application unspecified fatal error?

Similar Questions

• BlackBerry Smartphones Blackberry Curve 8330 - fatal error during the Application Loader

  Using the Desktop Manager V5.0

  When I connect my BB 8330 to my PC (USB connection) the Application window updates appears showing me all the new update, I click on the task updated current opens, then the Update Summary window, showing all updates to do, they are all 4.5.0 updates, click Next. Task progress window open once again, 11 task first 3 are fine on my BB, just complete backup 4th task is "Connecting to device ROM", at this point, it appears that even if my BB is turned off or rebooted, the task bar says "Connecting to the boot ROM", my BB business if it's rebooting , spinning hourglass, then I get the notorious "a fatal error has occurred." by updating the software on your device, please try again on the Desktop Manager

  At this point my BB is finally coming back to the main screen as if it were able to tap new. My Desktop Manager does not see that my BB is more connected and I need to stop and restart my PC to connect my BB for the Manager of office again.

  I hope this was enough detail, does anyone have an idea how to get by this error? What he does when he tries to connect to the rom of the device? Why it looks like it turned off my BB?

  Any help would be greatly appreciated

  Hello!

  Here's a knockout who deals with this error:

  • KB02696 "Could not complete the load operation. Fatal error occurred during the update of pocket"error displayed when you try to reload the software on a BlackBerry smartphone

  I hope that it contains something useful!

  Good luck and let us know!

• Virtusa Tennis 4: Fatal error! Could not initialize the Games for Windows Live. This application will be closed.

  Original title: Virtusa Tennis 4

  Virtua Tennis 4 error message has

  "Fatal Error!"
  Could not initialize the Games for Windows Live. This application will be closed.

  Hi Ravikumar,

  Of Virtua Tennis are what version you try to work with?

  It seems that Virutal Tennis version is not compatible with Windows 8.1, you can check the Windows Compatibility Center.

  See also:

  
  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  However, uninstall the "games for Windows - LIVE redistributable Microsoft" and 'Microsoft Games for Windows Marketplace' and resettlement of http://www.xbox.com/en-US/Live/PC/DownloadClient allowed little such users mentioned by ' GeraldLuger answered December 30" provided article.»

  Virtua Tennis 4 - games for Windows LIVE
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/Virtua-Tennis-4-games-for-Windows-Live/81e86e55-6d8c-4703-B09E-190306110238

  Hope this information helps. Response with status so that we can help you.

• a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as files cpbackup

  Hello

  We have Adobe Captivate installed 8.0.0.145 Windows 7 x 64 v.

  Activate Adobe crashes with the following error: a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as cpbackup files.

  I uninstalled Adobe Acptivate, rebooted the PC and reinstalled activate Adobe - unresolved error.

  I have cleared the cache under settings, clear the cache - unresolved error.

  Please notify.

  Kind regards

  George

  
  

  The update should be available to help, updated. It is available since October 2014.

  Being administrator is not the same thing as Captivate running as an administrator that must be put in place in the menu right click on the shortcut that launches Captivate. You have restricted functionality if this is not done.

  I told you how to clear preferences, with the file Utils. First close Captivate, when you restart CP will create a new preferences folder.

  

  If you have a lot of customization that you will lose when the erasing of the preferences. To keep them, have a look at my blog:

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

  Layouts folder is located in the public Documents. It is a copy of the original folder in the gallery. Same thing with the Interactions.

  

• My laptop HP application password BIOS Fatal Error Code: 77005065

  Help, please

  My HP laptop is also asking password BIOS Fatal Error Code: 77005065

  Try

  68963061

• Fatal error: T2K install Service - Tier Applications

  Hey all.

  I install R12.2.0 on an env several nodes. I can't get past this problem.

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: output = 100 see Journal for more details. CMD = perl /home/apps/VIS/fs2/EBSapps/10.1.2/OPatch/opatch.pl apply - verbose - silent - ocmrf /home/apps/VIS/fs2/inst/apps/VIS_ebstestapp/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp/home/apps/SCREWS/fs2/inst/apps/VIS_ebstestapp/temp/patches/16271876/16271876

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:296)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:68)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Cannot Patch 10.1 Set.2.

  I make sure that my env is correct and I saw 2 notes Metalink who talks about environmental cleanup and to ensure the right files in the location. To do this. Can someone help me please. I tried to find the right notes so that I can grab the papers, but I don't know what newspapers I need. Any help with honestly appreciated.

  Thank you.

  I have no idea why this work, but this fixed the problem for me:

  Cleaned the tmp folder and installation directory. Then I deleted all the directories created buildstage.sh.

  Unzip the patch startCD o

  New buildstage.sh HS

  Successful installation.

• Fatal error when installing the Server Application Weblogic 11 g (10.3.4)

  Hello

  In the first attempt, I installed a Weblogic 10.3.4 server but when I was deploying an ear, server gets crashed (JDK was crushed) and after that, I was unable to start the server because it gave an error JDK.

  So I uninstalled existing Weblogic server and tried to install the server (same version using the same configuration) once more, but it does not. It asks me for the directory (WLS Home Directory), Complete/Custom and finally the installation, it is down a mistake (when 39% installation is complete) 'fatal error occurred during installation of the file and install it will cleanup now, out! " \Wlserver_10.3\common\bin\consol.exe C:\ < host directory > (access denied)".

  Can someone help me please to solve this error. Thanks in advance

  Kind regards

  Priya

  Hello

  The message that took place there is a permission problem. So could you please try the installation with administrator privileges.

  In case if the same mistakes persist could you try to install another directory C in a different way.

  Kind regards.

  Prakash.

• Tecra A9 - Blocking Power Saver - fatal error code: 0 x 2

  Hello

  Today, when I turned on my computer the energy saver has started planting.
  I rebooted the computer several times and the result is always a fatal error has occurred. The program will end. Code: 0x2.

  Even this error appears when I try to reinstall the application.
  Perhaps it has something to do with SP3, I have installed a couple a days ago.

  Someone has an idea?

  Martin Vassilev.

  I saw this error for a long time with Windows XP Home edition. In my opinion it has nothing to do with SP3.
  My experience says that you will not be able to solve this problem. There is something wrong in the registry entries and reinstalling will not help.

  One method can help, OS install new one, more radical using recovery media.

• Utility of Eve begins with the fatal error

  I have a problem with my laptop satellite A105-s4094, it was purchased from an individual and I don't have a rescue CD, and it informs to me an error:
  energy-saving a fatal error has occurred. The program will end. code 0x7E

  How can I solve it? Thank you

  Hello

  What to say. This error was caused by Toshiba Power saver.
  Now you will ask what to do well, usually there's not a lot to remove this software, reboot the laptop, clean the registry and reinstall this software.
  This should help.

  For example, there are many applications clean registry: CCleaner

  By the way: you said that you have received or bought the laptop without the recovery CD.
  Well, each CD can be ordered from the ASP in your country and it s not expensive. You must take this option

• Satellite A11-998: fatal error Power Saver - code: 0x7e

  I recently bought a Toshiba Satellite A11-998. I upgraded the operating system of Windows XP MCE to Windows XP Professional. As some of the drivers were not picked up, I was download the latest drivers from the Toshiba site, but when I install the Toshiba Power Saver, utility, I get the following error;

  "A fatal error has occurred. The program will end. "Code: 0x7e.

  The only option I is 'OK '. When I start the machine and Windows journal, I was invited with the same message, even, when I try and uninstall the energy saver utility. Is it possible to completely remove the utility, or can anyone suggest how to solve the problem. Any suggestions much appreciated.

  See you soon

  It seems that there is no general solution for this problem.
  I found some comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate the error message.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11238&MessageID=40588
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9573&MessageID=33773

  But how did you install the entire operating system? Did you follow the installation instructions on the page of the Toshiba driver?
  The order is very important and necessary if you want to install the Toshiba applications on your operating system.
  I also discovered that the laptop uses Power saver power saver utility and driver.
  I think you need to first install the driver and utility.

  But everything should be described in the installation instructions

• Code Toshiba Power Saver Fatal Error 0x51A Tecra M9

  I just bought 5 Tecra M9 and I have the same problem with them whenever I start the laptop:

  "TOSHIBA Power Saver.
  A fatal error has occurred. This program will be terminated code 0x51A'

  And sometimes:
  "TPSMain.exe Application error".
  The application failed to initialize properly (0 x 0000043). Click OK to close the application '

  If I try to open Toshiba Power Saver utility from the control panel it return me to select power mode Toshiba in the list of management of power supply in Power Options, but there is not any diagram power Toshiba on the list.

  Any suggestions?

  Thank you.

  Hello

  Have you tried to reinstall the Toshiba power saver utility?
  Please do it!

  I had a similar problem of Eve on my laptop satellite.
  I finally solved this problem by reinstalling the energy saving and the utility of Modules common Toshiba.
  The common modules are required to run other programs from Toshiba as for example energy saving.

  Just another clue; especially this program error appears because of a corrupted registry.
  You can use the freeware like CCleaner to clean the registry entries.

  Best regards

• EliteBook 820 g3: fatal error in HP connection manager

  Hello

  I just bought this laptop and having a fatal error "Object Reference is not set to an instance of an object" whenever I start the HP connection manager.

  I need this application to subscribe to my HP Mobile Connect Pro service...

  I try to follow the solution being http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Fatal-error-in-HP-Connection-Man... in vain.

  Any help / suggestion to solve the problem?

  Thank you.

  For those who have the same problem and who can not susbcibe to service, just ignore the error popup and continue the sign-up process (make sure you have all of the displayed window). Normally, you must complete the process and after reboot, connect to the service using the service of standard network provided by windows 7 instead of the applications of the buggy HP connection manager.

• DLL from the Windows API (user32.dll) causes a fatal error

  Hello
  On installation, we using a touch screen. LabView software is running in full-screen. I need to deactivage my Panel before if the screen saver is to warn the user start anyting. I use user32.dll SystemParametersInfoA and it works well, except, if I left the software. "myexe a fin a mistake and should be closed" (something like that my XP is in french).

  I have no issues in debug mode, this error happens in exe mode.

  I use LV 8.6.1. Do you have any idea why?

  Thank you

  CFiset wrote:

  Thanks, I'll take care of the details. But unfortunly, it does not.

  uint32_t SystemParametersInfoA (uint32_t SPI, uint32_t 0, uint32_t * value, False uint32_t);

  SPI = 114 = SPI_GETSCREENSAVERRUNNING

  If * value! = 0, screen saver, ON the other scresaver OFF

  Still have the fatal error of Windows.

  Thank you

  I noticed the node having a rather odd way of user32.dll on the initial load of the library call. You happen to have copied this DLL somewhere and SEO with full path to your VI?

  It is a very big NO-NO! User32.dll and several other Windows system dll weird for the system and are all bad behavioured if you try to load another copy elsewhere on the disk as the system directory. Just rename the user32.dll library only and let Windows choose the good DLL from the system directory.

  Another problem with specifying the full path to a copy of such a DLL, it of that LabVIEW you will think that you must have this built application-specific DLL and will include it in the build. However your user32.dll is almost 200% VERY incompatible to any other Windows system there, because of the Windows Service Pack version and upgrades of the correction of a bug, as well as different versions of Windows.

  Rolf Kalbermatter

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• Sync problem with Palm Tungsten E2 &amp; PC - Fatal Error Message on the screen of the PDA

  Recently my Palm Tungsten E2 will not synchronize with my PC. The following message appears on the screen of my handheld Palm when it tries to sync: "Fatal Error. ' Mgr.c, Line System: 4038, error launching Application. And a "reset" icon under the message that when activated, cause my PDA to reset through the sequence of the display date/time, etc. My PC system is Windows XP Professional. I recently updated my program to sync Palm from 4.2 to 6.2, which does not fix the problem I have. Your suggestions please?

  For this type of error, you need to reset hard E2. I hope that you have all your data in Palm Desktop. After the hard reset, change the desktop hotsync conduits replaces handheld and synchronize.

  Click on the following link for the Web page of kb.hpwebos.com for the article about reset procedures

  http://KB.hpwebos.com/wps/portal/KB2/common/article/887_en.html

  You can export your data for backup purposes, first in case something happens during synchronization.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.