Archiver troubleshooting - asking for ideas!

Similar Questions

• Hello, asking for ideas/help for high vi.

  Hello, excuse my rookieness lol.  Just, I acquired my CLAD certification and began to get wet feet.

  With all of your experience, I was wondering what you might think, this is the best way (read simpler) to create a vi that is a simple drop-down menu to launch the other vi who have created.

  I have 6 operating modes which are supplemented by an experienced developer and I would like to be able to call on any of those through a master vi.  I know that it is a question of annoying n00b, but for any help or suggestion would be greatly appreciated.

  I guess you're talking about, you can use these other screws as subVIs in VI Launcher.

  Do you agree with them just appearing as a popup? You want to be accessible at the same time? Do you need information out of the screw after having completed?

  If you don't care that the subVIs after they launched can make an call and Forget using the reference of VI. If you want to wait before the end of the VI, you can call it as a Subvi, and this means that the Launcher will be glued on this call Subvi until you are finished.

  As far as the interface goes, you could just do something simple with a structure of the event and a selection option:

  

• Some programs using windows 10 ask for flash has to be installed, but it is already!

  10% of my programs (e.g. Pandora) ask for the Flash needs to be installed, but the last Flash is already installed. These programs run on Chrome. Technical support for these programs say just move to Chrome. Any ideas?

  It's crazy, but there are separate installers for Flash for Firefox and IE, Chrome, he joined and Edge might as well.

  To see if Firefox has detected a plugin compatible Flash on the system, you can check on the page modules, either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right-hand side, scroll down to the gray at the bottom area and are looking for "Shockwave Flash". You can change it always be 'activate' to 'ask to activate?

  If he is too old to activate, or completely absent, you can get the latest version on this page:

  https://www.Adobe.com/products/flashplayer/distribution3.html

  In the first table, find the row corresponding to "browser plugin", and you can use either the EXE or the MSI installer.

  Or if you want to check first on the disc, it must be found here on the 64-bit versions of Windows for 32-bit applications like Firefox:

  C:\Windows\SysWOW64\Macromed\Flash => NPSWF32_19_0_0_185.dll
  

  Can you get enabled and running?

• Thunderbird, constantly asking for passwords by e-mail

  Thunderbird has worked for years OK but recently decided to ask for passwords of e-mail, and then ask again, several times, even though I told it to remember using pw Manager. When pw is given, he just keeps asking until I have abandon. Receives emails from Gmail, but I can't send Tbird. No problem with gmail itself as I can connect directly and send and receive mail, but then I get a message from gmail on Tbird telling me that I just connected via my browser. All very disappointing.

  most common cause defective or reach products anti antivirus.

  Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

  The other option is that your provider has changed the parameters required to connect.

  Please add the troubleshooting information to your post
  To find troubleshooting information:

  • Open the help (or click Help three-line-icon and select)
  • Choose troubleshooting information
  • Use the copy button in the Clipboard to select them all. Do not check box "include account names!
  • Paste this into your post.

  Please post back with that information and any other questions you may have.

• mail keeps asking for password for download el capitan

  Mail keeps asking for my password since download el capitan. I have not changed the password and it is not a gmail account. I have not installed iCloud. Someone at - it ideas?

  Please mention what password.

• Ask for extra help - tagging?

  There are moments when one knows another poster would be able to solve the problem or at least throw a few more trouble light line when the first shot of options is exhausted

  Is there a way of marking using top displays another the @ function? Or we rely somewhat on the luck for the expert to notice the thread and chime?

  I fully understand the opinion of everyone here is a volunteer and donated their time and expertise - this is not intended to impose on any of their generosity and benevolence but perhaps a little nudge in the sense of "If you're here at some point - could you please take a look at...» »

  Is it still possible?

  Thanks for any idea

  Once you have enough points to reach the living room you can post a thread, ask for help from another Member of salon, assuming that they frequent the area. You can also check the activity of the Member that you are talking about and find a thread that they participate and post here with a link. As you would expect, there is no way to mark anyone.

• Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect.

  Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect. What should I do? I have new Id and worked, but not with my phone.

  I live in Slovakia and I bought this iphone in Florida USA

  Thank you, Maria Nagy

  Any ideas?

• my macbook pro keeps asking for my apple ID whenever I use the cloud. I enter and it asks again so now. No hassle on ipad or phone

  Whenever I open the mail or my macbook icloud application my apple id password. As soon as he entered he asks for it again. No problem with the ipad or iphone. No idea how yo stop it?

  The iCloud system preferences pane, please just uncheck the Mail and check again.

• Apple tv 4th gen unable to buy the movies if to never ask for the password and code value of active access

  Hello

  I noticed that since a few weeks I'm not able to buy a movie more if:

  -Set store account never ask for password

  -Activate restrictions (set a password) and all buy "limited."

  It works with the same configuration perfectly on my Apple TV 1st, 2nd and 3rd generation, where clicking on the buy button you are prompted to enter the password instead of having to enter your iTunes account password every time.

  But on the Apple TV 4th gen, once I click the button to buy, I get the circle of rotation and it keeps just there, never ask the password so that the operation never happens.

  If I disable the restrictions for the purchase of movies, I can buy the movie (do not ask for an access code and password)

  If I put the password on all your purchases, I am also able to buy the film.

  But still, if I set the password to "ask always", then enable password, set 'focused' purchases (so I'm in the best situation: should I get the password dialog box when I'm about to buy anything, rather than the full itunes password) it simply doesn't.

  I tried: record / stop all accounts (not just the store, but also iCloud, gamecenter, home sharing, etc) - nothing

  Also tried to restore the device and set up from scratch: nothing.

  Apple TV 4th gen updated to the latest version of the software (tried to update, said: I'm updating)

  And again, if I try to do the same thing on Apple TV 1st generation, 2nd generation, 3rd generation, they have all THE work. (Click on buy, get the guest password, enter my 4 digits, in fact)

  The thing is that I am convinced that it worked before this nonsense.

  I'm in Spain, and my account is linked to the Spanish bank

  Any ideas?

  I'm afraid that you'll just have to disable restrictions until the problem is resolved.

  If you want to report your experience to Apple, you can send them your feedback here, choose 'Report a problem' in the menu type of feedback.

• Suddenly Mail asks for a password, but it does not accept

  I didn't mail in three days on my desktop computer.  It keeps asking for my password for aol, but will not accept it.  My password has not changed, but it does not accept it.  On all my other devices, the mail comes, and the password is accepted.

  Anyone?

  As is the case with many email providers, AOL may have made some changes at their end. The usual troubleshooting step is to delete this email account > then add it back back

  Let us know - best chance

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• Always ask for help.

  I have asked for help but received none. I have an e machines T6520 in and all of a suddenn I have no audio device. I have no idea where it went and how to get it back. I went to the website of machines e and downloaded audion drivers, then I extracted the file now what I'm doing and that will fix it? Please please some can help me.

  Go here:

  http://support.gateway.com/us/en/EMAC/product/default.aspx?tab=1&modelId=1645

  Download the file and save it to your hard drive.

  Make a new folder somewhere and unzip him compressed file you donwloaded inside.

  Double-click setup.exe to install. Follow the instructions on the screen.

  See you soon,.

  Jerry

• Pavillion g7: my HP Pavillion laptop g7 is asking for an administrator / power on password.

  I have not tried to use my laptop last year and when I turned it on it was asking for an administrator / power on password. I have no idea what could be the password and I don't remember ever asking a when I used the camera regularly. I read on another question to try the password 3 times and get the deactivation of the system code. My system deactivation code is [51677187] and from there I don't know what to do. Help, please!

  @ldbaughman23

  Enter: 44755109

  Kind regards

  DP - K

• Windows Mail: Get a pop-up asking for my username and password

  Original title: "windows mail problem"

  From yesterday I can't open Windows Mail.  I get a pop up asking for my username and password.  I was sure that I had good, but since then I have rebuilt the account and still get the same pop up.  This is what happens in the error message:

  Account: 'pop.att.yahoo.com', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] username/password invalid ', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  I downloaded Windows Live Mail and that no longer works.  I tried to configure Outlook and got the same result.  I have another identity on this computer and it works fine.  I read that Norton and MacAfee can have that effect, but I don't have one or the other.  I just downloaded Microsoft Security Essentials this week and email worked fine up until yesterday.   I contacted ATT, but they do not support Windows Mail.  I need more ideas here.

  From yesterday I can't open Windows Mail.  I get a pop up asking for my username and password.  I was sure that I had good, but since then I have rebuilt the account and still get the same pop up.  This is what happens in the error message:

  Account: 'pop.att.yahoo.com', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] username/password invalid ', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  I downloaded Windows Live Mail and that no longer works.  I tried to configure Outlook and got the same result.  I have another identity on this computer and it works fine.  I read that Norton and MacAfee can have that effect, but I don't have one or the other.  I just downloaded Microsoft Security Essentials this week and email worked fine up until yesterday.   I contacted ATT, but they do not support Windows Mail.  I need more ideas here.

  Check with AT & T, or the Yahoo Server. They have made of your user name and password. Compare them with those that you entered when you first set up the account.
  The rest of the settings of your look ok to me.

  t-4-2

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner