Are the ports on the MacBook Pro MJLT2 usb 3.0 USB or USB - C?

Similar Questions

• My iPhone and iPad are not visible to my Macbook Pro in parachuting, but they are visible to the other... How can I solve this problem?

  How can I fix?  iPhone and iPad are visible to each other in parachute drop but they does not see my Macbook Pro.

  Greetings brsm1990,

  Thank you for using communities Support from Apple!

  I understand that your iOS devices can see each other with the help of parachuting, but your Mac does not see them. To begin troubleshooting, I suggest you read the information in the following article.

  Use AirDrop to send the contents of your Mac - Apple Support

  Tips for sending items

  If you do not see the recipient in the AirDrop window or sheet:

  • Make sure that the two devices have on AirDrop and are less than 30 feet (9 meters) on the other.
  • If you send to an iPhone, iPad or iPod touch:
    • Your Mac must be a 2012 model or newer with OS X Yosemite or later.
    • The iOS device must use iOS 7 or later and have Personal Hotspot disabled in settings > cellular.
  • If you send a Mac:
    • If the receiver Mac uses OS X Mavericks, Cougar or Lion, then open a window AirDrop: choose go > AirDrop in the menu in the Finder bar.
    • If the receiver Mac is a 2012 model or, click "Don't see you looking?" in the drop window or the sharing of the sending of the Mac spreadsheet. Then click on "Search for an older Mac."
    • Know if the Mac has "block all incoming connections" enabled in the security and privacy preferences. A Mac does not receive items using AirDrop if this setting is enabled.
  • If AirDrop on the receiving device is set up to receive points of contacts only, make sure that the two devices are connected to iCloud. Also make sure the associated e-mail address or phone number to your identifier Apple is in the Contacts application on the receiving device.

  

  Release system requirements

  Send items to an iPhone, iPad or iPod touch, or to receive these devices, you need a 2012 model or later Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).

  To send items to another Mac, you must:

  • MacBook Pro (Late 2008) or later, excluding the MacBook Pro (17 inch, late 2008)
  • MacBook Air (late 2010) or later version
  • MacBook (Late 2008) or later, excluding the white MacBook (Late 2008)
  • iMac (early 2009) or later version
  • Mac Mini (mid-2010) or later version
  • Mac Pro (early 2009 with AirPort Extreme card or mid-2010)

  Learn how to identify your model of MacBook, MacBook Pro, MacBook Air, iMac, Mac minior Mac Pro.

  I know you said that your Mac does not see your iOS devices, but your iOS devices sees the Mac?

  Best!

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• PowerMac Pro doesn't recognize the MacBook Pro in target disk mode

  I'm trying to restore a disk from MacBook Pro from a backup, but my PowerMac Pro does not seem to recognize the MacBook Pro in target disk mode.  I have a FireWire 800 cable and adapter to the thunderbolt FireWire 800 port.  Is there something more I should do to get the Mac Pro power to recognize the MacBook Pro in disc mode target like an external hard drive?

  There is no "Power Mac Pro;" are you referring to a Power Mac (which would be less than 11 years), or a Mac Pro? You try to migrate data from the MacBook Pro to another Mac, or vice versa?

• Apple devices will not print not to 6700 Officejet, including the MacBook Pro and iPad

  I'm helping someone to implement their MacBook Pro and iPad to print wirelessly on their Officejet 6700. I have recently set them up with a new Apple Airport Extreme for their router. The printer connects to the wireless network. During the installation process of the printer is fine, that the MacBook can easily see the printer. The appropriate driver is installed. They also have a laptop Windows 7, which prints instanteously and has no problem whatsoever.

  When I try to print from the Mac, nothing prints. I open the print queue and it says 'Printing - a printer' and nothing ever comes of it. When you try to print from the iPad, you can see the printer and I select. However, after saying in print, said only dialog box: 'Connection to the printer' and he never - it just times out.

  Things I've tried:

  • Everything in this article which corresponds to Macs (10.8).
  • Reset the printing on Mac system.
  • Reset the printer to default settings.
  • The definition of the static IP address of the printer through the printer settings.
  • Setting the IP address of the printer via the Airport utility (after changing the automatic printer).
  • Restart the Mac after each attempt to remove the printer and adding again.
  • Using the official HP Officejet 6700 driver.
  • Use the Airprint driver.

  Other info:

  • Successfully, I can ping IP address of the printer from the MacBook Pro.
  • I can easily see the web page of configuration of the printer in the printer settings both by entering the IP address.
  • The printer is only about a month.
  • They bought this printer because the earlier had problems printing from all of their wireless devices. It is with a previous router in their ISP.

  At this point, I'm completely puzzled as to why the printer will print not these Apple devices. We have addressed all the issues that might be causing it: the network, the printer and the MacBook itself. I looked online and can't see any problem with people not being able to print to a wireless printer connected to an Airport Extreme. I saw some problems when the printer is connected via USB to an Airport Extreme, but this isn't our installation program.

  Any help would be greatly appreciated!

  Wow, I must admit, I had to do a lot of research to find something that you have not already tried! Thanks for your efforts so far @derick03 I accept the challenge of helping you get this to work.

  I have a vague feeling that the problem may have something to do with the router settings and to test my theory, I would like to try something for me.

  Please, open the preferences system, printing and scanning, click on the + symbol to add a printer, but this time, instead of the default tab, click the IP tab. Now let's add the printer using HP Jet Direct Protocol instead of the standard Hello.

  

  You can enter the IP address here, choose the HP Jet Direct and then select the printer driver, and then try to print. You will not be able to analyze this way, I just do this for diagnostic purposes. If you can print, it confirms the Hello Protocol is, and you will need to call Apple to make them turn on Hello, multicast and ensure that all the necessary ports are open.

  Not all wireless routers take load Hi or all features of Hello. Hello being the default method for the discovery of printers on a network, you must ensure that your wireless router supports Hello.

• Change of keyboard USB external Apple connected to the Macbook Pro

  Dear ladies and gentlemen,

  I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

  I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

  I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

  Thank you for your help in advance,

  Péter

  System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

  ... then the menu icon before, choose «Show Keyboard Viewer»

  Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

• Suddenly keyboard does not not, always on fans and pressing alt restarts the macbook pro 13 inch mid 2012

  So, I was on my macbook pro when I decided to close it out. Later, when I came back, I opened it and fans began to work hard, that I tried to enter my password, but the keyboard is not responding, so I plugged a keyboard external usb and I have finally started my session, but I noticed an X on my battery indicator and the message "no battery available.

  I have notticed that the ALT key on the MacBook pro keyboard, restarts the computer whenever you press it

  any idea of what disease? Key on the keyboard is not responding, Alt will restart the mac, fans of strong, cold material work, when I plug the charger in light barely there

  I tried disconecting the battery, reset the SMC and PRAM seems impossible due to the alt, restart problem

  Macboock pro 13 inch mid-2012

  SOS

  Have you tried booting in Safe Mode? If you can start check safe mode to see if the problems you described have stopped. If they are stopped, and then restart the computer normally. What happens then?

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you

• Connection of the Macbook Pro to 2 monitors Dell

  According to me, I've looked everywhere and can't seem to find the right adapter to connect my Macbook Pro (mid-2012) to 2 24 Dell monitors | E2416H at work.

  My Macbook Pro:

  OS X El Capitan

  10.11.5 version (15F34)

  15-inch, mid-2012

  Processor 2.6 GHz Intel Core i7

  NVIDIA GeForce GT 650M 1024Mo graphics

  Connectivity to Dell monitors is DP (DisplayPort) or VGA.

  I really appreciate any assistance that can be provided.

  Thank you.

  Reed

  Get two port to display the mini display port cables and plug the ends displayport on the monitors and the ends of mini displayport ports Thunderbolt on the MacBook Pro.

• Problems with getting the MacBook pro bluetooth to detect client devices he already never associated with.

  Hello.

  I am unable to get my Macbook pro to detect devices, that it has never been previously connected.

  The Macbook pro is detectable by the Bluetooth devices, but I don't seem to have an option to be able to detect the client devices.

  My macbook pro gives the possibility to be discoverable - mode client for example, I want to discover clients for example, speakers, headphones.

  My bluetooth speakers or headphones work fine on my Ipad so I know the beat headphones works well.

  The pro macbbook is detectable and I can connect by Ipad or phone for her, so I don't know the bluetooth on the Macbook works fine.

  Once coupled display in the area of discovery - and can be connected to.

  I think, basically, it means that the Macbook pro connects as a client - but I don't see an option to put in Server mode.

  How can I do so that it looks non-paired devices - I use 10.11.5 (15F34) attempts to connect to the Beats headphones.

  I have reset PRAM etc.

  I even tried plugging an external bluetooth USB adapter - this did not provide additional options.

  Concerning

  You have removed the devices you are trying to connect to the MacBook Pro? BT devices may only be connected to one thing at a time.

  Barry

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.

• Cannot connect the macbook pro in normal mode

  Cannot connect the macbook pro in normal mode

  Are you getting errors?

  How do you connect? You use Safe Mode?

  What year/model MacBook Pro you are using and what version os OS X are you running?

• I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

  I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

  Hi sonalnj,

  I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

  According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

  iPhone 6 s Tech Specs
  http://www.Apple.com/iPhone-6s/specs/

  Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

  OS X Lion mountain
  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

  Update of OS X El Capitan
  https://support.Apple.com/en-us/HT201475

  Nice day!

• A 17 in the hard drive won't go in a 15-the macbook pro

  A 17 in the hard drive goes in a 15 to the macbook pro? both are about 6 to 7 years of age.

  There are two main sizes of the reader:

  Rated 3.5 "drives for desktop computers

  Nominal 2.5 "drives for laptops. Long ago, he must also worry about the thickness, but not for these two models.

• You can improve the macbook pro 15 inch 2015 logic board

  I am the proud owner of a macbook pro mid 2015, 15-inch retina display 2.2 Ghz i7 (integrated graphics).

  I was wondering if it is possible to upgrade dedicated to one with the graphics card logic board or is there a compatibility issue?

  I know that the macbook pro with dedicated graphics card is the same size and all that one that I have so I was wondering if the logic boards are the same size.

  I hope this isn't a stupid question.

  Bruno jeanluke says:

  I was wondering if it is possible to upgrade dedicated to one with the graphics card logic board or is there a compatibility issue?

  I'm sorry. After the purchase, upgrade of the internal components is not possible.

  If you wish, you can sell the Mac you have and buy another Mac with the specifications you want.