Satellite A11-998: fatal error Power Saver - code: 0x7e
I recently bought a Toshiba Satellite A11-998. I upgraded the operating system of Windows XP MCE to Windows XP Professional. As some of the drivers were not picked up, I was download the latest drivers from the Toshiba site, but when I install the Toshiba Power Saver, utility, I get the following error;
"A fatal error has occurred. The program will end. "Code: 0x7e.
The only option I is 'OK '. When I start the machine and Windows journal, I was invited with the same message, even, when I try and uninstall the energy saver utility. Is it possible to completely remove the utility, or can anyone suggest how to solve the problem. Any suggestions much appreciated.
See you soon
It seems that there is no general solution for this problem.
I found some comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate the error message.
But how did you install the entire operating system? Did you follow the installation instructions on the page of the Toshiba driver?
The order is very important and necessary if you want to install the Toshiba applications on your operating system.
I also discovered that the laptop uses Power saver power saver utility and driver.
I think you need to first install the driver and utility.
But everything should be described in the installation instructions
I just joined my M70 to a domain (SBS 2003) and get this message when I connect to the domain.
If I was able to connect to the account of local user on the laptop then it works fine.
If I go into power options in the control panel and select a different power mode then the error disappears but I can't select TOSHIBA Power Save plans in the combo of plans.
See you soon
Maybe the power saver utility and power saver driver are not installed for all the user accounts on the M70.
Or all user accounts are not allowed to use power saver utility and driver power saver.
On the Toshiba driver page, you will find the Toshiba Power saver utility and the driver of Toshiba power gain.
Both applications must be installed and run together.
> If I go into power options in the control panel and select a different power mode then the error disappears but I can't select the TOSHIBA Power Save system in the combo of plans.
It is clear. If Toshiba power standby mode will NOT be chosen in the Windows Power Options, then you will not be able to use the Toshiba power saver.
Whenever I start my Satellite Pro M70 I now get an error Toshiba power Saver.
It reads "Toshiba Power Saver A Fatal error has occurred. The program will be terminated code: 0x0.
Can anyone suggest how to get rid of it.
It's not easy to say why this power saver utility error message, but generally a new installation of this tool should solve the problem.
Have you tried to reinstall the energy saver?
I have a Satellite a60 laptop
I installed windows xp home sp2.
I downloaded the drivers from the toshiba site and I met problems with three of the programs.
one is the 'Hotkey utility"which does not work and the only (when run in the CMD window)"program too big to fit in memory"message and does nothing.
the second is with the hotkeys "display" utility which after installed said that "driver is not found.
the third it 'energy savings' which, when installed alone gives an error: "a fatal error has occurred. "This program will be terminated code: 0x7E.
What should I do to solve these problems? Help, please
Why do you not use the Toshiba Recovery CD?
On this CD, all of the programs, tools, and drivers of Toshiba are preinstalled and should work without any problems. The installation is very easy.
I have a toshiba satellite pro A100-psaase!
I could not find this model on the toshiba site, so I chose the A100-psaas software.
The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.
I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.
My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.
The funny thing is that I have internet and all.
I can't find a solution to these two problems
You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.
The LAN drivers are also published on the page! There are 2 different versions. Try them both!
The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!
I just installed XP and I came across a problem that is boring. When I finished to install Power Saver and the driver, I got a message saying fatal error and I thought it was because I haven't restarted. Then, after only a day or 2 later I went to the energy saver and he said cannot open because you don't have access rights to "Toshiba Power Saver.
Is there a solution to this
I put t know if this is a solution but try my proposal:
First of all, remember that you are registered as an administrator or make sure that you have administrator rights.
Remove your old system energy saving. You must remove the driver and utility.
Then reinstall the computer and clean the registry using the freeware like CCleaner.
Then install the driver of saver of power and after reboot the new install standby power plant.
I hope it helps
I have a Toshiba Satellite L10-270 and because no standby power utility has been installed on.
Then I looked for the Toshiba Power Saver, utility and try to install it, but I was unable to make it work. The battery is very low, I really need this software to work.
Sometimes I get a message:
"A fatal error has occurred. The program will end.
And sometimes the message:
«Cannot be opened because you do not have access rights to use «Toshiba power saver»»
I hope you can help me, all brands have a power management utility work, I was hoping that it was the same for Toshiba. I hope!
Any solution, a way to run the Toshiba Power Saver or any other software that could replace it.
I have another question, where can I find the phone numbers and e-mail technical support or service after sale?
The energy saving was not preinstalled on this unit because this utility is not supported on this device (Satellite L10-270).
It would be very interesting to know where you found this tool?
I put t I think that this energy saving will not work properly because it was designed for another unit. In this case, you must use the Power Options of Microsoft Windows that you can find in the Panel
In addition if you want to contact technical support please visit this site. You will find detailed information.
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/csg_national_entry_page.jsp?service=EU&from=http%3 A / / www.toshiba-europe.com/
I just installed service pack 3 and when I restart my computer, I get this message. Fatal error has occurred. The program will end. Code: 0 x 57.
I have a laptop series Satellite A105-S2061.
Are there patches known for this problem?
What application is causing this error message?
What is the Toshiba Power Saver?
If so, then try to reinstall again the energy saver.
If the message will always be present while a radical solution can be successful; It would be the Toshiba Recovery disk and you need to reinstall new OS
I m do not know if this issue has something to do with SP3 or not, but maybe there is a problem of compatibility with some applications installed and SP3.
I have a Toshiba a60-392. I reinstalled Windows XP Pro in my book. Then I tried to install the Toshiba Power Saver. The installation seems to be okay. On the last screen, when I pressed the "Finish" button, it causes a fatal error. Then if I try to run the Toshiba power from the control panel Manager, it says that I have no right to do so. Finally, if I try to uninstall it, it causes the same fatal error during the installation process. The error message is: "a fatal error has occurred. The program will end. "Code: 0x7E. So I'm a little desperate. Any ideas?
Post edited by: yannischris
Post edited by: yannischris
Hi, you tried to uninstall the energy saver in Windows mode "economy"?
on my new Tecra M10, after logging in, I get a fatal error message "Toshiba Power Saver. Fatal error has ocured. This program will take end code 0 x 0.
I can't install a new download of Eve up what I uninstall the existing.
When I try to uninstall through Control Panel, I get the same fatal error.
You know the CCleaner?
It s free and it cleans the registry and OS, help you remove installed applications.
I recommend that you install this tool. Try it and you can use it to remove the energy-saving and clean the registry.
I recommend you to run more than once in the line in order to clean the whole registry
Should help you
Hello world. I own a M40-110
Can someone pls help me with the following:
Lately, I get the following error. "power saver fatal error occurred 0 x 0" any idea what this means?
Also ever since that time, my computer starts very slowly. Splash screen takes 3-5 minutes to open and once I have my screen is supposed to be up and indicator disc HARD running only turns blue and my screen gets frozen.
going to go crazy I bought this computer a month ago...
Try to recover your operating system with the recovery CD.
If this problem of still images, I suggest you contact the ASP.
If your laptop is only a month, your warranty will cover all replacements.
But first check if it s something wrong with the operating system.
Excuse my lack of knowledge.
I received a Satellite M70-173.
to turn on before charging readings - fatal error; I have to save all my data and replace the hard drive.
I don't know if it's fixable and that's what I have to do. I also said that when you replace a HARD disk I need a recovery disk.
I reside in Cyprus and don't have is not easy access to the shops of style PC big supermarket.
I was wondering if I could use a generic HDD and if so is there a particular one that I need to acquire?
where would I go to get a recovery disk?
I got the laptop I can't afford to buy a new one at the moment and it is still in very good condition apart from the above-mentioned problems!
I wish that all the advice on what type of HARD drive, I would need or is available - rough cost so I don't get ripped off and if we change the disk HARD is as easy as I read. Also where I should go to get a recovery disc and if that's all I need to fix the laptop.
Thank you very much in advance for any help I can get.
> The laptop does turn on - is it possible to make a recovery of a damaged laptop disk
How do you do if you can't turn on the laptop?
What you could do is to remove the HARD drive, then place it into the drive enclosure HARD 2.5 external, then connect the HARD drive to another computer, to save the data.
In my opinion this is what you could do
Where can I download Toshiba Power Saver for Windows 8 x 64?
C850-1E7 satellite was already pre-installed with Win 8.
All Toshiba drivers and tools must be preinstalled too so I t understand your request because the energy saver
However, Windows Notepad 8 preinstalled don t contain the value added package plus this package was for Win Vista and Win 7 and Win 8 upgrade, but there is no PPV for units that are already pre-installed with Win 8.
I reformatted my laptop toshiba Satellite A100 PSAA8C SK800C today and I was expecting to download all the drivers and install them.
However, when I download the 'power saver' among the official website of toshiba, I was not able to install.
Not only that I can not install it, nothing pop out when I click on the zip file CONFIGURATION icon.
I have already installed all drivers for the laptop computer.
Can someone help me?
> However, when I download the 'power saver' among the official website of toshiba, I was not able to install.
First of all this laptop seems to belong to the Canadian series of Toshiba and if you want to use any tools Toshiba, then you will have to download it from the page of the Canadian driver Toshiba!
In addition, you can choose the drivers and tools exactly for the PSAA8C series.
In many cases, you will not be able to use the tools that are designed for other series!
We must therefore be sure that power saver downloaded has been released for the series PSAA8C.
For people who were having trouble installing the utility of Toshiba Power Saver on Windows XP, I found a solution for you.
Download the XP drivers for model Satellite P300 energy saving and you will absolutely find, just make sure you have the driver for the installed first P200 energy saver!
I hope this helps you solve your problems
That s a nice info.
Thanks for sharing this with us.
Maybe you are looking for
I would like to return to Yosemite to El Capitan as my v5 Adobe Photoshop crashes constantly, as now seems to be unstable since upgrading to El Capitan. Unfortunately I do not have a back up of my laptop on Time Machine (stupid, I know), so how can I
Why do I have to run WZC 871122 every time you start, to get on my wireless network?
I have Vista Home Premium 64-bit. I have done 3 installs clean for several days and each time I install SP2 and update the Windows Update Agent I can't get updates. When I click search for updates, it just keeps looking for hours and hours and neve
I bought my computer with Vista already installed without disks or product keys to talk about. When I get the product key 'system', provided that it is authenticated had "OEM" in a part of the key. It's true that I can't buy a Windows 7 upgrade ver
I need help! My CD/DVD drive has disappeared, it is not even in the BIOS, and all the other removable disks since I installed an update from Microsoft. I went through all the troubleshooting steps and nothing has worked, including the fix it. How can