Application error - igfxtraywindow:igfxtray.exe.

Similar Questions

• I get this pop up when I log into Yahoo. Application error - Tooltip:YahooMessenger.exe - CLayoutEngine

  This happens when I log into Yahoo. Pop - up indicating: Application error - Tooltip:YahooMessenger.exe - CLayoutEngine.  The instruction at 0x7c9116f4 reference memory

  to 0x0123f3ca. the memory could not be written.  Click on ok to terminate the program. What causes this? Please help.thanks

  Hello

  I suggest you to uninstall and reinstall the software of Yahoo messenger.

  See: http://help.yahoo.com/kb/index?locale=en_US&y=PROD_MSNG&page=content&id=SLN1425

• application error - ALCXMNTR. EXE

  How can I fix this application error - ALCXMNTR. EXE?  It appears on my screen at the beginning upward.

  The file belongs to Realtek AC97 Audio drivers. There is no reason to make it run at startup, because it does not affect your sound. Use the System Configuration utility to remove the call to this program at startup:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• How to fix application error - IWMSWindow: S24EvMon.exe

  Application error appears whenever I start my laptop Win XP Pro SP3 when the logon dialog box appears. The error is "the exception unknown software exception (0xc0000409) occurred in the application at location 0x0044a920", I have to click 'OK' or 'Cancel' to continue.

  SamuaiUFS

  S24evmon.exe is a file related to Intel wireless network cards.

  You have an Intel wireless network card in your PC?

  in the affirmative, it works correctly?

  If this is not the case, try to remove the device driver and reinstall the latest version, you can find on the Support Web site you PC from the manufacturer.

• Application error: CreativeCloudSet - Up.exe

  Hoe kan ik said oplossen

  Logboeknaam: Application

  Bron: Application error

  Reference: 16/05/2015-11:19:07

  Gebeurtenis-id: 1000

  Taakcategorie: (100)

  Level: who cares

  Trefwoorden: Klassiek

  Gebruiker: Derby

  Computer: Gebruiker-PC

  Description:

  Naam van toepassing met doing: CreativeCloudSet - Up.exe, versie: 3.0.1.87, tijdstempel: 0x554881ef

  Naam van module met doing: AdobePIM.dll, versie: 3.0.0.74, tijdstempel: 0x5535050f

  Uitzonderingscode: 0xc0000005

  Foutoffset: 0x00013fa7

  Trial ID van met with care: 0x10ac

  Starttijd van toepassing met doing: 0x01d08fb92d29e704

  Met toepassing naar cushion care: C:\Users\Gebruiker\Downloads\CreativeCloudSet-Up.exe

  PAD naar module met doing: C:\Users\GEBRUI~1\AppData\Local\Temp\{1DB09524-E212-4FAA-8AB8-798A3D86608D}\CCLBS\PDIM\Ad obePIM.dll

  Report id: 99f16d11-fbac-11e4-8758-001999cc5931

  Gebeurtenis-XML:

  " < event xmlns =" http://schemas.Microsoft.com/win/2004/08/events/event "> "

  <>System

  < name of the provider = 'Error of Application' / >

  < qualifiers EventID = '0' > 1000 < / EventID >

  < niv.2 > < / level >

  < task > 100 < / task >

  < Keywords > 0 x 80000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2015-05 - 16 T 09: 19:07.000000000Z "/ >"

  < EventRecordID > 131764 < / EventRecordID >

  Application of < channel > < / Channel >

  XXX < computer > < / computer >

  < security / >

  < / system >

  < EventData >

  < data > CreativeCloudSet - Up.exe < / data >

  < data > 3.0.1.87 < / data >

  < data > 554881ef < / data >

  < Data > AdobePIM.dll < / data >

  < data > 3.0.0.74 < / data >

  < data > 5535050f < / data >

  c0000005 < data > < / data >

  < data > 00013fa7 < / data >

  10ac < data > < / data >

  < data > 01d08fb92d29e704 < / data >

  < Data > C:\Users\xxxx\Downloads\CreativeCloudSet-Up.exe < / data >

  < data > C:\Users\xxx\AppData\Local\Temp\{1DB09524-E212-4FAA-8AB8-798A3D86608D}\CCLBS\PDIM\A dobePIM.dll < / data >

  < data > 99f16d11-FBAC-11e4-8758-001999cc5931 < / data >

  < / EventData >

  < / event >

  Step 1

  Open Control Panel and go to control Panel\Programs\Programs and features.

  In the list of programs and features, locate Adobe Creative Cloud and uninstall the same.  [[ only if it exists] just in case where as partial installation]

  ------------------------------------------------------------------------------------------ ---------------------

  Step 2

  Open the c: drive and navigate to C:\Program Files (x 86) \ " Common Files" \Adobe.

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  ------------------------------------------------------------------------------------------ ---------------------

  Step 3

  Navigate to C:\Program Files (x 86) \Adobe.

  Open the Adobe folder and if necessary remove Adobe Creative Cloud folder. [* important]

  ------------------------------------------------------------------------------------------ -----------------------

  Step 4

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Note: This time, let's try with Adobe Application Manager. It should solve the problem.

  
  

  "Click on the link below and download Adobe Application Manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Once the installation is finished, it will create the shortcut on the desktop.

  Double-click it, it will be updated to creative cloud.

  Then try signing in.

• application error plugin - container.exe SW to the closing of Firefox

  The message is - the instruction at "0x0158609c" referenced memory at "0 x 00000014. The memory could not be "read". Click on OK to terminate the program.

  The problem has not occurred with Firefox 9, thanks Daniel for your help.

• winver.exe error, error code "winver.exe 0xc0000005 application error".

  Title original: winver.exe error

  I had this problem "application error 0xc0000005 winver.exe".

  someone knows how to fix this?

  Hi Helel,

  1. When you get this error message?

  2 have you made changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode and check if the problem persists or not.

  A description of the options to start in Windows XP Mode

  Step 2: If the issue is not reapper in safe mode, perform a clean boot, and then check that it helps if you can skip this method.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Run the System File Checker scan and check if it helps.

  File system (CFS) Checker

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• Application error: vmsnap23.exe

  Hello, all.

  This is my first post on this forum, so please be nice!

  Last month, I have an application error that occurs whenever I connect. It seems that the vmsnap23.exe application fails to start, but I don't know what it is (* or * else) so that I can fix it. Any ideas?

  I'm on XP (sp3 since yesterday)

  The event viewer shows this information:

  + Faulting application vmsnap23.exe, version 0.0.0.0, module failed ntdll.dll, version 5.1.2600.5512, address failure 0 x 00011669. +

  I have followed the Microsoft but have not found something useful here. The program is slightly on the C: and not in "program files", or one of the system folders.

  It is a program of Toshiba, part of XP * or * something questionable I can simply delete?

  Thanks for the research.

  See you soon!

  Ken

  Reading a few other forums I found an interesting comment on VMsnap23.exe. Supposedly this process belongs to McAfee VirusScan. McAfee is installed on your laptop?

• application error Userinit.exe & rundll32

  I don't know if anyone has any help on this would be greatly appreciated.

  I am Windows Windows XP Home SP2 on a Satellite edition.
  I think I have a virus that prevents me to connect to my computer properly. Whenever I connect to my computer, it shows the desktop, but nothing else. He then says "userinit.exe application error 0xc00000005 application failed to initialize properly."

  I have to use the Task Manager to find the office. I then give me rundll32 errors with the same error as stated above code. The rundll32 error prevents me from doing anything administrative, so I can not turn off the system restore, I could save a copy of the virus.

  I ran superantispyware and it seems to keep finding the same virus without getting rid of them.
  I really want to do a repair install, I can't find my cd.

  In my opinion these two files are not affected by viruses.
  Maybe your superAntiSpyware it cannot recognize as common system files.

  To ensure that your system is not affected by a virus, you should try to use multiple VRU and spy ware applications;
  I use the software called Antivir. The standard version can be downloaded for free from various Web sites. I recommend also using an Ad-aware and spy boot Search and Destroy. All these tools prevent system of Trojan and Virus attacks. You should use it too.

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.