  saveInFile = new file (destFolder + ' / ' + NewName);

  Return saveInFile;

  }

  /*********************************************************

  getPDFOptions: function to set the PDF save options of the

  files using the PDFSaveOptions object.

  **********************************************************/

  function getPDFOptions()

  {

  Create the PDFSaveOptions object to set the PDF options

  var pdfSaveOpts = new PDFSaveOptions();

  Definition of the PDFSaveOptions properties. Please see the JavaScript reference

  for a description of these properties.

  Add more properties here if you wish

  pdfSaveOpts.acrobatLayers = false;

  pdfSaveOpts.colorBars = false;

  pdfSaveOpts.colorCompression = CompressionQuality.AUTOMATICJPEGHIGH;

  pdfSaveOpts.compressArt = true; by default

  pdfSaveOpts.embedICCProfile = true;

  pdfSaveOpts.enablePlainText = true;

  pdfSaveOpts.generateThumbnails = true; by default

  pdfSaveOpts.optimization = true;

  pdfSaveOpts.pageInformation = false;

  pdfSaveOpts.preserveEditability = false;

  Return pdfSaveOpts;

  }

  My problem is really so stupid?

  He works only in cs 3?

  I noticed that you put in the comment line to select the file type. What happens if you return to the original version that works?

• Unable to download any version of Adobe Reader

  Hi, hope you can help. I can't get any version of Adobe Reader to download. After spending hours trying every way all I get is the same error message "installation error" then ' the patch package could not be opened. Verify that the patch package exists and that you can access '? I am quite at a loss, and I am desperate to get my course work flow as some has been converted to pdf. My system is Windows XP - SP3. Thank you very much... certainly a model IT.

  Try to download the offline installer of

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

  Where you previously had other versions of reader on your computer, it may be a good idea to remove them all before you do the above. You can use this tool:

  http://labs.Adobe.com/downloads/acrobatcleaner.html