Satellite Pro A200 - external screen resolution

Similar Questions

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro A200-MV - passes resolution to 1024 x 768 only

  I have a problem with my screen resolution.
  Usually, my laptop resolution is 1200 X 800.

  It is now changing only up to 1024 X 768. Sometimes, its original resolution changes.
  Can anyone tell how to cure it.

  Hello

  What is 1024 x 768 resolution changes automatically?
  Sometimes when starting the laptop?
  Do you use the preinstalled Toshiba image?

  Sorry, but it of not very clear to me how what happens

  But I have a few tips;
  First of all, you need to update the graphics driver and it would be wise to check the current BIOS on your laptop.
  If a newer BIOS is available on the Toshiba page then try to update also.

• Matte screen disappeared on Satellite Pro A200

  I have a Satellite Pro A200 which works fine on an external monitor, but is very dull on the laptop monitor.
  Anyone knows if it's backlit and if the lights are replaceable, or do I need a new screen?

  FN + F5/F6 does nothing. Correct brightness with the software works on the external monitor, but not on the laptop.

  Thank you

  RickC

  > Is - anyone knows if it's backlit and if the lights are replaceable, or do I need a new screen?

  It could be a FL. inverter problem In the worst cases the problem internal display, but at this point, I suppose that it s inverter malfunction only an FL.

  Recommend trying to replace the FL inverter first, since this part is much less expensive than a screen.

• Satellite Pro A200-CH7 - flickering on external monitor

  I have a Satellite Pro A200-CH7 and have the same problem with my external monitor.

  It's a Viewsonic VX2262WM of 22 "and I see flashing on the screen. I tried the monitor on another laptop and it worked fine.
  The question is the graphics of cards my Toshiba laptop.

  Hello

  Perhaps twinkle could be linked to bad land?
  Sometimes, this could affect the external display.

  Please check if the problem goes away if you unplug the adapter from the laptop

  Welcome them

• Re: Satellite Pro A200 - no activity - nothing on the screen

  Hello!

  I have a lot of problems with the Toshiba Satellite Pro A200.
  Same problem for all: when you connect the power adapter led turns blue!
  When I press on "on" button the second led turns blue, the fan runs for a while, but there is not activity: nothing on the screen.
  No thing hard disk led...

  I have a lot of this problem with the Satellite A200. The motherboard is a LA - 3481P.
  I am an electronic engineer and I m specialized in laptop repair card main but I did not understand this problem.

  Can U help me telling me that maybe the defective chip?
  Thank you very much

  Hello

  I don't know if you saw that this forum is the forum of users and you should not wonder if nobody can give the exact answer. As an electronic engineer, you must know that no one can answer specifically and to find the good chip, you must run diagnostic tool.

  So I think that you need professional help. Try to contact nearest Toshiba authorized maintainer and ask for help.

  BTW: I am really interested about new comments here.

• Satellite Pro A200: There's a problem with my screen

  Hi all

  I wonder if anyone can help. Just got a Toshiba Satellite Pro A200, when I cleaned the screen, I noticed that in the Middle at the top (the part under the webcam) pushes a little and squeaks. It's not normal, I'm wrong?

  Help, please!
  Thanks in advance,
  David

  It's not easy to tell if it of normal or not in most of the cases the ASP must check the notebook and then the technician could decide if a part needs to be replaced

  I recommend you contact the ASP in your country and ask for details as well as a control of the laptop.

  Good luck

• Satellite Pro A200-PSAE7: error on blue screen - ati2dvag infitive loop

  I've got Satellite Pro A200-PSAE7 with ATI Mobility Radeon HD2600. I downgraded to XP SP2. I get a blue screen saying that ati2dvag went infitive enough loop constantly. Any solution to this?

  OFFTOPIC: Why standart drivers from ati.com to display does not work? (while on my laptop of friends with also hd2600 mobilty radeon works fine).

  Hello

  > I've got Satellite Pro A200-PSAE7 with ATI Mobility Radeon HD2600. I downgraded to XP SP2. I get a blue screen saying that ati2dvag went infitive enough loop constantly. Any solution to this?

  The BSOD appears usually due to software malfunction serious matter or material.
  I think it s a software problem (driver).

  I presume that the BSOD appears why play games in most of the cases the graphics driver must be updated.
  If the XP driver from the Toshiba page will not help, you can try the graphics drivers on the www.omegadrivers.net site. 3rd third party drivers must run on your laptop. But note; 3 third-party drivers can be used only at your own risk!

  > Why standard ati.com display drivers do not work? (While on my laptop of friends with also hd2600 mobility radeon works fine).
  Cannot install the original ATI drivers on an easy path because this drivers don t support protection against overheating. Toshiba GPU drivers are slightly modified and support a protection against overheating. This protection is necessary and important as mobile graphics cards do not have large module of cooling as the GPU on to desktop computers.
  Temperature increases on the much faster laptops and so the driver graphic control performance of the GPU to reduce the internal temperature.

  That's why it of always advised and recommended to use the Toshiba drivers ;)

• Satellite Pro A200-1MA: blue screen STOP: 0x000000D1 Error

  Hello

  I have Toshiba Satellite Pro A200-1MA and Vista 32 bit. My problem is: when I work on my internet laptop notebook and use blue screen shows:

  http://img142.imageshack.us/my.php?image=dsc00238yh0.jpg and resets.

  Sometimes not regularly, but often enough [sometimes 1 by day, other times 3 per day].
  It becomes quite boring, I can't work on a laptop without fear, I have nevery secondly it may restart and I will lose any unsaved work.

  Thanks for help.

  Hello

  Do you use the preinstalled Toshiba image?
  I ask because sometimes the BSOD can be caused by serious software problem. But to be honest, it looks like a hardware malfunction.
  In my view, the RAM modules could be affected

  I have a 6 year old using my laptop BSOD the BSOD appeared after several hours of use one I thought that it s a faulty RAM I replaced it, but the issue was not resolved finally I discovered that the temperature affected modules of RAM alone and the laptop froze and BSOD appeared
  Finally, I checked the grids of cooling and cleaned using compressed air jet that it helped

  But buddy note; This does not mean that your problem can be caused by high temperature. It s only a hypothesis, and in my opinion, a technician of the laptop should check the laptop to ensure that's exactly wrong.

  Good luck

• E540 + Dock among Pro - max of the external screen resolution is 1280 x 1024

  Hello

  This issue could be discussed and resolved already somewhere else, but I couldn't find a match for my situation:

  I recently bought the ThinkPad E540 with Pro among docking station, in which I have connected my external LG Flatron IPS236 monitor. LG max resolution is Full HD 1920 x 1080, but for some reason any the max of my external screen resolution is only 1280 x 1024. The screen is connected to the station Pro among DVI port. I have two day of the graphic card drivers and the LG monitor drivers and started the system. I also tried using 75 hertz and framerate of 60 Hz, but without any help.

  What should I try next?

  HA, I finally got. Research on the subject long enough, revealed the cold made that updated Lenovo systems do not provide you with the last set of drivers (graphics card). On the contrary, it prevents actually update you the drivers downloaded from the provider (Intel) site. * beep *.

  So was the solution for this:

  -Remove the display card drivers (Device Manager / display adapter / preferences / adapter / uninstall)

  -The latest drivers downloaded from the web site of the hardware vendor intall

  BUT PLEASE NOTE:

  Just after I had uninstalled the original display card drivers both the external display and the display of the desktop became black. I had to reset my computer and start Windows Mode safe, where I was able to install the new drivers.

  Now my question for Lenovo is: * beep *.

  Why is - that you can not simply to allow installation of the latest drivers from map display through your own update system OR simply give users the ability to update the original adater than newer display drivers.

• Satellite Pro A200 PSAFCA: need driver Lan and screen for XP

  Hey

  Please help me!

  I just installed XP on my new satalite pro, but I had trouble with the drivers.
  For the moment, I installed most but from this site, I can't seem to find a driver that will help my network card, or my video NIVIDIA player...

  any suggestions would be very valuable

  The Satellite Pro A200 PSAFCA is unclear to me. I know the PSAE1, the PSAE4 and the PSAE7Satellite Pro A200. So could you please confirm your Pro A200 series?

  If you do not find only XP drivers on the Toshiba page I would recommend checking the LAN and graphics chip installed on the motherboard and use drivers XP from the manufacturing of the chip.

  If you need a graphic driver, I advise to use the drivers from the site www.omegadrivers.net or www.laptopvideo2go.com

  Concerning

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• Seeing white on Satellite Pro A200

  The screen of my computer (Satellite Pro A200 - PSAE7) became white and will not normalize. This happens as soon as the boot. However, other processes are underway normally. Currently, I have to rely on an external monitor or LCD projector to allow me to continue my work.

  What could be wrong and what can do?

  Hey,.

  > Currently I have to rely on an external monitor or LCD projector to allow me to continue my work.
  This means that an external monitor works properly, no?

  Well, there are two possible reasons: either the internal LCD screen is defective or LCD cable but the graphics card and the software are ok if everything works on an external monitor.

  You see a picture if you move the internal screen a little? So, you can check if there is a bad connection. If you are familiar with the disassembly of the laptop, you can open Notepad and check the connection also.

  An alternative you can also ask a maintainer approved assistance. Disassembly of the laptop is not a problem for guys so just get in contact with them. ;)

• Need information on display on the Satellite Pro A200-1SS

  Hello, I m about to buy the Satellite Pro A200-SS, but I m interested in what I should expect from its display. Is this enough to play games? What is an answer of this LCD? I also heard that the various types of LCD screens are assembled in this book, is it true?

  If so, please, try to name and describe them - the most important attribute for me is a response and usability for playing games.

  Well, I hope that someone will answer my questions. At latest.

  Hello

  Check this box
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=137018

  Satellite Pro A200 is equipped with a screen 15.4 "screen Toshiba TruBrite WXGA TFT high brightness - internal resolution: 1280 x 800

  It of a really a good laptop screen. Trubrite technology makes very clear photos.
  It is really good to play the game