apply the patches of several products

Similar Questions

• apply the patch error - oraplp10.dll

  I am applying the patch and get the error again... Some files that need to be resettled by the oracle Universal Installer
  used by one or more running services. It contains a list of 30 services. All the oracle services are already shutdown.
  
  When I checked the log file for more details:
  D:\oracle\product\10.2.0\db_3\cfgtoollogs\oui\installActions2010-04-14_10-21-32AM.log
  
  INFO: Exception thrown from action: copyGroupFromJar
  Exception name: IOException2
  Exception string: error writing to the file "D:\oracle\product\10.2.0\db_3\bin\oraplp10.dll". [D:\oracle\product\10.2.0\db_3\bin\oraplp10.dll (the process cannot access the file because it is being used by another process)]
  The exception severity: 2
  WARNING: This stop all product installation and exit the installation program. Are you sure you want to stop the installation and exit?
  INFO: User selected: Yes/OK
  
  INFO: Set to warn the user with options to ignore the attempts of exception handling
  Choice of the user: the user chose to stop to install all components.

  The_Rock wrote:
  100% DONE :)
  Thanks Kamran Agayev Sir.

  A Question Mr President, what is the renamed file oraplp10.dll? Should I rename it to its original name?

  I hope that the new file with the same name is already copied. Just check the folder where it was copied

• How to apply the patch in oracle 12 c

  Hello

  Is there a correct way to apply a patch in oracle 12 c.

  Database is up and running (in open mode / read, write)

  No application is connected to the database

  But it seems that his is not successful.

  [oracle@localhost 19504744] $ opatch apply

  Setup Oracle interim Patch version 12.1.0.1.10

  Copyright (c) 2015, Oracle Corporation.  All rights reserved.

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  Check the environment and performing preliminary controls...

  Skip patch 19504744 list of patches to apply: this patch is not required.

  After ignoring the patches with missing components, there are no patches to apply.

  OPatch Session is complete warning.

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  
  

  cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»

  [December 7, 2015 02:06:59]     Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil

  [December 7, 2015 02:06:59]     YES-67077:

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)

  [December 7, 2015 02:07:01]     Check the environment and performing preliminary controls...

  [December 7, 2015 02:07:01]     Checking for conflicts between the colonies...

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Adapter can go list: 19504744

  [December 7, 2015 02:07:01]     Not need adapter list:

  [December 7, 2015 02:07:01]     List of self-catering maps:

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Intra-conflict control PASSED

  [December 7, 2015 02:07:01]     Checking whether Oracle Home has components required by tasks...

  [December 7, 2015 02:07:01]     Check if the "19504744" patch is a patch of no-op.

  [December 7, 2015 02:07:01]     Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0

  [December 7, 2015 02:07:01]     [oracle.rdbms, 12.1.0.2.0]

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.

  [December 7, 2015 02:07:01]     CheckMissingComp: hash match, re - build SWFs

  [December 7, 2015 02:07:01]     YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [December 7, 2015 02:07:01]     UtilSession: N-apply is.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     The following warnings occurred during execution of OPatch:

  ([7 December 2015 02:07:01] 1) YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  [December 7, 2015 02:07:01]     Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  1. not a correct way to apply the patch

  2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)

  Look in your current patch its not needed

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)

  
  

  Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).

  
  

  Update:

  
  

  Check the environment and performing preliminary controls...

  Jump list of patches to apply 19504744 patch : this patch is not necessary.

  
  Clearly it indicating information
  

  -Pavan Kumar N

• Apply the Patch IE11

  Hello

  I use JDev 11.1.2.4.0 in windows 8.1

  I want to run my ADF application locally my JDeveloper and run in IE11. Here are the steps I followed:

  I closed JDeveloper and weblogic Server embedded

  1-DOWNLOAD patch 18277436 as in https://blogs.Oracle.com/jdeveloperpm/entry/oracle_jdeveloper_and_adf_patches

  2 - this patch has 2 patches (18277436/Yes & 18277436 / his). I opened me read file and I found that I have to use 18277436 / her for 11.1.2.4.0.So JDev, I'll use the patch 18277436 / his

  3 - I opened the folder of his and I follow the steps in the readme file.

  4. I downloaded the OPatch p5912518_111000_GENERIC.zip.

  5. in C:\Oracle\Middleware\jdeveloper I extracted the folder OPatch

  6. I open cmd and write ORACLE_HOME = C:\Oracle\Middleware\jdeveloper

  7. I go to the patch path and then apply the patch as C:\18277436\sa\18277436 > C:\Oracle\Middleware\jdeveloper\OPatch\opatch apply - jdk C:\Oracle\Middleware\jdk160_24

  Citing O Patch 11.1 .0.0.1

  Setup Oracle interim Patch version 11.1.0.0.1

  Copyright (c) 2011, Oracle Corporation.  All rights reserved.

  Oracle home: C:\Oracle\Middleware\jdeveloper

  The Oracle Home Inventory: C:\Oracle\Middleware\jdeveloper\sainventory

  OPatch version: 11.1.0.0.1

  Product information: C:\Oracle\Middleware\jdeveloper\product.xml

  Location of the log file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch2015-06-19_12-29 - 03 PM .log

  History of patch file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch_hiMobyDick.txt

  Fix provisional application '18277436' ApplySession to OH ' C:\Oracle\Middleware\jdeveloper'

  Prior running check...

  Please stop Oracle instances miss this ORACLE_HOME on local system.

  (Oracle Home = "C:\Oracle\Middleware\jdeveloper")

  The local system is ready for the patcher? [y | n]

  There

  The user responded with: Y

  Backup of files and inventory (no self-catering) for the Oracle home

  Backup of files affected by the patch "18277436" for the restoration. It may take a while...

  Backup of files affected by the patch "18277436" for the restoration. It may take some time...

  Patching component oracle.jdeveloper, 11.1.2.4.0...

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-api - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-automation - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-impl - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf.oracle.domain.webapp.war"

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\dvt - faces.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - api .jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - impl.jar '

  ApplySession adding temporary patch '18277436' to the inventory

  Checking for update...

  OK stock check: Patch ID 18277436 is part of the spirit of the inventory of Oracle Homemetadata good h.

  Files check OK: Patch ID 18277436 files are present at Oracle.

  The local system has been fixed, and it can be restarted.

  OPatch succeeded.

  If Opatch is successful.

  8 clear the tmp folder in [MW_HOME] / user_projects/domains / [domain_name] [SERVER NAME] /servers/ /tmp/

  9. I start my JDeveloper using C:\ > C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -own

  10. I run my ADF JDeveloper application the IE11 open to access the application I got "browser not supported message.

  Why I got 'browser unsupported message' y at - it something missing?

  Is there an apply patch 18277436 in JDev 11.1.2.4.0 and run the application in IE11?

  Thank you.

  Try to follow the same steps that you did but set ORACLE_HOME = C:\Oracle\Middleware\oracle_common and extract oracle_common folder instead of the folder jdeveloper OPatch.

  If you get errors while applying the patch in oracle_common try to remove the middleware House and re-JDeveloper Setup again.

• applying the patch 9535311 anf having failures.

  Hi guys,.
  
  You can help...
  
  I connected an SR, but engineers take tym to find a solution.
  Here is the error I get when I apply the patch.
  
  /udd001/app/oraapps/product/11i/appl/FND/11.5.0/bin/FNDLIBR DNF FNDCPBWV & ui_apps SYSADMIN "system administrator" SYSADMIN
  
  
  List of errors encountered:
  .............................................................................
  
  _ 1 _
  Please enter a valid responsibility. The system of liability
  Administrator does not exist or is not active. Check that the good
  short name of the application is specified for your responsibility.
  (ROUTINE = AFPSSC)
  .............................................................................
  
  
  AD worker error:
  The above program failed with error code 1.
  See the AD worker log file or the log file for more details.
  
  
  
  I have check the responsibility and is not dated expiry and its actcive
  
  Thank you

  Salvation;

  Please consult your system administrator has the end date

  For the steps and possible solution please check below thread

  There is no system administrator *.< answered="" by="" hussein="">
  http://KR.forums.Oracle.com/forums/thread.jspa?threadID=918867&TSTART=0&MessageID=3578458 *.< answered="" by="" hussein="">

  Respect of
  HELIOS

• How to apply the Patch

  Dear friends,
  
  My current database is 10.2.0.1.0. I checked my setting compatible file init.
  
  I would ask my patch to upgrade to 10.4.
  
  Its a file exe and when I run I don't know if I should install it in the same folder and the same House. I tried different location House and different but it says that it must be in the current House.
  
  Otherwise, it shows errors awt.dll is not available, written by another process. I did stop my database and stop all the necessary services.
  
  I also tried to use the same location but different host.
  
  Please guide me on how to go about it.
  
  I'm working on Windows Server 2003, Enterprise Edition.
  
  Thank you.
  
  Published by: user645399 on 24 Sep, 2010 09:53

  user645399 wrote:
  If my existing Oracle home is Ora1 and located at c:\oracle\products\db_1, can I install this patch exactly at the same House and the same?

  Yes. In fact, the section that you pasted said to do exactly this.

  You must install it in an existing base of Oracle 10 g Oracle home.

  The reason for which you found the file misuse is probably because you have some software running that uses binary files in the Oracle home. This could be a database, customer, no matter what.

  If you really believe that you have everything off then the next action plan, I would recommend would be to put Windows Services to manual and reboot the server. So try and apply the patch. I've seen this behavior before in a Windows environment.

• The process that you follow to apply the patches.

  I know that you guys wouldn't non-technical questions.
  
  I was asked to create a document that describes the patches apply the entire process (gettinng approval of managers/users) for our RDBMS Oracle (10 g 2) final to actually apply the correction
  
  In a production environment, when a DBA wants to apply a hotfix released by Oracle as PSU, CPU what the process follow the guy. What is the approval process we need to follow?

  Approval process that we follow is:

  1 perform a upgrade of test with a replica of the production environment, test the application and make sure nothing don't breeze - this is the longest stage depending on the complexity of the application
  2. Note the time taken by the process of upgrade, and post-upgrade above and discuss with the approval authority of necessary downtime
  3. Once approved, inform end users (if possible) on the scheduled service break and the estimated downtime and still remember once a few hours before the actual upgrade process

  If there is one bug fix to apply what needs a time out, some of the above steps are ignored - if this bug fix is essential from the point of view of functional and commercial.

• Measures to apply the patch...

  Hello
  I found the steps required for the application of a fix on page 3-2 on doc called "Procedures of Maintenance Oracle Applications".
  During step 7: 'Reply to the AutoPatch guests', the system asks the ORACLE user password. This is the password of the system.. db user account ???
  
  Do I have to run the autoconfig after each patch application, once after you have applied the last of them, or if the Readme of a patch committed to do so... or...?
  
  Note: I use EBS 11.5.10.2
  
  Thank you
  SIM

  SIM,

  Ah... that's why the paragraph "Test a Patch before It application" page 3-5 (the doc I referred in my previous post) it is written:
  ".... In test mode, AutoPatch reads and validates the patch file of the driver, bed product file
  driver files, object modules from the libraries of product (for version checking),
  performs version checking, * and runs the automatic configuration (in test mode) service *. »

  Test mode means that use you 'option = no', it is useful if you want to know exactly what a fix will do before applying the patch.

  Note: 181665.1 - version 11i Adpatch Basics
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=181665.1

  Except for the notes written on this doc, is there something else that I should be careful because I'm going to do my first patch and I do not want to miss...

  Just make sure you take a backup and follow the steps in the Readme of the fix.

  See the following thread, it may be useful.

  measures to apply the 4632932 patch
  measures to apply the 4632932 patch

  Kind regards
  Hussein

• Update Windows shows about 100 updates important to apply. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with? Thank you

  The manufacturer has replaced the HD on my computer laptop 64 bit Windows 7.  Update Windows shows about 100 updates important to apply.  I can't find patches that I had previously applied in the list of applied hotfixes or patches to apply list.  I don't understand why this is.  How would you recommend I do.  I'm afraid to apply the patches to 100 at a time.  Those who would be safer to start with?

  Thank you

  Hello

  I suggest you only begin to install the important updates (recommended) first and later if you want you can install optional updates. All Windows update are safe to install and it is important to install the update and recommended by Microsoft. It keeps your computer safer and your software current to date and if you want Windows to install important updates as they become available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.

  For more information, take a look at the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

• Apply the patches to ACS 5.1

  Hi all

  I hope someone can help with this problem.

  I have an ACS 5.1 with the next load of S/W

  Deploying applications engine Cisco OS version: 1.2
  ADE-OS Build Version: 1.2.0.146
  ADE-OS System Architecture: i386

  Cisco ACS VERSION INFORMATION
  -----------------------------
  Version: 5.1.0.44
  The identifier for the internal version: B.2347

  I downloaded 5-1-0-44 - 3.tar.gpg, 5-1-0-44 - 4.tar.gpg and 5-1-0-44 - 5.tar.gpg to a local directory on GBA, but every time I try to run the upgrade patch GBA fix install 5-1-0-44 - 5.tar.gpg repository_name repository get following error output...

  chmod: cannot access at the "* .sh ': no such file or directory".
  Patch not valid 5-1-0-44-5.tar.gpg'-missing install.sh
  % Error: failed to open / validate the patch

  I have moved the 5-1-0-44 - 5.tar.gpg to a linux machine and tried to dencrypt the file using gpg d 5-1-0-44 - 5.tar.gpg but it invites then pass phrase, I tried a few guesses, but I couldn't decipher.

  So what part of the upgrade process I am missing, or do I have to install some kind of password so that the ACS can properly decrypt files to fix.

  I tried this with the patch 3, 4 and 5.  I need to start pathch 1?

  Thank you

  Cefyn Arch

  Helloz,

  Form where you downloaded the patch. I suggest you download from cisco.comif you download before.

  http://Tools.Cisco.com/Squish/1D47B

  No, you can directly apply the patch 5.
  Correct the command that you run to apply the patch.
  I wish allows you to check a few things

  1 are you using TFTP? If so, then switch to FTP and try again.
  2. prior to apply the hotfix, make sure that you can see the file in the repository.

  Show repository

  If you can see patch 5 under the repository then you're good to go.

  HTH

  Jousset

  ~ Make useful messages rate

• How to apply the patch to power supply in an environment of dataguard

  I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.

  Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.

  In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.

  To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:

  1 reporter on the primary to the standby log shipping.

  2 cancel the MRP on the standby database.

  3. apply the patch of power supply on the standby server. -See the Readme for instructions.

  4. ensure that the standby db is mounted and the earpiece is in place on the standby server.

  5. do not run any script correction on the standby database.

  6. apply the patch of power supply on the principal server.

  7. make sure that your primary database and the listener on the primary server is running.

  8 turn on the primary to the standby log shipping.

  9 start the MRP on the standby database.

  10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.

  Please refer to this

  How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)

  Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao

  HTH

  -Jonathan Rolland

• Strange worker has no reasons when applying the patch 17529626

  Dear all,

  I am applying the patch 17529626 on platform EBS R12.1 Linux X 86-64. So I am facing the following problems:

  1:

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: Yes

  I answer 'Yes' to continue such patch recommended in some other discussions of Oracle.

  2: after spending the step that precedes the adpatch blocks in the following lines:

  IMPOSSIBLE: folder ap_holds_all.xdf worker 1.

  IMPOSSIBLE: folder zx_import_tax_lines_gt.xdf worker 2.

  ATTENTION: Fix the worker failed above the Manager to continue.

  
  

  I checked the logs of the worker, and I got the following:

  1:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  INFO: An additional column LAST_UPDATED_BY exist in the target database

  The AP_HOLDS_ALL table is absent from the LAST_UPDATED_BY column

  WARNING: The missing column is NOT NULL and there is no default to apply

  Add a nullable column with the statement

  Executing statement

  ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Start time for the above statement is kills Sep 20 23:42:21 THIS 2015

  End time for the above statement is kills Sep 20 23:42:21 THIS 2015

  Error in the statement ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 Oct 23:42:21 THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:42:21

  Assignment 2:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  The ZX_IMPORT_TAX_LINES_GT table is missing the column ATTRIBUTE1

  Executing statement

  ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Start time for the above statement is kills Sep 20 23:41:59 THIS 2015

  End time for the above statement is kills Sep 20 23:41:59 THIS 2015

  Error in the ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 23:41:59 Oct THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:41:59

  So I checked the two tables for these columns:

  DESC AP. AP_HOLDS_ALL: LAST_UPDATED_BY NOT NULL Number (15) exists

  DESC ZX. ZX_IMPORT_TAX_LINES_GT: Attribut1 VARCHAR2 (150) exists

  Now, I'm confused and I don't know how to solve this problem, please help?

  In addition, I tried to restart the worker through adctrl, they have been restarted but still runing for a very long time!

  Thank you very much for your help!

  Concerning

  Moussa

  Please check

  Errors in applying the Patch 15966842: R12. AP. B (Doc ID 1535742.1)

  Patch is different but the error is the same

  concerning

  Pravin

• lyingWhen application of a fix via ADOPTION, he failed with the AutoPatch error: you must be in Maintenance Mode to apply the patches.

  Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error

  AutoPatch error:

  You must be in Maintenance Mode to apply the patches.

  You can use the AD Administration utility to set the Maintenance Mode.

  I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.

  How I applied the patch

  source, run fs

  adoption phase = apply patches = 18345006 = no allnodes

  The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.

  Apparently, the maintenance mode error is just a smoke screen

• Apply the patches for EBS R12.2 ORS

  Hi all

  I just finished the basic installation 12.2.0. I want to apply the patch to 12.2.4. Do I need to install the first ORS patches?

  Can you check if this process is correct? Which MOS Doc ID can we find?

  Backup your existing Instance R12.2 upward.

  Connection for the user of the application.

  Copy the patches to $APPL_TOP_NE /... /patch

  CD $ADMIN_SCRIPTS_HOME

  ./adstpall.sh apps/apps

  . < RUN_BASE > / APPS/appl/EBSapps < nom_du_contexte > .env - located the .env APP < nom_du_contexte >

  CD $ADMIN_SCRIPTS_HOME

  ./adadminsrvctl.sh start

  adoption phase = apply patches = < patch_number > /hotpatch = yes

  INSTANTIATION OF OSH

  $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/ssl_conf_FMW.tmp - stat

  $ $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/mod_wl_ohs_conf_FMW.tmp - stat

  $ $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/admin_conf_FMW.tmp - stat

  Perl $FND_TOP/patch/115/bin/txkSetAppsConf.pl $.

  -contextfile = $CONTEXT_FILE.

  -outfile=$INST_TOP/logs/appl/RGF/TXK/temp.txt

  CD $ADMIN_SCRIPTS_HOME

  ./adstrtall.sh

  adoption phase = fs_clone

  Thank you all.

  Hello

  MariaKarpa (MK) wrote:

  Hi all

  I just finished the basic installation 12.2.0. I want to apply the patch to 12.2.4. Do I need to install the first ORS patches?

  Can you check if this process is correct? Which MOS Doc ID can we find?

  You need to install the patches according to the document

  Oracle E-Business Suite Release 12.2.4 Readme (Doc ID 1617458.1)

  Oracle E-Business Suite version 12.2: consolidated list of patches and fixes of technology (Doc ID 1594274.1)

  Applying the last pub and the T2K release update pack for Oracle E-Business Suite Release 12.2 (Doc ID 1617461.1)

  Please use your existing wires, do not open a new

  Thank you

• Apply the patches OBIEE 11 g

  Hi all
  
  Currently we use OBIEE 11.1.1.6.4 someone is 6.4 before patch. Now I need to apply 11.1.1.6.10 patch set. I download all the 6.10 patches.our weblogic server version 10.3.5.0
  Please help how to apply patches to the linux environment and can share any document to apply the patches.
  
  THX,
  ANI

  Make sure you have these configuration paths correctly using command line

  FMW_HOME = your installation directory eg:(/u01/middlewarehome/Oracle_BI1)
  $ FMW_HOME/Oracle_BI1 CD
  Export ORACLE_HOME = $PWD
  export PATH = $ORACLE_HOME/bin: $PATH
  Export JAVA_HOME = $ORACLE_HOME/jdk
  export PATH = $JAVA_HOME/bin: $PATH
  export PATH = $ORACLE_HOME/OPatch: $PATH

  If you have the wrong oracle_home then it will lift these errors

  It may be useful