Application and transport layer connection problems

Similar Questions

• Windows Vista Media Extender and xbox 360 connection problem

  I get the following error message when you try to connect my xbox 360 to my PC to vista through the Windows Media Center extension
  Connection complete

  The Xbox 360 has been disconnected because an application has launched unexpectedly UI. You want to reconnect?

  I followed all the steps of your forums that are supposed to resolve these issues, but he continues to be. What can I do to fix this?

  Hi Snufferum,

  Thanks for posting on answers.com.

  First, disable the program anti-virus or firewall that runs on your computer and check if the problem persists.

  Note: because some anti-virus software will cause conflicts between unexpected applications, please temporarily disable any antivirus, firewall or anti-spam on your computer programs.

  This problem occurs if the floating language bar is enabled on the Windows Vista-based Media Center computer. This configuration closes the connection between the Media Center Extender and the Media Center PC.

  To resolve this problem, change the settings of the Media Center Extender language bar. To do this, follow these steps.

  Step 1: Configuring settings on the Windows Vista - based Media Center computer

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards .
  3. On the Language bar tab, click docked in the taskbar under options from the language bar .
  4. Click OK .
  5. On the administration tab, click copy to reserved accounts .

  If you are prompted for an administrator password or for confirmation, type the password, or click continue .

  1. Click on the checkbox by default (new users) user account , and then click OK twice.
  2. Click Start and then click Windows Media Center .
  3. Click tasks , and then click settings .
  4. Click Extender , and then on the Xbox 360.
  5. Click Uninstall , and then close Windows Media Center.

  Step 2: Configuring the settings of the Xbox 360 console

  1. In the System of the Xbox interface section, select computers .
  2. Select Windows Media Center , and then press the A button.
  3. Select Disconnect .
  4. Press the B button repeatedly until you return to the System section.
  5. In the media of the Xbox interface section, select Media Center .
  6. Advance in the instructions on the screen to get the 8-digit setup key.
  7. Note the setup button.

  Step 3: Configuring the settings on the Windows Vista - based Media Center computer

  1. Click Start and then click Windows Media Center .
  2. Click tasks , and then click add extender .
  3. Click Next and enter the 8-digit setup key you obtained media of the Xbox interface section.
  4. Follow the prompts to complete setup of Windows Media Extender.

  When you copy these settings for reserve accounts in the 1st step, you change the settings of language bar for all new users that are created on the Media Center computer. After you add the Windows Media Extender, you can reverse these changes so that all new users will have a floating language bar. To do this, follow these steps on the Windows Vista-based Media Center computer:

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards .
  3. On the Language bar tab, click floating on the desktop under the language bar options .
  4. Click OK .
  5. On the administration tab, click copy to reserved accounts .

  If you are prompted for an administrator password or for confirmation, type the password, or click continue .

  1. Click on the checkbox by default (new users) user account , and then click OK twice.

  You can go through the article below:
  http://support.Microsoft.com/kb/934542

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Setup error".

  http://support.Microsoft.com/kb/932342

  This article should help you work on problems you encounter while trying to connect to the Xbox 360 and Windows Vista.

  Connect your Xbox 360 to Windows Media Center

  http://www.Microsoft.com/Windows/products/winfamily/mediacenter/Xbox360.mspx

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop (HP ZV6000) and WRT160N plu connection problems

  I recently got a new HP Touchsmart 600 and set up with a Linksys WRT160Nv2 router. The Touchsmart works fine, no problem, and is so the Dell Latitude D630 I use for work.

  However, for some reason, I can't get on the internet through our other computer, which is an older HP Pavilion ZV6000.

  I implemented the Broadcom Wireless software that came with the computer and it says that it is "connected" to the router wireless... but when I open Internet Explorer, it says 'cannot connect to the Internet'... and immediately goes to work offline.

  I used to have the laptop HP connected to a Linksys WRT54GS wireless router and never had any problems (or, at least, nothing that I couldn't solve).

  Is there some kind of conflict between the WRT160N and the HP Mini PCI Broadcom 802. 11B / G wireless LAN Card?

  You have the static IP address on the HP laptop.

  Do the automatic IP address settings wireless network connection and see if you are able to access the Internet.

• Applications and updates Windows installation problems

  Original title: using windows vista Installer problems and having

  nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

  Hi DaroldMILLER,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What applications/programs you install?

  ·         You install updates?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Problem installing programs and applications:

  Method 1: Follow the steps in the article.

  How to solve problems when you install or uninstall programs on a Windows computer

  Troubleshoot installing or uninstalling programs

   

  Problem installing Windows updates:

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• application forms client side connection problem-oracle 11g Server

  I installed the application oracle 11 g 2 on windows 2008r2 server. Installation of Weblogic. All installations were successful. But when the URL for forms running it prompts for the name of user and password and identification of database information. The application seems to be frozen and we have to refresh and again in the authentication credentials several times to get the application connected to... Please give me a solution for this.

  (Version of Java on the client 1.6.0.25 Client os xp/win7/32/64bits version)

  Tried the solutions are (but failed to solve the problem)

  1. change the browser and the version of the browser.

  2. change the java version.

  3. in the paper of the forms it says error fatal client-side...

  [2013 09-17 T 10: 53:52.073 - 07:00] [WLS_FORMS] [ERROR] [FRM-91230] [oracle. . forms servlet] [tid: 11] [username: < anonymous >] [ecid: 0000K4h3dF95qYWFLzQLOA1IE4TU00009y, 0] [SRC_CLASS: oracle. . forms servlet. ] [RunformProcess] [APP: formsapp #11. 1.2] [SRC_METHOD: fromFrmwebToODL] fatal to the RUNNING process error: timeout on the connection to the Java client]

  Hello, I am writing to inform you all to say that I found the solution. In any case, I saw there were some messages saying to change the version of Java on the client side I made, but did not work. But the solution I've found is as explained below.

  There are some parameters in the Java on your computer to be modified in order to use it.

  • Go to the control panel.
  • Select Java.
  • After the control panel opening Java go to move the tag.
  • Disable the Java plug-in to uncheck 'enable the plugin from new generation... '. ' as shown below
  • Apply the changes and restart the browser.
  • URL will work.
  • Recommended for this IE browser

  Post edited by: LasheenMihik

• Logitech webcam M/N VUBE-43is in use by another application and I cannot connect to it

  I have a webcam logitech M/N VUBE-43, I used it on this computer gateway DX441S with windows vista family premium, but now I cannot CONNECT to THE CAMERA.

  The error MESSAGE IS: WEBCAM IS in USE BY ANOTHER APPLICATION! ANOTHER APPLICATION OF WINDOWS VISTA COULD INDICATE TO THIS MESSAGE, AND HOW DO I REMOVE THE BLOCK! Thank you

  Hello the South Georgia Farmer,

  If you go into the Task Manager you see all processes running that could be using the webcam, like MSN messenger or Skype? If so, then finish the process for MSN and then see if you can use your Webcam. Also other programs that may be using the Webcam can have left handles opened to the webcam.

  I check and update the webcam in Device Manager.
  -Control Panel > System Maintenance > Device Manager
  -Go to Imaging and made devices 'Logitech Camera' right click and choose "update driver software".
  -Click on "automatically search for an updated driver.
  S ' it automatically finds none, then choose 'Browse my computer for driver software' and
  "Let me pick from a list." Find your webcam version and update.
  -Restart your computer.

  Now check and see if you still get the error. If so, my next recommendation would be to contact Logitech for help.

  Please answer back with an update on this issue.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Wireless and wired Internection connection problems

  Hello community,

  My first question concerns my wireless laptop connection (or lack of it). I rebooted my router (because I forgot my password), who restored the device to factory default settings.  When I've reconfigured the router, I was unable to connect to the Internet via a wireless connection. When I troubleshoot with Windows 7, it says that I need to connect an Ethernet cable from the router to the laptop.  However, it was not necessary when the connection to the local area network (LAN) via a public network worked without error.  In addition, when I check my wireless network connection, it shows that the signal strength is excellent and a connection is attempted, but without success.  When I open the network and sharing Center, there is no LAN.  Is it possible that something is blocking access to the LAN? It wasn't a problem, before I changed the router username and password the default user and password. Something is flooded with this situation.

  A second problem occurred when I tried to connect my desktop computer directly to the external modem from my ISP in which I work around the router. There is no Internet connection when this happened.  Before configuring the router via wireless connectivity, the direct connection between the external model of my ISP and my office worked without error. Your thoughts on these two issues are very popular.

  Thank you in advance.

  We're going to do in the first place the wireless and see if we can make it work.

  Go to the router configuration page (it can be www.routerlogin.com or an IP address, depending on your brand.) See your documentation for him.). Under "wireless" parameters must be a place to enter the password you will need to know to access the router. If it is always the default value (which will be probably if reset you factory default), then change to something unique.

  Open the network and sharing Center and click on 'Manage wireless networks' in the left column. Right click on your wireless connection and on the Security tab, select the settings of your router is to (WPA, WPA-2, etc.) and the type of encryption. Then enter the password that you put in the router in the box "network security key. On the connection tab, uncheck "automatically connect...". "for the time being. OK, and then restart. Check if your wireless network is working now.

  To connect to the modem, you may need to recover from the IP. Open a command window, type ipconfig/release and press ENTER. When that finished, type ipconfig / renew and press ENTER. Now you should be able to connect directly through the modem.

  Thing, that I forgot to mention, while you are in the configuration of your router, make sure that "Enable SSID Broadcast" (or a similar expression) is checked.

  SC Tom

• Hi, I'm trying to install the old version of Illustrator CS6 of Creative Cloud application. The application will not even start the download and the process stops at 0%. I tried other applications, and there is no problem. Help, please. Thank you.

  DF

  Here are the links to directly download the installers CS6 (no Manager or assistant)
  Download Adobe CS6 Trials: Direct links (without Assistant or Manager) | ProDesignTools

  Be sure to follow the steps on this page to avoid seeing errors.

• I have century link hi speed and everytime I turn on my computer it says unable to connect internet connection problem

  I have a hp laptop laptop new g4-1229dx and I have century link for my provider it maintains to disconnect myself from the internet need could be the problem

  Hello Terry,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are facing a problem when the network connection with century link hi speed.

  It would be awesome if you could answers to these questions in order to help you further.

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• My laptop is one of the 4 home cannot connect to the internet, it's Vista and it has connected w/Ethernet no problem, I called Xfinity tech, that says, is the problem of configuration! Can you help me?

  Acer laptop, Vista is, she can connect wirelessly with my friend modem but my house, she can't, I use the service of Comcast, they checked the modem is fine, they think that the problem of configuration! I'm not computer too, thank you!

  Ryan (Shih Chi)

  Hello

  How do you try to connect the computer to the House? Wired
  or wireless?
  Try the methods provided and see if it helps to solve the problem.
  Method 1:
  Check out the link and follow the troubleshooting steps in the article.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  If you try to connect to t Wireless net work then refer to this link and follow the steps.
  Connect to a network with Windows Vista wireless
  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx
   
  Method 3:
  Reset TCP/IP on your computer and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
   
  Method 4:
  You can also visit this link and follow the steps.
  
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Error message: "unable to connect to the RPC Server" and no internet connection.

  Original title: recently installed a program of pc cleaner. Seemed to really speed up my laptop that is running Windows XP.

  After two days I try to connect to the internet and no connection lie. Uninstalled the pc cleaner without problem but the problem continues to exist. All tests, etc., result in "unable to connect to the RPC server. Slide short drive and reinstall XP, are there any other things to try?

  Hi Wantamustang,

  You can try the following steps and check.

  You can set the remote procedure (RPC) call Service to start automatically:

  a. clickStart, point to settings, clickControl Paneland then double-clickServices.

  b. in theservices list, click the remote procedure (RPC) call Serviceand then clickStartup.

  c. underStartup Type, click Automaticand then click OK.

  d. restart your computer.

  You can also consult the following article:

  Windows wireless and wired network connection problems

• I can't access the internet. Diagnostic says I have problem winsock. Windows XP could not fix the connectivity problem.

  For windows XP Network Diagnostics says I have a problem with the Winsock provider catalog.

  Hello

  1. don't you make changes to your computer, after which the issue started?

  ID is recommended to run the program "Fixit" of this article or / and follow the steps manually and check if the problem persists.

  http://support.Microsoft.com/kb/811259

  See also:
  Windows wireless and wired network connection problems

• Wireless connection problems

  my laptop is suddenly wireless LG disappeared from my system, I can not connect to enternet without cable, what do I do?

  missing a piece on the right under the angle of my laptop, I discovered it recently and the WiFi disappered recently too, did play a role?

  Hello

  1. do you get an error message? If Yes, what is the full and exact error message?

  2. What is the number of the model of the computer?

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to update the network drivers and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For any hardware related questions, I suggest you contact the manufacturer to better support that we do not know what piece of hardware you're talking about.

  If the problem is not resolved, please respond with more information, and we will be happy to help you.

  Thank you.

• Help! I have Windows Vista and my internet connection goes out a lot!

  I know that this is not my fault for routers because nobody else has this problem and my xbox internet never goes out! Help, please! What is my drivers? Or what you please, you can add me on Skype - xEntertainable

  Hello

  1. is it wired or wireless?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows