App froze during the update on my iPad and I can't even delete the app.
- I had an application that has been updated and it froze. It is blacked out with the lyrics on hold. I tried to delete the app, but it won't let me.
Force reboot your iPad.
Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.
Then try to update this app.
Tags: iPad
Similar Questions
-
iPad froze during the update and may not exceed
Has obtained the new ipad and put in place. Went do the last software update and it froze during the update process. Blocked at the white screen with the apple logo. Can not pass it and past 2 hours. Tried to restore through itunes, but get the error that I need to enter my password which I can't because I'm stuck on the white screen.
Hey there smbirchler,
Congratulations on your new iPad! Looks like you were updating the iOS version, the device froze, and now you can't pass the white Apple logo screen, even after you try to restore in iTunes. I know how happy I am when I get a new camera, so we'll work together on that, so you are able to enjoy your iPad mini.
We will have you try to use the device in Recovery Mode. Take a look at this article for how to do this:
If you are unable to update or restore your iPhone, iPad or iPod touch
Thanks for being a part of the communities of Apple Support!
-
Creative desktop cloud application froze during the update. Updated fine PSCC but LRCC froze before it has been updated. What should I do now? Chat is closed. ON the home screen of the creative cloud desktop application it usually shows my activity - but now it says nothing except "your hoome stream is empty. Should I download new creative cloud app - it's corrupted?
Hi Carol,.
Please follow the steps below:
(1) uninstall Adobe CC (use of the Adobe Creative Cloud cleaning tool to solve installation problems)
(2) restart machine
(3) install the application Adobe CC since the help document: use of the desktop application cloud creative to manage your applications and services
Kind regards
Sheena
-
My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.
This general situation may be similar to what is mentioned in this sequel to thread of the CSA
and if the remedy is to use instructions; detailed and I hope they are correct...
Re: Restart fails after installation of El Capitan help!
Or you can try and see on the repair of the system and then if your disk utility can
See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to
the Mac system, to see if this solves the problem. There may be more than one cause.
You could try and boot into OS X Recovery, utilities out there, and other options are available.
• OS X: on OS X Recovery - Apple Support
This example uses a special partition on the hard drive of recovery which is not in the
same disc that the Mac OS X section; However if your hard drive is missing, these other
items may also be at risk. You must have and maintain backups of your duplicate content
on the external storage drives closed; In addition, a Time Machine backup helps to restore.
• Apple OS X and Time Machine tips:
http://pondini.org/OSX/home.html
• Tips for OS X - using HD recovery:
http://pondini.org/OSX/RecoveryHD.html
{Using the utility disc and other tools can be done from the boot OS X Recovery volume
Beware of the fact these tools can also delete or reformat your content; wiping.}
Don't know what to say; you could see visiting an Apple store with genius if
There is an official store. Usually for best time planning you would contact them for an appointment.
- Make an appointment at an Apple Retail Store Genius Bar
- Find an Apple authorized service provider
- https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)
Or if there is no official retail Apple Store with genius, the following suggestion would be to contact
a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.
In any case...
Good luck & happy computing!
-
E5-571 news froze during the update of windows
Hi, my 5 E5-571 days old froze during windows update last night, left on the screen to update from one day to the next, had not changed by the morning, had to close it using the manual key, lit a few hours later, still stuck on the same screen to update, but no progress on the update.
Call the customer support service, informed it was due to an accumulation of static electricity, said to unplug the power cable, press and hold the button to exhaust excess electricity, then plug in and turn on with a press of the button as usual.
Computer worked after that.
I was wondering if this sounds an alarm for other Acer users? Has anyone else had the same problem, and it is called a recurring problem? Is this a known in the community of acer solution (unplug and press the start button to get rid of static correction)?
Would be happy to hear the answers!
Yes, I know difficult.
nothing to worry too much.
-
Vista froze during the update. Can I stop?
Hi all.
I tried to update my friend with Vista Service Pack 1 computer, but it froze during the update. I tried to cancel the download task manager and restarting, but it is now fixed on the 'day of the installation. Do not unplug or turn off your computer"screen. It made no progress. Can you force shut down the computer?
Thank you
AngelaHello
give him a little more time
If it continues like that and you must stop and restart problems, try the following steps to solve this:
1st thing to try would be a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
-
BlackBerry smartphones HELP! Torch 9810 froze during the update
Help please.
My blackberry froze during the backup process in the software update.
It is taped to 19% for the last 2.5 hours.
Please someone help!
Thank you!
He finally finished loading after 10 grueling hours!
-
App version 32 crashes on an automatic update on some iPads and not others
Hey guys,.
Can they relate my iPad app crashes when the automatic update for some iPads and not others? Don't know how to correct the problem. Any ideas?
When you rebuild your v32 app and when you submitted it to Apple? Apps should be built after September 13. See http://status.adobedps.com/?p=732.
Also, what do you mean by "Automatic update"?
Neil
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?
10.10 is no longer available unless you had previously downloaded. In this case, it would be in the purchase of the Mac App Store section. Its not available for direct plus download.
You can directly update 10.11 El Capitan.
-
My computer turns off during an update to windows xp and now windows xp will not load.
My computer turns off during an update to windows xp and now windows xp will not load. It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options. I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive. I have the product key, but I don't know where or how repair the operating system.
Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.
-
can you help to reset the iPhone 6 +? used of the year and the month. Now, when you update, it asks activation and I can't remember anything! Arouca and verification is in stock
To activate you need your Apple ID and password. If you forgot their date on https://iforgot.apple.com.
-
I updated iOs 9.3 and I can't activate my Iphone. A message informs you that the server is not available
Have same problem here too.
I have iPhone 5 and update iOS 9.3 and I can't activate my Iphone. A message informs you that the server is not available
-
I had to update my windows computer and you can no longer open Photoshop cs2. trying to find help with this new system is not easy to use to put it kindly. I downloaded the program and don't have the available key. I tried to sign in but where.
For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.
As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.
The serial number is to the right of the download link for Windows. You'll need this one, not your old number.
Get them here: download Acrobat 7 and CS2 products
-
I installed an oem of windows 7 in two from one office to another laptop but today I update my desktop pc and I can't activated
INSTALLATION AND USE RIGHTS.
a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.
b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.
c. number of users. Except as provided in these license terms, only one user may use the software at a time.
d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.
You will need to purchase an additional license.
Maybe you are looking for
-
Why the Satellite Pro A120 fails to bootload?
I am trying to unravel Pro A120, a friend he will not run the boot load sequence. everything looks OK in the BIOS: recognized HARD (SATA) and CD-ROM (IDE) disk. System check is OK. I tried to start the CD-ROM and HARD disk by sequencing to boot in th
-
LabVIEW and Perforce branching
Hello I want to use Perforce branching with LabVIEW development capabilities. It seems quite difficult (if possible). Anyone have experience on this feature? with thanks a lot Philippe
-
Xbox live error: my account is associated with a different profile
I made a new xbox account and put in my Gamertag and when I created there and he has tried to sign up to xbox live, it tells me that my account is associated with a different profile. What should I do Original title: Xbox Live
-
Restore the default size of the symbol
HelloIs it possible, after changing the size of an instance of a symbol, to restore its original size (the default size of the symbol)?This is for CS4.Thank you.
-
How can I download acrobat pro xi
How do I