APX driver problem - trying to install ICS

Similar Questions

• SE - error Code 1327 Invalid Drive Z:\ trying to install Pinnacle video 14

  I downloaded Pinnacle 14 Ultimate video and tried to install it.  The download and decompression of files seems to be ok.  However, when I run the installer, it displays the message Error 1327 Invalid drive Z:\

  The PC is a Dell XPS 800, running Windows 7 64 bit, with an Intel i7, 8 GB ram and 1 TB of HARD drive, I also have our domestic network attached to a Drobo with 3 TB of storage.  The Drobo is considered by the Dell as Z Drive.

  I tried to detach the Drobo from the network, redownloading the package of Pinnacle, bury the Pinnacle on a DVD software, and I still get the same error message.

  Hi GolfChef,

  Welcome back to Microsoft Answers!

  Important: the instructions below are steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  1. Check that the values under HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders use valid drive letters.
  2. If there is no valid drive letters, change them to point to valid readers
  3. Try to install the software and check if that helps.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PSCOSE Inroom C660 - problem trying to install Win 7

  Hello

  I have a problem when trying to install Win7,

  Once I booted and the screen "Windows is loading files", it stuck at "Starting windows" screen even then microsoft logo does not appear.

  I just leave it about 1 hour with the hope for the process to continue, but usless.

  Clean installation of Microsoft DreamSpark-Academic Institutions and with the same source, it worked the last time ago about 1 year (32-bit).

  But now I'm trying to install a version of Win 7 64 bit.
  THX

  EDIT: SYS INFO:
  CPU: Intel i3 M370
  Memory: 4 GB King Max FSFF65F-D8KM9 part number 1xDDR3
  1 x DDR3 2 gb Samsung part number M471B5773CHS-CH9
  Graphics: Intel HD Graphics
  Brand BIOS TOSHIBA Versin 2.0

  Hello

  To be honest, I put t see any reasons for Win 7 64 bit installation is not possible.
  In case you want to install Win 7 on this laptop, you should first check the BIOS settings.

  To go into the BIOS, press F2 during the turn on/off the unit.
  There should be a startup mode option. You can switch between the AHCI mode and compatibility mode. In which case you would use compatibility mode, the HARD disk performance would be slower.
  So make sure the AHCI mode is used.

  Finally, I would recommend checking the installation using a common Microsoft Windows disk.

  By the way: you wrote that the laptop uses 6 GB RAM (1 x 2 GB + 1x4Go)
  In your case I would remove a RAM module upgrade and would like to try to install the Windows operating system using the original configuration.

• Adobe lightroom problem: tried to install this program, run it, and he said automatically adobe lightroom has stopped working

  I tried to install this program, run it and it indicates automatically adobe lightroom has stopped working and I have to close the program. I tried to uninstall and reinstall the program and the same error occurs.

  Thus, it seems that the graphics cards drivers must be updated.

  I suggest you to visit the site of graphics card manufacturer and update the drivers for the graphics card.

• Problem trying to install esxi on HP Proliant DL380 G7 5.1 - don't start of media

  Hello, pretty new VMware and trying to build a test lab while studying the review.  Facing a problem already in step 1.  Hoping for help.

  I downloaded VMware-VMvisor-Installer - 5.1.0 - 799733.x86_64.iso site.  Loaded on a USB key (also tried CD) and tried to boot from it on the server, but not likely to recognize it.  Server has no OS installed and running RAID1.

  I give probably not enough necessary information then let me know what other info I need to be able to help.

  Thank you!

  sk713,

  While using that iso should work I would recommend for your HP Server using the oem version of HP esxi5.1. You can find this iso located here: http://h18004.www1.hp.com/products/servers/software/vmware/esxi-image.html . Using the OEM makes most of the time because all the specific drivers of HP will be preloaded into this version. Also, if your make a USB ISO I would recommend using rufus located here http://rufus.akeo.ie/ to generate your key usb. In addition, stating what is obvious, but you need to make sure that you select boot from usb or DVD when your system starts.

• I get the message error 1327.invalid drive: M:------tries to install a nuance product

  I try to install dragon naturally speaking and I get the message, Error 1327.invalid drive: M:------.

  How can I fix it

  Hello

  You can try these:

  a. log on as an administrator or as a member of the Administrators group.

  b. Click Start, click Control Panel and then click on performance and Maintenance.

  c. click on Administrative Tools, double-click computer management and then click Disk Management in the left pane.

  d. right-click on the CD ROM drive and click change drive letter and paths.

  e. click the button modify and change the drive to K and then click Ok.

  f. click Yes to confirm.

  g. install Dragon Naturally speaking

  See also: http://nuance.custhelp.com/app/answers/detail/a_id/5720

• BOOTMGR is missing, press Ctrl + Alt + Delete while trying to install Windows Vista Home Premium 64 - Bit

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Hey ClockworkOtter

  You can't go from 32 bit to 64 bit

  There must be a clean install

  links below have very good tutorials on a clean install of vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  http://www.winsupersite.com/article/showcase/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista.aspx

  Walter, the time zone traveller

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Win 7 install disk on Satellite L40-18E driver problem

  Hi "to the point im trying to install windows 7 on a Satellite L40-18 and when I boot from the cd, he said: I have no safely remove the storage device."

  When I run Vista as usual and try to install from my computer it says that I don't have hard drives. am so confused please help :-)

  I m also confused with problem described.

  You are using the original installation disk Microsoft Win 7.
  Do you own OS installation or upgrade only?

  Please send us more information.

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• C6350, install error - driver problem?

  Hi all

  RAN into this error while installing drivers for my C6350. I have had this printer for some time, it comes first in the management of problems during installation. Alos tried repeatedly, defraged and tried again, but still does not. I have obviously downloaded the driver several times just in case missing data issues.

  Any help really appreciated, John.

  This text has been in the header of message box:

  «C:\Users\xxxx\AppData\Local\Temp\7zS0935\Setup\... \Setup\hpzprl40.exe"-m...»

  This text was in the box, preced by Red Circle X

  "The system cannot find the file specified."

  Spec sys: Win 7 64 bit Premium / I7 Prc / 12 GB Mem / Avast! AV

  Downloaded from HP, driver: PS_AIO_04_C6300_Net_Full_Win_WW_130_140

  Restarted PC, router and printer before installing the driver, stopped Avast!

  Thanks for the reply to my post, but the suggested actions were not working.

  I clean all previous HP driver and temporary files, downloaded the driver, but when I tried to install I got an error that it could not find a 9diferent file to that stated above in the first post, I looked for the file in question and it's in the file!

  I'm not a novice around the PC, and as I mentioned earlier, this is the first time I ran a question. It probably has something to do with my Win7 OS...

  HP Universal driver, printer can now be used again (connected via a wireless network)

• HP 750 055xt: clean install / desire / network driver problem

  Want to 750-055xt. Bought as a refurb. SSD is small, so I put more in and did a clean install with Windows 7 Professional.

  Internet - network driver problem does not connect and I see that the drivers are missing. I tried searching the site, but I can't find the driver.

  It's not a hardware issue because I can put the other drive and it works fine.

  I am struck an impasse with the search tool. I need to copy the driver on another computer to move.

  All of the suggestions.

  Thank you.

  Hello:

  Page for your model motherboard plug indicates that there is a CG-RTL8151GH-Realtek gigabit ethernet card.

  See if the W7 directly from Realtek driver works - 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Print spooler problems and cannot install printer driver after Windows 7 upgrade (80070706)

  I just upgraded from Vista to Win 7 Ultimate.  Once installation is complete, I tried to update the drivers and install the latest updates.  Everything worked except for HP LaserJet 4 L driver.  As a first step, whenever the driver tried to install it, the print spooler service may stop working, and the driver installation failed with error code 800F0246.  I then removed everything from the spool directory, rebooted and tried again.  This time, the print spooler service has not prevented from working, but the driver still does not work with error code 80070706.

  I can't find the information for this error (80070706) anywhere on the web.  Any help would be appreciated.

  More information: the HP LaserJet 4 L printer is connected via a parallel to a prolific USB docking cable.  Windows recognizes the printer as the IEEE-1284 device, but says it needs driver to work.

  Update: I was able to manually add the 4L driver using the print server properties dialog box, BUT if I try to add a printer after that, I get "the print processor does not exist.  If I try to add a printer without installing the driver, I get ERROR 0 x 00000002.

  Everything is running as an administrator.  It worked perfectly under Vista.

  Thanks for these links, but these proposals did not help nor solve the problems.

  After a long and painful journey through the registry, I determined that this workstation was already installed 3rd party software, called "Pharos".  Apparently, this software was redirecting the default print processors and was clearly not compatible with Windows 7, although the installation of Win 7 never mentioned a problem of compatibility.  Once this software has been removed, and all the remains erased from the registry, there is now no problems with printers or print spooler.

  In the future, it would be useful that Microsoft has actually provided certain types of useful information when these accidents occur.  Cryptic error numbers and unnecessary event log entries did not provide useful clues.

• What is tcauto.exe have encured a problem and needs to close the average? It happned so I was trying to install the tax program h@r Block

  isn't tcauto.exe incurred has a problem and needs to close to average. It happened while I was trying to install the H@r Block tax software

  1. Insert the software CD into the CD drive.
  2. Right click on the desktop icon and select Explorer.
  3. Click the CD-ROM drive.
  4. Choose the file HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe (where XX is the year of the product), and then choose copy.
     The name of the file should State + or + E-file in the name.
  5. Close Windows Explorer.
  6. Right click on the desktop and then click Paste.
  7. Double-click the HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe file (where XX is the year of the product) file.
  8. Follow the instructions in configuration of installation

  http://www.TaxCut.com/customer_support/supportarticle.jsp?type=article&FAQ=0&acid=158&PFID=1&TID=4&STid=10&CID=40&aid=4474§ion=before

• Problem with starting after trying to install XP.

  I have a Samsung NF110 netbook with an external cd drive. The hard drive has two partitions - c: and d:. C: installed Windows 7 and d: was empty. I wanted a machine to dual-boot with Windows 7 and XP in different partitions. I tried to install XP on the d: partition but during installation only choice was installed on the c: partition (replace Windows 7). I decided to do it and then I hope to install Windows 7 on the d: partition later. The installation process copied all files XP from the CD, but when it came to restart it has always tried to boot from the cd and start the implementation process. I tried to remove the cd drive, and then it came with NT invalid Boot.ini detect failed. I tried various suggestions found on forums to fix this. The most popular seems to be to get to the Recovery Console, and then type bootcfg/list and bootcfg /rebuild. When I do bootcfg/list it shows a Microsoft Windows XP Home Edition installed. However after the rest of the instructions for example enter the loading and do/fastdetect identifier does not solve the problem. Someone at - it any other suggestions to correct what I guess is an MBR corrupted. Wouldn't be better to just format the entire hard drive and start from scratch?

  Thanks in advance for any help offered.

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  You must install the oldest OS first, so XP first then win 7. XP doesn't know how to run win 7, so if you install after win 7, you will lose the ability to boot under win 7. A repair of Windows 7 installation can fix.

  install xp and when you do, be sure to create 2 partitions, one for xp and one for win 7

  http://apcmag.com/how_to_dual_boot_windows_xp_and_windows_7_xp_installed_first.htm