Application loader is to expire instead of loading the new binary

Similar Questions

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• I cannot load the new 5.3 LR

  I cannot load the new 5.3 LR with the 1642 error msg?

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe_Lightroom_x64.msi_5.3 -----------  ERROR: Install MSI payload failed with error: 1624 - Error applying transforms. Verify that the specified transform paths are valid. MSI Error message:  ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624  ------------------------------------------------------------------------------------- 

  Hi Blecho,

  You get the same results if you download the update 5.3 directly from here? Lightroom 5.3 now available:http://blogs.adobe.com/lightroomjournal/2013/12/lightroom-5-3-now-avai lable.html

  Let me know how it goes.

  See you soon

  LP

• Too late to load the new SWF after unloading the current SWF file

  Hello

  In our application, we use more than 10 sovereign wealth funds. When you cross one SWF to others try to unload currently load SWF and load a new. We were successful to unload the existing SWF, but the problem, takes too long to load SWF again (more than 5 seconds). Please suggest a useful method to overcome this time for best performance.

  get an idea of the following code snippet.

  Thank you

  
  public void SwitchSWFs (): void

  {

  If (null! = SystemAgent.getInstance () .currentSWFLoader)

  {
  SystemAgent.getInstance ().currentSWFLoader.unload ();
  SystemAgent.getInstance () .currentSWFLoader = null;
  trace ("HomeUI: previous swf unloaded!");
  }
  on the other
  {

  }
  addChild (SystemAgent.getInstance (.swfLoaderSecondSWF));
  SystemAgent.getInstance () .currentSWFLoader = SystemAgent.getInstance () .swfLoaderSecondSWF;

  }

  
  will call by clicking a button
  public void LoadSecondSWF (): void

  {
  SystemAgent.getInstance (). swfLoaderSecondSWF.load (new URLRequest ("Second.SWF"));
  SwitchSWFs();

  }

  The delay is when you test locally?

  One thing you might try is to load all Chargers present you at the front they are needed so that there is more likely that they are ready to be added to the display list when it is called for.  So instead of having the button trigger loading the SWF, just it call the switchSWFs function.

  Another thing, you could try if you keep it where the Triggers button load the corresponding file to assign an event listener for the charger to detect when it has finished loading and then have this listener event handler function calls the switchSWFs function.  At least this way, the current swf file is not unloaded until a replacement is ready and waiting.

• When you click on a photo on facebook that loads the new popup, Firefox crashes 10 androgenic. Just Firefox crashes and unresponsive. Is there any solution for this?

  When you click a picture that load the popup that Facebook has recently presented on the occasion of just Firefox crashes and unresponsive and them must be closed using the Manager tasks. It does not occur every time say for every 2 of 10.

  That's what the error report says...

  Description:

   A problem caused this program to stop interacting with Windows.
  

  Signature of the problem:

   Problem Event Name:	AppHangB1
   Application Name:	firefox.exe
   Application Version:	10.0.0.4411
   Application Timestamp:	4f2548ce
   Hang Signature:	4813
   Hang Type:	0
   OS Version:	6.1.7601.2.1.0.256.48
   Locale ID:	2057
   Additional Hang Signature 1:	4813d58d219b01045ae1404b21f04466
   Additional Hang Signature 2:	ec05
   Additional Hang Signature 3:	ec057c79f467a3033cec4ebe11500204
   Additional Hang Signature 4:	4813
   Additional Hang Signature 5:	4813d58d219b01045ae1404b21f04466
   Additional Hang Signature 6:	ec05
   Additional Hang Signature 7:	ec057c79f467a3033cec4ebe11500204
  

  • Firefox plant - troubleshoot and prevent assistance fixing crashes
  • Firefox crashes or does not - how to fix

  If Firefox crashed, then please provide Crash ID here.

• Windows 7 - "USB device not recognized" - to load the new electronic Cigarette device. Help, please?

  I have Windows 7 Home Premium.  I just bought a unit of the electronic cigarette, manufacturer is "Innokin Cool Fire IV", the usb charger plugged on Acer laptop and comes to the screen "USB device not recognized".  I loaded different brand before without problem, I don't know what to do and I am NOT GOOD WITH COMPUTERS!  My settings are at "install updates automatically" and I DON'T WANT WINDOWS 10!  Can someone help me please?  Thank you for taking the time to read this.

  This seems to indicate that the charger has actually been detected as a device, but Windows can not work it out.

  Normally such a device should only connect to 5v and 0v pins and have no connection with the pins of data, in this way, that it will not be seen by Windows. I would be concerned by the quality of the device if it has some form of data connection. If you want to continue with this charger, that I would recommend to use a power supply of 5v USB instead of risking the USB port of the laptop, a lot less expensive if it does not. It has been reported several eCig Chargers catch fire. Something like this:

  

• refuse to load the new homepage at startup (Windows 7)

  After the recent updates, the browser refuses to load a new homepage at startup. It "remembers" the old address, always. Probably he did not record line after the change even though he seems to have this session. Therefore, when opens again, he returns to the old address of the home page. See you soon.

  Hi yuenct,

  You should take a look at the Knowledge Base How to set the home pagearticle.

  There are the steps in this article to reset your preferences on the default home page. I would try everything first to clear all strangeness. If it works, you can try to set your homepage again to your personal preferences.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• Load the new XP Pro SP2 OS on Portege R200

  I have a R200, bought in Russia (where I work). I want to install an English version of XP Pro SP2.

  I intend to reformat and install from scratch. Then load all the utilities of Tosh from a CD, I created.

  Loading the XP CD and restart then the installation of Win XP Pro does not recognize Toshiba PCMCIA DVD Rom CD - RW I plugged.

  So I created the 6 boot disks for SP2 on the site of Ms.

  I start from the startup disk, all goes well but until I get to disk 6. Next, I get the windows error blue screen exception etc.

  Beyond that, I can't get to format the drive for a new installation.

  When start I have now the option for the Win XP Pro and WIn XP Russian, although the latter is going into the installation routine that cannot see a CD drive Yes F3 and restart.

  Any ideas?

  As far as I know that you need a support disk Toshiba (PCMCIA card 16-bit cardbus)
  I found an info that the readers should work:
  PA3402E-1DV2
  -PA3352E - 1 CD 2

  To my knowledge, you must press button P and it should be possible to start PCMCIA player. To boot from the disk, you must use the C key.

  Please check these messages:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6749&MessageID=23319

  In this announcement, you will find the compatible players to begin the process:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9291&MessageID=32612

  Please use the wonderful advanced search of this forum.
  Here you can search for similar comments that should help you.

• Printing error after loading the new cartridge

  After loading a new cartridge (genuine) 338, everything I print has the top of the first line is missing. I rebooted the old cartridge and it prints the line correctly (even slightly). I tried to reload a new, but it still does not print correctly. The alignment test after loading was very good. Can anyone help me to solve the problem or is it just a faulty cartridge?

  Rich thanks for your help and for taking the time to answer my question. I'm sorry that I was not to give complete information about the printer, as this has been my first post - I'll do better next time. The issue has resolved itself today! After several attempts to print and reload the cartridge, I dropped, but unexpectedly, the printer has pulled up and began to do a second test of its own alignment, and that solved the problem.

  Sue20

• Load the new Dell XPS 13 9350 via thunderbold usb - c

  Recently bought the new Dell XPS 13 9350, 1080 p with the i5 processor version and I would like to know how to load the xps 13 via usb - c port sight.

  Which cable I'm able to use? I would like to use a male USB - A to USB - C cable to recharge the laptop using usb Sockets aircraft.

  Tracked down the answer:

  It does not simply with phone chargers. He needs Chargers portable a higher voltage. You cannot use cable USB A-To-C to load (unless you have a defective cable seriously, which can damage the charger). You cannot use the Nexus 5 X, 6 p or OnePlus Chargers.

  12-9250 Chromebook Pixel 2 and XPS (and perhaps a few other upcoming 2016 Dell systems) include a USB - C charger that works with the XPS 13 and 15. Chromebook Pixel charger is a wall wart, unlike most chargers for laptop with a brick in the middle.

  Buy a compatible USB - C charger costs as well buy a normal replacement Dell laptop computer charger, so it is honestly not much unless you want to use it on other USB - C devices (whether now or in the future). The Pixel charger can also with phones, but I don't know if the XPS - C USB charger can also.

  You'll also USB - C load with docks. Any USB docking station - C and any wharf 3 Thunderbolt should work with it. Dell has wo of them towards the end of the month of January each offers multiple output video, USB - A, Ethernet, audio ports and in charge. Plugable and some other manufacturers some too.

• Reformat and load the new system full of dv9925nr

  Reformat and full load new system need factory web site backup disk will not show order me form with the application of disc

  If the link with the command isn't on your Support page then HP will not yet have them in stock. Site of third here is $27.

  http://www.computersurgeons.com/SearchProducts.aspx?SBT=dv9925nr&BKM=results#results

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• Wrong language loaded the new Satellite C660 - 2DL

  Hi all

  Brand new C660 - 2DL, some how the wrong language (Finnish) loaded at startup, there is anyway back? It should have been English. I think I would die if I don't find a cure!

  All wellcome idears (don't forget that everything is in Finnish.Thank you.
  John Citycoach

  Hello John

  Have you bought your machine to the United Kingdom?
  Can you please post all part number (PSC1LE-xxxxx)? You can find it at the bottom of the label of Toshiba.

• I need to enter the password to load the new software, but I don't remember ever having a password how can I solve this problem?

  I am trying to load new software on my computer but it keeps asking for a password for security and I do not have a password! Can I put this somehow?

  Maybe he wants your administrator password.

  It is the MSE Forum and is not a question about anti-malware Microsoft Security Essentials (MSE) program.

  Suggest that you post your question in the appropriate forum for your operating system: http://answers.microsoft.com/en-us

• My computer was not restart and I did a restore of the factory system, and it would not load the new screen?

  My computer has been restarted not and I have to click the button 3 or 4 times just so he can work. I use it for school so I really need to work and so I did the system back restore to the factory settings and it did again when the screen would not load but now it works. I left it only after I did 8 hours? that is the problem or do I do it again? I mean restoration?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you can doot:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.