As a simple router WRT610N

Similar Questions

• How can I connect two router WRT610N wireless via a modem

  My problem is that

  I want to connect a "wrt610n router" to moden directly cable yet and when I conect the two of them everything works fine and ITI gives good internet connection via WLAN

  Modem ip - 192.168.1.1

  first WRT610N router ip - 192.168.1.10

  But, when I tried to plug "second WRT610N router" by "first a router WRT610N" through second lan_cable(cat 5) router no internet connection provide (give)

  second router ip - 192.168.1.5

  so please tell me how can I solve this problem...

  This article may be able to help:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.XML&PID=80&r...

• Nook Color ereader & connectivity problems with router WRT610N

  I recently bought a new Nook color ereader for my wife. As long as a network administrator, I thought that this would be an easy task to configure the ereader to connect with my Linksys WRT610N router on the 2.4 Ghz band. But I'm running problems when connecting. The question seems to have intermittent connection problems where the meals seem to see the wireless network, authenicates, tries to get an IP address, then connects for a short period or removes the signal very quickly while being right on top of the router with the device.

  By the recommendations of various forums of Nook, I had the best luck with the following...

  2.4 Ghz band settings

  SSID: NookNetwork

  Channel width: 20 GHZ

  Standard channel: 9

  SSID Broadcast: enabled

  Security mode: WPA2 Personal

  Encryption: AES

  Passphrase: set out

  Key renewal: 3600

  UPNP: disabled

  RTS: default

  Defragmentation: default

  Tag: default

  However, the problem still resides in an intermittent connection to the wireless network. I also tried various arrangements of the channel to both channels 1, 6 and 11 with my best cponnecting chance to channel 9. I also played with the security and disabled all together and have plugged but always file (will not however run the unsecured network). Also try a tag value of 75, a framework of fragmentation of 2306 and 2307 RTS setting. My computer laptop while run and connect properly.

  I use the latest software updated both on the color of the corner. I am at the end and have searched high and low to get suggestions, and have not yet reached a compatible connection. Please help... Thank you! And my wife thank you in advance! Smiles!

  Mike

  Hi death,

  Thanks again for your comments and your concerns. Really appreciated!

  I took your advice and contacted Barnes & Noble for a new replacement and am waiting for the reception of the new unit as I type. If all goes well, we have reduced the problem and the replacement ends at our misfortunes... smiles!

  I'll let you know...

  Mike

• New Vista computer and router WRT610N

  Just changed the desktop computer on my home network for a 64 bit Vista system. In order to access the router web-based utility I need to run the configuration of the router process? If so, it replaces the existing settings on my router? Is there a file that I need to copy from my old machine that will save existing settings from my router so that I can update the settings after you run the installation procedure?

  Thanks in advance,

  Mike

  It sounds Basic, but have you tried a simple reset?

  Unplug your modem for 15 seconds and plug back in and wait for the lights to light upward.

  Unplug the router for 15 seconds and plug back in and wait for the lights to light upward.

  Restart your computer.

  Try again.

• work connection to router WRT610N dual band?

  Hello

  I recently bought a wrt610n router and I was wondering I see 5g and 2.5 g, but only one is connected to both.

  I have both the value automatically connect.

  one of them is named linksys and another is linksys media.

  I thought that they should both be connected at the same time?

  Am I missing on dual band connection?

  Thank you.

  At one point, you can connect to a single network.

• Help on the portable computer connection on the desktop and router WRT610N

  I just bought a WRT610N and have loaded in my office which is not wireless and connected to my cable modem and the router on the desktop so that I can get the Wi - Fi of my wireless control internal Laptop Dell Insperion 1501.  My laptop shows my network I have install on the desk top and there are 4 bars green connection excellent, but it does NOT connect to the INTERNET.  How can I fix it?    Please help me sooooooonnnnnnnn.   Thank you very much.

  Try this,

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  2.4 GHz wireless settings:

  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... Make sure your wireless connection is st to obtain the IP address automatically.

• Simple router to VPN support - client connection to the database server

  How can I set up a simple VPN using the WAG325N? Is there a step by step guide that doesn't require me to read a book on the VPN to understand each setting? My needs are quite simple: I need to connect a client computer in Windows Server 2003 running Team Foundaion Server - just like allowing a client to connect to SQL Server running in Visual Studio 2008.

  Otherwise, I could buy a new router. However, I have to have the same feature set as my WAG325N and hopefully allow me to back up the existing configuration + restore on the new router. What router you would recommend?

  In reality, the solution has already been provided by Linksys:

  Instructions to set up the VPN between two routers

  It works very well. Problem solved!

• YouTube & router WRT610N

  Hi everyone, [Hi Dr. Nick!]

  Sorry, my teacher of 6th grader always taught me to open with a joke and well... as you can tell I'm not an actor.

  anyway... first time poster, long user date Linksys. Recently bought a Linksys WRT610N wireless router. It is up and working well, or so I think only. All of a sudden I noticed a bit of lag on YouTube. This has never happened before, and now it seems that every video I play is extremely agitated. Not only that, but sometimes I'll click on a video and it says it transfers data in the lower left corner of the screen (in the status bar), but after he allegedly did load the data, nothing happens. The video will not play. But... If I drag the progress a little indicator to the right, the video starts to play; only to be stopped at a party later in the video (due to late I guess) and the video just freezes completely after that. The bright red progress bar that indicates the video is fully charged stops charging. I speak not of the dark red progress bar, but behind it. Check out a video on YouTube and you'll see what I mean.

  BTW is the computer on that happening my computer in the basement, which is connected to the wireless router. I did some research on this forum, but the only information I came across what for my router wireless (WRT610) & YouTube was involving uploading to YouTube. I don't know I have the right settings (but I could be wrong here as I am new to wireless routers). Does anyone have an idea why this is happening?

  Hey guys,.

  I wanted to thank you guys for your help (I like it). I don't think that the Linksys WRT610N is the router wireless for me. I couldn't go beyond freezing on me and the constant decline signals of YouTube videos. I decided to call two friends and ask for their help.

  I asked them to surf on YouTube and I would like to know if they have problems (this was done in real time that I've been waiting). Two of them said that everything was fine. I then gave him another go myself, but who has experienced the same problem. Then I decided to take a trip to Future Shop and bought another router; another brand. It is not a double router broadband, just to let you know.

  I plugged the router exactly in the same way I did the Linksys WRT610N and guess what? The signals are beautiful, YouTube works like a charm, and I'm not being disconnected every two minutes. I'm not denigrating Linksys, because I only got the router wireless for 2 days. But one thing is very clear to me, the WRT610N certainly had some problems with it; mine did at least.

  I guess that dual-band is not as high on my wish list feature is.

  Thanks again for your help guys.

  (Mod Note: under the guidance of the compliance of the directive.)

• Simple routing on X 1000

  Hi all

  my ISP give my little public network IP addresses and United, can someone help me with the monitoring scenario.

  BUT: I don't want to configure port forwarding or similar, I would like to public port of my server on the INTERNET.

  Thanks in advance.

  Alba

  

  CABLE, I mean the label at the back of the X 1000.

  Better compliance

  Alba

• Router WRT610N does not appear in my network places.

  
  
  

• Using a WRT54G as access Wi - Fi point with a gateway WRT610N router

  I just replaced my gateway WRT54G with a WRT610N router and all is well.  However, I would like to know if it is possible for me to use the old WRT54G as a bridge to access point / wireless on a different floor to the catwalk... Here I want the WRT54G connect Wireless as a router to router WRT610N bridge (not the cables on the LAN ports) and then I want to use its LAN ports on the WRT54G to wired local devices rather than use it as a wireless extension. I read several post, but most seem to suggest the wiring between the routers.

  With the Linksys firmware: No. Is not possible. A Linksys wireless router will no longer work as bridge. It connect wireless to other devices. You need to run a cable

  With the 3rd party firmware like dd - wrt or tomato: you can configure the router as a repeater or wireless gateway. Please check the documentation of the 3rd firmware part to see if your router model and version is compatible. Remember, that a bridge or a Repeater with the WRT54G will slow down your entire wireless network.

• Router WNDR3700v2 vulnerability

  So I had a WNDR3700v2 with the latest firmware for the moment and I noticed that there's a vulnerability in it but no updates are made to this. Is it possible to avoid the vulnerability if I uses a wifi password very strong and pass the settings router with disabling remote management, readyshare, dlna, upnp and other things and do the router be just a simple router with a firewall and no fancy features. Why I ask, it's the router was a lot of work after 5 years, which is much longer than the average router these days. If this is not the case, the netgear wndr4300v2 there any known vulnerabilitys which has not been set.

  It is best to keep your router updated to ensure safety.

  Here are the latest release Notes for WNDR3700v2 and WNDR4300v2 for your reference.

  The release notes indicates all the bugs and problems known with the latest firmware.

• Wireless router connected to the provision of internet access no

  I've just moved to a new place and have connected my router (WRT610N) wireless to my switch located in the smart panel in the basement (SE2500). Connect my ultrabook to the wall confirmed that the signal from the switch in the basement is sent up, but if I connect my router making wireless and connect to the wireless router I have no internet access. Someone knows what's going down? WRT610N

  Yes, but you must properly configure the 2nd router.  Wired is the only medium, 2nd router, disable DHCP, set router IP 192.168.1.2, connect you via LAN - LAN.

  Go here for help.

• where can I download the software cd for my router for?

  Hello

  I have the simultaneous Dual-Band Wireless-N Gigabit Router WRT610N

  But since I updated my internet speed my router work collapsed, I tell myself that I must put the cd and make it work, but I lost the cd. from where I can download the software please? I tried google, but found nothing

  Download the manual on the Linksys support site and configure your router via the web interface at http://192.168.1.1/

• Degradation in speed WRT610N

  IT pro with a new router WRT610N - Firmware Version: 2.00.00 B05

  Connection Internet is a cable modem of 30 MB and I have connections wired two gigabit for the WRT610N and two 100 MB wired connections and multiple wireless devices.  I use WPA-2 on both bands and MAC address filtering.  I have NO problem with the wireless, in fact, that it runs better than I expected.

  HOWEVER, my internet connection the router's wireless AND wired connections is deteriorating in the speed of 25-30 MB up to about 5 MB on a daily basis.  If I just restart the WRT610N, back right connection speed shoots up to 30 MB each time - this leads me to believe that the WRT610N is the culprit here.  I don't have any special settings other than a few forwarded ports to my desktop and I don't see any wandering TCP connection when these speed degradations occur.  Even a restart of the computer has no effect.  Apparently, it is in the router.

  I would like any suggestions you all have in this case - as I can hardly believe that I am the only person with these symptoms.  I have been using Linksys and Cisco equipment for many years and have never had a problem.

  Please, let me repeat - this is NOT a problem with my wireless, so don't suggest things like disable MAC filtering and others - this is specific to the overall speed of connection to internet via the WRT610N Wi-wired connections AND.

  Thanks in advance!

  Brian

  Contempt, people... I found the culprit!

  This stupid "Home Network Defender' is apparently ONE by default.

  Problem solved.