ApplicationVerificationFailed with door-key-access-rights groups
Hello
We have a hard time to compile a version of our AIR for IOS application.
We had a first version compiled and successfully submitted to Apple.
WA are trying to build a new version, but are now stuck with the "ApplicationVerificationFailed" message when you try to deploy this application on a device (with an inhouse mobileprovision sdk)
In this new version, we have added 'Keychain-Access-groups' payments to allow the application to share data of Keychain.
If we remove the straight part of the application descriptor, it succeed with compiling and install on the device via the usb port.
Everyone has experienced problems with the definition of the properties of "Keychain-Access-groups?
I found these messages that are a bit outdated, and we even tried old workaround with codesign on a mac without success either...
support of iOS5 for AIR/external use SDK to package applications
I'm really stuck with it, we publish a group of applications that should share crendentials of license, with some applications developed in Aboriginal languages and others in the AIR.
Hello
To solve this, I had a bad bundle prefix id in the benefits section. (I build with inhouse sdk for internal versions and standard sdk for the appstore releases)
I found the problem with this tool (I'm on windows) by looking at the ios console log: iPhone Configuration Utility 3.6.2 for Windows
The newspaper said he had a problem with the value 'Keychain-Access-groups' not valid for the current profile of provisioning.
I'll actually invest some time in writing build scripts, because the process of manual switching between versions internal/dev/appstore is not error proof...
Eric
Tags: Adobe AIR
Similar Questions
-
Error "you don't have the appropriate access rights to perform this task.
Hi gurus,
I'm under Hyperion Smart View for Office version 9.3.1.0.247 on Excel 2007.
I encountered error "You don't have the appropriate access rights to perform this task" during its connection. I can't do other work after that.
The mysterious thing is that when I tried to create another user with the same access rights, I do not encounter this error at all.
Furthermore, when I tried to connect with another user who does not have this error, disconnects and immediately after, I me re - connect under the id problem with the same error disappears. (However, it reappears after a start of expenses excel place and first login with id problem)
Personally, I don't think its an issue access rights but more like a bug somewhere. Anyone encountered such a problem before?
To share your experience on what could be the problem and how to solve it.
Thanks in advance.
Rgds,
WongIf you [none] in one of the dimensions, assign read access to members [NONE]. For example, if you have a member called [none] in the entity, you would have to give read access to the [none] member of the entity.
HTH-
Jasmine. -
Compensation * for * rights dimensions with the security access import utility
Hello
I loaded the access of dimension for about 4000 members/groups with the ImportSecurity utility. Now, I want to delete those that we have changed the design of the security.
Already, I know the SL_CLEARALL option but this option is not useful because it will be not only clear another dimension access loaded earlier, but also my data form access etc.
What can I do? I will not delete these manually access rights, and I won't have to reset safety in the whole application, including security of types that should also be completely independent of the access of dimension.
Thank you
JMIt won't be a magic solution for to manage you your access permissions, LCM will allow you to export to XML or the exportsecurity to txt and then you have to make your manipulation.
See you soon
John
http://John-Goodwin.blogspot.com/ -
I use Windows XP SP3. He indicates that in help for Firefox 5 icons on the screen to click like the one to the far right of the tab to access the groups bar. I've never seen these so don't know if they charge for my setup or if I just need to turn them on somewhere (can't find anything in the menus there).
Firefox 4 and 5 seems different for some operating systems?
The icon tab groups is in the Palette to customize.
https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar
http://KB.mozillazine.org/Toolbar_customizationYes, Firefox 4/5 is a bit different on Windows XP that orange Firefox on Vista and Win7, the button is not displayed and the MenuBar on installations of Windows XP. Simply right click on the bar of Manu and turn off Bar Menu item on the shortcut menu.
There are also slight variations on the Mac and Linux versions, too.
-
How to set a new user in Enterprise manager with specific access rights?
Hello
I want to create a new user in OEM 11g which should be able to access only the jobs section of Scheduler.
How can this be achieved?You can create new directors through the installation--> page of administrators
You can grant some access rights to the target, you can not however grant private access only to the employment systemTake a look at http://download.oracle.com/docs/cd/E11857_01/em.111/e14586/security3.htm#sthref235
Concerning
Robhttp://oemgc.WordPress.com
-
Door key lost in the time machine backup
Dear community,
Because I had trouble with the speed of my MacBook Pro (and nothing else developed), I had to set up entirely new.
Before installing El Capitan, my MacBook Pro (starting 2011) ran on Yosemite 10.10.5. I made two backups with time machine, generated a bootable El Capitan installation USB key, in format Macintosh HD, installed at El Capitan and ran all the updates. The system works well, everything works perfectly and my Mac is fast again. Now, I manually copy things that I need in my system of charges.
Here, the problem is: I can't find the old keychain file in the time machine backup!
Keychain works with the keys stored in iCloud. However, the other buttons are gone.
As I discovered, ~/Library/Keychains is hidden. I did it visible on my system running. However, this does not work in the backup file. It remains hidden or - worse - have not been stored in the backup. I don't know that I have excluded from time machine backup only two totally different folders (dropbox and movies).
You have any ideas how I can find my keychain (login.keychain if my search was right) in the time machine backup?
Thanks a lot for your help!
Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.
If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.
The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.
The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.
Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.
The next part is 'Users', followed by a slash.
Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.
Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.
-
I want to do my second drive invisible to the user accounts on my PC. I downloaded a Microsoft program a while, but no longer have it. I don't remember what it's called and if I find it hard to find. It allow you to control access rights. Does anyone know of this program?
Assuming that your second drive is formatted with NTFS, you control access to the drives, folders and files using the 'Security' tab in the properties of the file/folder/drive. The following article goes into detail:
"How to set, view, change, or remove special permissions for files and folders in Windows XP"
<>http://support.Microsoft.com/kb/308419 >Note that this article deals with XP Pro. If you have XP Home Edition, you will not have access to the Security tab because Simple file sharing can not be disabled in XP Home. However, if you start mode (repeatedly tap the F8 key during startup key) safe and open a session as long as user with administrator privileges, you will be able to use the security"" tab. After properly configuring your security, you can restart your computer normally and will always stick settings.
Alternatively, you can use the 'CACLS' command from a command prompt window, but which becomes ugly.
HTH,
JW -
Remote access VPN group name and password
Hi guys,.
Can someone tell me please the command to display a remote access VPN group name and the password on a firewall version 8.0 of ASA? Any help will be greatly appreciated.
Thank you
Lake
Remote VPN IPsec IKEv1 access are listed as groups of tunnel. If you enter
more system:running-config | b tunnel-group
You can see the config sections (starting with the first mention of the tunnel-group) as well as the pre-shared key ikev1 plaintext String.
-
problem with users to access remote vpn site to site vpn network
I did the Setup: asa 5510 configured remote access vpn. My vpn users receive asa 5510 range 192.168.50.0/24 addresses and users access my local lan 192.168.0.0/24. the second side of the local lan 192.168.0.0/24 on asa 5505, I did a vpn site-to-site with network 192.168.5.0/24.on that both sides of a site are asa 5505. inside the interface asa 5510 Elise 192.168.0.10 and inside the interface asa 5505 have address 192.168.0.17.third asa 5505 networked 192.168.5.0/24 address 192.168.5.1. I want my remote access vpn users can access resources on network 192.168.5.0/24. I create the static route on inside the asa 5510 static route 192.168.5.0 interface 255.255.255.0 192.168.0.17 and a static route on inside the asa 5505 static route 192.168.50.0 interface 255.255.255.0 192.168.0.10, but it's not working. What do I do?
execution of the configuration of my asa 5510 is
Result of the command: "show run"
: Saved
:
ASA Version 8.4(2)
!
hostname asa5510
domain-name dri.local
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
nameif outside
security-level 0
ip address x.x.x.178 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.0.10 255.255.255.0
!
interface Ethernet0/2
description Mreza za virtualne masine- mail server, wsus....
nameif DMZ
security-level 50
ip address 172.16.20.1 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns server-group DefaultDNS
domain-name dri.local
object network VPN-POOL
subnet 192.168.50.0 255.255.255.0
description VPN Client pool
object network LAN-NETWORK
subnet 192.168.0.0 255.255.255.0
description LAN Network
object network NETWORK_OBJ_192.168.0.0_24
subnet 192.168.0.0 255.255.255.0
object network 192.168.0.10
host 192.168.0.10
object service ssl
service tcp destination eq 465
object service tls
service tcp destination eq 995
object network mail_server
host 172.16.20.201
object service StartTLS
service tcp destination eq 587
object service admin_port
service tcp destination eq 444
object service ODMR
service tcp destination eq 366
object service SSL-IMAP
service tcp destination eq 993
object network remote
host 172.16.20.200
object network test
host 192.168.0.22
object network mail
host 172.16.20.200
object network DMZ
host 172.16.20.200
object network Inside_DMZ
host 192.168.0.20
object service rdp
service tcp destination eq 3389
object network DRI_PS99
host 192.168.0.54
object service microsoft_dc
service tcp destination eq 445
object service https448
service tcp destination eq 448
object network mail_server_internal
host 172.16.20.201
object service Acronis_remote
service tcp destination eq 9876
object service Acronis_25001
service tcp destination eq 25001
object service HTTP3000
service tcp destination eq 3000
object network VPNPOOL
subnet 192.168.50.0 255.255.255.0
object-group network PAT-SOURCE-NETWORKS
description Source networks for PAT
network-object 192.168.0.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object object admin_port
service-object object ssl
service-object object tls
service-object object https448
object-group service DM_INLINE_SERVICE_2
service-object object admin_port
service-object object https448
service-object object ssl
service-object object tls
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_3
service-object object admin_port
service-object object https448
service-object object ssl
service-object tcp destination eq smtp
service-object object tls
service-object object Acronis_remote
service-object tcp destination eq www
service-object object Acronis_25001
service-object object microsoft_dc
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object tcp
object-group service DM_INLINE_SERVICE_4
service-object object Acronis_25001
service-object object Acronis_remote
service-object object microsoft_dc
service-object tcp destination eq www
service-object tcp
service-object ip
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any object mail_server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any object mail
access-list Split_Tunnel_List extended permit ip 192.168.0.0 255.255.255.0 any
access-list outside_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.5.0 255.255.255.0
access-list DMZ extended permit object-group DM_INLINE_SERVICE_4 172.16.20.0 255.255.255.0 any
access-list DMZ extended permit object-group DM_INLINE_SERVICE_3 host 172.16.20.201 any
access-list DMZ extended permit object-group DM_INLINE_PROTOCOL_1 172.16.20.0 255.255.255.0 any inactive
access-list DMZ extended deny tcp any any eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
mtu management 1500
ip local pool vpnadrese 192.168.50.1-192.168.50.100 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static LAN-NETWORK LAN-NETWORK destination static VPN-POOL VPN-POOL
!
object network mail_server
nat (DMZ,outside) static x.x.x.179
object network mail
nat (DMZ,outside) static x.x.x.180
access-group outside_access_in in interface outside
access-group DMZ in interface DMZ
route outside 0.0.0.0 0.0.0.0 178.254.133.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record dripolisa
aaa-server DRI protocol ldap
aaa-server DRI (inside) host 192.168.0.20
ldap-base-dn DC=dri,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=dragan urukalo,OU=novisad,OU=sektor2,OU=REVIZIJA,DC=dri,DC=local
server-type microsoft
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
virtual telnet 192.168.1.12
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 195.222.96.223
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.0.14-192.168.0.45 inside
!
dhcpd address 172.16.20.2-172.16.20.150 DMZ
dhcpd dns x.x.x.177 interface DMZ
dhcpd auto_config outside interface DMZ
dhcpd option 6 ip x.x.x.177 interface DMZ
dhcpd enable DMZ
!
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy GroupPolicy_x.x.x.223 internal
group-policy GroupPolicy_x.x.x.223 attributes
vpn-tunnel-protocol ikev1 ikev2
group-policy drivpn internal
group-policy drivpn attributes
dns-server value 192.168.0.20 192.168.0.254
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-network-list value Split_Tunnel_List
default-domain value dri.local
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group drivpn type remote-access
tunnel-group drivpn general-attributes
address-pool vpnadrese
authentication-server-group DRI
default-group-policy drivpn
tunnel-group drivpn ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group x.x.x.223 type ipsec-l2l
tunnel-group x.x.x.223 general-attributes
default-group-policy GroupPolicy_x.x.x.223
tunnel-group x.x.x.223 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect tftp
inspect ip-options
inspect netbios
inspect icmp
inspect http
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:69c651e94663fc570b67e0c4c0dcbae1
: endrunning config asa 5505
Result of the command: "show run"
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password csq7sfr0bQJqMGET encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.5.0 PALATA
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.17 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 10.13.74.33 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
object-group service DM_INLINE_SERVICE_1
service-object ip
service-object tcp
service-object icmp echo
service-object icmp echo-reply
service-object tcp eq domain
service-object tcp eq ldap
service-object tcp eq smtp
object-group service DM_INLINE_SERVICE_2
service-object ip
service-object tcp eq domain
service-object tcp eq www
service-object tcp eq https
service-object tcp eq smtp
object-group service Sharepoint8080 tcp
port-object eq 8080
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any
access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 192.168.0.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list inside_nat0_outbound_1 extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
pager lines 24
logging enable
logging asdm informational
logging mail errors
logging from-address
logging recipient-address level debugging
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound_1
nat (inside) 1 192.168.0.0 255.255.255.0
static (inside,outside) 10.13.74.35 192.168.0.22 netmask 255.255.255.255
static (inside,outside) 10.13.74.34 192.168.0.20 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.13.74.1 1
route inside 0.0.0.0 0.0.0.0 192.168.0.17 tunneled
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication telnet console LOCAL
http server enable
http 10.13.74.0 255.255.255.0 outside
http 192.168.0.0 255.255.255.0 inside
http 10.15.100.0 255.255.255.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
virtual telnet 192.168.0.53
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_2_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 10.15.100.15
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group 10.15.100.15 type ipsec-l2l
tunnel-group 10.15.100.15 ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
!
service-policy global_policy global
smtp-server 173.194.79.109
prompt hostname context
Cryptochecksum:4767b6764cb597f0a7b8b138587d4192
: endThank you
Hello
I have previously edited the my initial response was in fact not necessary since you were actually using full Tunnel
EDIT: Actually just noticed the the VPN client isnt using Split Tunnel. Its Full Tunnel at the moment since it doesnt have the "split-tunnel-policy tunnelspecified"
So you don't really have any of those.
Please mark the question answers and/or assess response
Ask more if necessary
-Jouni
-
Hi guys,.
I have vCenter Orchestrator 4.0.1 installed and works except... I am only able to connect if the user is a member of the group "Admins VMO". If I'm using an account not administrator, I get a message "unauthorized access". I tried the permissions and authorization for the object of various on... no luck
The only way I get users to connect, is if I add them to the group Admins VMO
Help, please
Set the View/Execute permissions for a group of your choice on the element LDAP root in the workflow, it is what gives admin the ability to connect to webviews non - vco and the customer of the vco. If you have actually done this and you are not able to connect with a member of the group, the only thing I can suggest restarts the vCenter Orchestrator Server service.
Please post a screenshot showing your workflow element root selected in the customer of vCO and in the right pane, view the permissions tab and its contents.
-
Hello
In your opinion, what is the best way to implement data access level rights?
Before I used VPD to database 11g. Now, we decided to keep the aggregations in the cube OLAP (AWM 11 g) and I'm looking for the best solution limiting the user access rights to members of special dimension to different levels. For example, we must leave Office Manager to see only its data from team members (and do it dynamically, without having to grant the role of severl hundreds of managers separately), or let product manager see only 3 categories of products.
I am browsing OLAP forum for awhile, most of old son means AW_ATTACH / PERMIT_READ / AUTOGO. Are there other options?There are two mechanisms available to control that can see the data by user: cube or dimension according to the strategies of security and private virtual database (DPV). Each have their own forces. Many organizations use a combination of the two.
Cube security policies allow you to grant access (SELECT, INSERT, UPDATE, DELETE) to a database user or role. You describe what dimension members a user has access. For example, Europe and all descendants. If the security policy is applied to a dimension, that policy is applied on all cubes that use the dimension. If cube security if applied in the context of a policy, the policy is limited to this cube.
Cube security policies:
* Are 'hermetic', because they apply to all access methods (SQL querying the views of dimension and cube, SQL, OLAP_TABLE and CUBE_TABLE, OLAP DML, PL/SQL, queries etc.).
* Are convenient. Apply a policy to a single dimension, and it applies to all cubes. It is very easy to express security policies by selecting the members or the use of hierarchical expressions in Analytic Workspace Manager.
* Are limited to users and roles, so the applicability may be limited to certain use cases.Virtual private database policies are applied to views of dimension, hierarchy and cube. These views using OLAP is not different from any other table or view.
MEV:
* Applies only to the objects on which you apply a policy (for example, dimension, hierarchy, and cube views). If you need to make the hermetic policy, you should stop other access methods. For example, revoke execute on DBMS_AW, etc.
* May take a bit more work to set up, but they offer some additional flexibility because you set the policy with PL/SQL. That's all what you can invent.
* Can be applied beyond the users and roles.The key is that both are quite useful. Learn more about the two and use the feature that best matches your request.
-
need help to set the access rights of a vmware server 2.0.1 on vmware image
Hello!
I have a vmware (running ubuntu server 9.04) image that was created with a vmware server installation varsion 1.0.9. now I decided to upgrade to the host, which means that the host totally changed: new equipment, new OS, new vmware-server-version: 2.0.1
My problem atm is, I may not know, what would be the appropriate access rights (chown/chmod) for this vmware image. during the installation of vmware server 2.0.1 I was asked to specify some 'administrative user' where I took the an im working with Linux itself (lets call it "user").
so, when I copied the old vmware image in the data store (/ var/lib/vmware/VirtualMachines for me), chown-ed the folder including all files init by A, setting chmod to something like 600, the console vmware (web surface) told me that there were several problems with the image and couln can't be started etc. etc. etc...
I played with several rights to the image and the only thing that seemed to help was setting the folder and all files included in 'root' with the command chmod chown '777'... not what I would call 'secured '.
so: how to set the access rights for the virtual machines? I want that they have only minimal rights as possible and especially nothing like root: 777...
My static VM files, as in those who are not dynamically created when the virtual machine starts, are the property of root, root of group with permissions of 711. Root is the user that I have chosen as the admin user when you run vmware - config.pl. My users do not have direct access to this server, so I'm not too worried about the permissions. You can give different rights for different users to different virtual machines, creating roles and their allocation to users/groups. On that, the details are in Chapter 10 of the user guide - http://www.vmware.com/pdf/vmserver2.pdf.
Guy Leech
VMware vExpert 2009
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
The error message was: -.
====================
The page is not redirecting properly
Firefox has detected that the server redirects the request for this address in a way that will never end.
This problem can sometimes be caused by disabling or refusing to accept cookies.
====================
I've been on these groups for years without any problems and all of a sudden happens.
... Graham Newton gn@audio-restoration.com
Graham,
I also had the issue. It seems that it is a problem with cookies. So what I did to solve the problem was to do the following (I use Firefox 30.0 with the add-on to make it look like the old Firefox):
- Go to Options (either with the key or tools-> options)
- Click the Privacy tab
- Click The remove individual Cookies
- I deleted all cookies, but maybe it's not necessary to do what you could just delete cookies from Yahoo to return to Yahoo groups.
- I went back to Yahoo groups and was able to go to my groups.
I hope this helps.
George Worley
-
Why Ctrl + arrow left and combinations of keys Ctrl + right arrow changed?
All versions of Firefox prior to v10, ouCtrl Ctrl + left + right while the cursor was in an editable control would cause the cursor to the beginning of the next or previous word, respectively, as is the standard in practically all the facilities I've seen. Why the developers of FF10 see would violate these standards & cause a lot of time to be wasted to return to the edit & manually repositioning the cursor?
No problem here with these keys in Firefox under Linux 10.0.2.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
Tecra M2: Energy saving - have no access rights
Hello
I am running a Tecra M2 with Windows XP SP2 and I recently installed Toshiba Power Saver as I want to make the most of my battery on a flight that I take. However, when I try to run the Toshiba Power Saver in the Control Panel, I get a window with the following error message:
Cannot be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
I am logged on as administrator, but I still get the same problem. I even re-installed Windows XP, but after having installed all the drivers, I get the same error. I tried to install the version of Win2K of soft, but it gives the same problem.
Any help is appreciated as I want to make the most of my laptop computer power wise.
TIA
Klaus
Hello
I put t know what is happening in your case, but if you are logged in as administrator starting point please power saver utility and go to the CONFIGURATION OPTIONS. Check the CONFIGURATION PROFILES and activate both options here.
Maybe you are looking for
-
How do I save the .csv files
Hello I use 'writing on file measurment' and by defult files are saved as ".lmv". How can I change this to save in ".csv" by default. Thank you!
-
LaserJet print several copies on Windows 8
Regardless of the number of copies printed, I pray, it displays only one at a time. Using Word 2010. I am running Windows 8.1 and the printer is a PCL5 1320.
-
Vista won't start do not and the Startup Repair tool suspended
Hello I just came across some problems with Vista. I initially became a problem with my network card that he was unable to start the driver. I made the mistake of unistalling thinking Vista would be to reinstall it when it restarted. Since then it
-
Hello I want to implement banner Notification in my application. How can I add (or change) symbol of Notification on the banner of my Application?
-
LDAP group does not map synchronization
I have problems of LDAP group synchronization maps for UCS central to allow access for UCS - M connection. They are not properly synchronized.