ASM Volumes ISCSI thin-set in service in volumes of dirty

Similar Questions

• chkdisk-type of file system is NTFS, the volume is dirty, what it means

  When I turn on my computer, I see the following: file system to check on C: the type of the file system is NTFS, the volume is dirty.  What does that mean?

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not be deleted, you could tell XP to check everything just do not.

  If the starting XP detects the volume is dirty, it will automatically run the disk with error correction (chkdsk/p) check and try to fix the problems detected.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

  This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

  You also won't solve this problem by editing your registry database - not where is the problem.

  Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

  If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

  If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.  If your hard drive fails, you may never be able to clear the dirty bit, in this case, you can also say XP never check the afflicted volume dirty bit.

  Saying XP not to check the bit of impurity on a volume would be risky behavior because there would always be some kind of problem with your hard drive.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do the chkdsk command yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Date: 04/08/2010
  Time: 11:25:57
  Description:
  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  28017948 KB in 100571 files.
  56540 Ko 10556 index.
  0 KB in bad sectors.
  236440 KB in use by the system.
  65536 KB occupied by the log file.
  10759120 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  2689780 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

  If for some reason chkdsk will not erase the dirty, you say XP never check the bit of impurity of a player, but that will not set your fault of potentially hard drive, or he could be the player just needs have chkdsk to run on it for some other recoverable error condition.

  A simple power interruption is something that could result in a disc was marked as dirty.

  The event log is where you need to look to see what to do about it.

• copy files from my C drive to my external drive error E 0x800718ac3: the volume is dirty?

  Original title: can anyone help with this problem error 0x800718ac3: the volume is dirty?

  I am trying to copy files from my C drive to my external drive E using the operation drag and drop method. That's what happens "error 0x800718ac3: the volume is dirty" can you help me?

  Hello

  1. What is the full error message?

  2. what operating system is installed on the computer?

  3 did you changes to the computer before the show?

  4. What are the names of files and the exact location of the files you are trying to copy?

  Method 1:   Format the external drive of E and see if that helps.

  Reference:

  Formatting disks and drives: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Format deletes the data on the disk. Be sure to back up data before the format.

    

  Method 2: You can check the external E drive to find errors.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Reference:

  Check a drive for errors:

   http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

• Setting up service DB in the OEM Enterprise Manager repository

  In my OEM environment, I have only one console of SGD connection to a database of the RAC 2 nodes (let's call it OEMDB).

  I had installed the PB straight out of the box, so it has a default service and nothing else.  See, for example, my earphone output:

  [grid@prod-oem-db-02 ~] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production on November 3, 2015 11:20:16

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/grid/diag/tnslsnr/OEM-DB-02/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.152.122.21) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.152.122.121) (PORT = 1521)))

  Summary of services...

  Service 'OEMDB.domain.com' has 1 instance (s).

  'OEMDB2' instance, State LOAN, has 1 operation for this service...

  Service 'OEMDBXDB.domain.com' has 1 instance (s).

  'OEMDB2' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  .. the 12cR5 of OEM is essentially a run on weblogic 11g, weblogic application then can I set up a separate database for OEM service to connect to?

  I think so:

  srvctl add service d oemdb s oemdb_svc.domain.com - r oemdb1, oemdb2 base Pei EI select w 120 - z - 3 m base

  srvctl config service d oemdb s oemdb_svc.lululemoninternal.com

  srvctl status service d oemdb s oemdb_svc.lululemoninternal.com

  Oemdb_svc.domain.com service is running on the instance (s) oemdb1, oemdb2

  srvctl start service d oemdb s oemdb_svc.lululemoninternal.com

  .. which would make possible services to MOVE when I do a scheduled interruption (ie. patch home grid/Db).

  
  

  srvctl move service d oemdb s oemdb_svc.domain.com-i oemdb1 t oemdb2

  Does make sense?  should I do something different which is weblogic specific (ie. FAN or using Hellnation event management?) for higher availability of the console of the WHO? What is everyone doing with their OEM installs?

  While small HA test was done with a single SGD, this should theoretically be good.   Documentation of DR encourages the use of a service that are toggled elementary school standby and shows how to configure the SGD to talk about this service, this could help http://docs.oracle.com/cd/E24628_01/install.121/e24089/ha_disaster.htm#EMADV13342.

  One thing to be careful of is that you don't finish restrict connections to a node in normal operations.   You want to be able to use the RAC instances everything also.   OEM will try again on its own 3 times before a failure, then it should reconnect to the instance available, and users will need to connect even more unlikely, but it would reduce down time, I'm sure.  Would love to hear how it goes.

  For SGD HA, without a 2nd WHO there is not a lot you can do.  We encourage anyone in need of HA to have a load balancer and a 2nd SGD.

• not able to set a service profile

  Guy

  I have a service profile that has first 6 cards, 10 hba and a boot from the local disk and then cd and then lan order

  When I try and attribute this to an M3 B200 or B420 (both have local disks), then I get the error "there not enough resources overall, server unavailable."

  When I change the strategy of start of service policy to just boot from the cd / dvd, then I can assign it very well

  If I create a new strategy of starting with the local disc etc then that also include property too

  This could be the cause?

  Note: I corrected that the SP from the template, per just the separation he rebinding and then apply and it worked well - it is exepcted behavior?

  What operating system?

  Please check the interoperability matrix

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  to check that M81KR is still supported!

  I can't find B200-M3 and M81KR in

  http://www.Cisco.com/c/dam/en/us/TD/docs/unified_computing/UCS/interoper...

• update_docinfo - how to change you the setting of service required

  Using Content Server 10 gR 3. I have a site that I want to change everything in a different dDocAccount. I can get the documents using get_search_results using RIDC, that part was easy. I can also loop through the result set and display the information, still fairly simple.
  
  I want to update dDocAccount with another value, but it's a required field? Is there another way to do it by programming?
  
  Thank you, Ken

  you have to do this in the code? The easiest way is an archiver export/import using map to change the dDocAccount.

  Alosso make sure that this change alters the weblayout URL so you must check that your site links is not going to be broken by the present.

  Tim

• How to set the service Navigation bar icon

  Hi all

  I use jdev 11.1.2.4.0

  I have created an application which have two features my question is, how put icon on Navigation bar for these features?

  I created a folder public html-> resources-> images (where there are images of icons)

  but when I go to put the Navigation icon by using the Browse button is not shown my file.

  Thank you

  Manish

  Sorry my mistake...

  I was clicking on the "Lifecycle event listener" icon just above the Navigation button icon browse by mistake.

  Thank you for helping me.

• Error 0x80071AC3: the operation is not successful because the volume is dirty

  I have just reformatted my hard drive... 500 GB of Buffalo
  but after that, I tried to move files on the hard drive and I got the error code.
  How can I solve this problem?

  Hi Izzat Emir,

  I suggest you perform a check disk (Chkdsk) and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: When running Chkdsk on the drive if bad sectors are found on the hard disk, repairing this sector if all available data on this sector can be lost.

• How to shrink thin comments on VMFS5? or change the block size?

  Hi all, I'll try to find a way to reduce invited bloating thin-set in service in an environment VMFS5 all.

  We went from 4.1 to 5.1 and then also vmotioned storage all our newly created vm VMFS5 volumes before you delete the old VMFS3 volumes.  During this operation, everyone has forgotten that one of our volumes has been intentionally assigned to a block size of differnet than all the others for the purpose of narrowing of the guests who had swelled upward for some reason any.  Now, we have no way to create something other than a volume of 1 MB block size which prevents us from doing the cleaning routine.  Is there an alternative way to shrink a guest who does not put offline?

  For those who do not know the procedure that I describe, here's how it works:

  You have a 100 GB comments that has only 10 GB of actual data in it, but because of something after bad temporary files, cleaning up old data, etc., that 100 GB had been used at a point of real files but is now only 10 GB in use. You want to recover which is now 90 concerts waste of space because your thin provisioned VMDK is sitting there at 100 GB in size.  With VMFS3, you could create a volume with a block size that was different from that of the volume on which the guest is currently living.   In our environment were all our 1 MB LUN but one that we kept to 2 MB just for that purpose.   When we were getting a little low on space and found guests such as the one in question, we would run a simple command to write zeros to the entire free space:

  Cat/dev/zero > bigfile; RM f bigfile

  Then all you have to do is storage vMotion the guest at the volume of 2 MB and return to its normal domestic and suddenly the VMDK's 100 GB up to 10 GB, all with no impact on the guest.  Without support for the creation of a file system with a different block size in VMFS5, now I'm not aware of a way to reclaim this space in a way that does not require an interruption of the guest.

  You can select the VMFS version when you create a new data store. With selected VMFS3, you will be able to specify the desired size of the block.

  André

• VMs migration from one to another on ESXi 5.1 data store (free license)

  I'm under ESXi in my lab (for the Cisco voice servers and a few Windows virtual machines). Virtual machines are on a datastore iSCSI hosted by a Netgear ReadyNAS Pro Business. Due to major problems with iSCSI on the ReadyNAS platform and the inability of Netgear to resolve problems (blocking NAS requiring a hard reset), I decided to buy a QNAP TS - 569 L and use it to host my ESXi data store. Now, I'm migrating my VMs from the iSCSI data store hosted on the ReadyNAS to the iSCSI data store hosted by QNAP.

  My VMs are supplied thin, and I want to preserve thin provisioning after migration. The data store Navigator ESXi can move (or copy) machines virtual data to another store, but thin-set in service virtual machines become thick-set service once they have been moved (or copied). Somebody advised Veeam to that end, I've installed and configured. Unfortunately, Veeam-error with the message that the current license does not have the migration of virtual machines from a data store to another. Just today, I learned that he must have at least the ESXi Essentials ($500) license to allow this type of migration of Veeam.

  I also tried OVFTool (the MMware command line utility), using the following syntax:

  . / ovftool - ds QNAP-iSCSI - dm = vi thin: / / vi [email protected]/CUCM-Pub: / / [email protected]

  where:

  QNAP-iSCSI is the name of the data store on the QNAP

  192.168.200.10 is the IP address of my box of ESXi that is connected to two data stores iSCSI (the one organized by the ReadyNAS and the other by the QNAP).

  CUCM-Pub is the name of the virtual machine on the ReadyNAS iSCSI data store I'm migrating to the QNAP iSCSI data store.

  However, I get the following error message:

  Error: Unexpected Option: vi: / / [email protected]/CUCM-Pub

  This is probably due to the same issue - free ESXi license does not allow this type of VM migration. So, what are my options with free ESXi license? I'm not willing to pay $500 for the license of the essential at this stage.

  Thank you!

  A few options, I can think of are:

  • export to the FVO and re - import
  • use VM explore Trilead and backup/restore virtual machines
  • Use the vmkfstools command to copy the virtual disks

  André

• Unable to connect the existing thick disks in VM

  Hello

  I am trying to establish a connection between a series of existing virtual disks and some virtual machine. So far, I was able to connect to all my discs thin-set in service without any problem with the following line:

  $targetVM | New-harddisk - DiskPath ($disk. File name)

  However, it seems that this command does not always work when it comes to thick-set disks in service, resulting in the following error message:

  http://PUU.sh/9xBs9/a73fd64b20.PNG

  I'm trying to get a work around for thick discs, but I'm out of ideas.

  Thanks in advance.

  Take a look on Re: adding copied the hard disk (VMDK) to a virtual machine

• ESXi 5 storage DRS

  We are implementing the storage for a two DRS vSphere hosts 5 (HP Image 5.0.0 623860). It connects to an MSA of CF P2000. To save space, we were thin-provisoning the OS C: VMDK. Research indicates that there may be problems with space reclaimation. Are there problems with VMWare, recovery of space on thin virtual machines? DRS will move the vms correctly if they are thin and recover the space that has been used? Are there any pitfalls to know (in addition to the surveillance of space and setting alarms)?

  Thank you very much in advance for any help.

  Well think of provisioning is officially supported, it does not actually - DRS for storage was never designed for VMDK thin-set in service.

  It is trivial to reproduce:

  1. create a 10 GB data store and put a thin-provisioned 20 GB on this prompt.  You'll see it works.  Remove comments

  2 create a cluster DRS from storage and put the same data store in it.  Try to create thin-provisioned comments again and you will see that it fails.

  It is documented in http://kb.vmware.com/kb/2017605

  If the total size of the fully allocated space does not exceed the size of the data store, you can only thin-provision guests.  Why you would be thin provision in this situation is beyond me.

  This restriction also if you deduplication of data warehouses.  DTS is not actually consider the free space of data warehouses - it looks like the sum of the size put into service of the VMDK compared to the size of the data warehouse.

• Reflections on "Extensible" storage (local, non - SAN) in ESXi 5

  I'm looking for advice/thoughts on this kind of the storage configuration I should consider small deployment of virtual machines.  I'll try to give some general advice and what kinds of compromises and limits, I work with.

  • No SAN: all storage is local.  Right now, I'm working with a couple of servers Cisco UCS, with anywhere from ~ 300 SSD ~ 4 TB of SATA storage drives.  New: all the disks are local, a San is not in the scope/estimates for this.  Willing to accept that this is not optimal but also need to do the best I can here.
  • Operating systems are for the most part win2008, win7, linux.  Maybe others, but these are dominant.
  • Essential condition is to be able to "push" files over time systems.
    • We know that * some * of these servers will grow considerably in their storage needs.  Unfortunately, we do not know who is not possible to pre-configure the large disk on each of them from the outset.

  So I have a few questions of high level... some of them are probably basic/stupid, and for that I apologize.  My background is heavy network, PC/server systems that are quite heavy, but very light on storage.

  • How effective is thin provisioning?  If my physical hard drive, is that just an array of RAID5 2 TB shared 20 VM... is possible/reasonable just configure each virtual machine with a disc of 2 TB thin-set in service, and then control the real storage because it develops over time?
  • Assuming that my RAID controller supports adding online records in the table, it's a reasonable thing to consider?  I * am * in a position where take down physical hosts for maintenance is not just a deal, so if I can add more disks in the array later she is great OK if it takes a couple hours of time offline.  I am trying to understand if the following workflow is possible, and if possible is considered reasoanbly safe?
  • Suppose a host with 4x500G than SATA drives in a RAID5 array, it's a large store of data single VMFS where everything lives...  On this host, we have a number of linux VMs each with a small disc of BONE and a larger data drive (let's call it 600GO).  At some point, the vmfs data store is close to full, and I want to expand it... What are my options here?
    • I can do something like this:
  1. Turn off the VMs, shut down the server.  (it's OK...)
  2. Add additional physical disks on the machine and push the matrix RAID controller level (I realize that this might take a while)
  3. Start, expand the vmfs data store in ESXI (is it possible?  If so, how?)
  4. increase the size of the disk assigned to the greedy VM in storage in ESXi
  5. Start the virtual machine, extend the partition, and then push the file system (I know how to Linux, is it feasible in windows?)

  anyway... it's probably more enough questions to get started.  I appreciate some advice/ideas that people might have.

  To monitor the growth of the VMFS data and store what I understand, you want an automatic transmission incase a threshold defined by you exceed you must first configure the IP address of the smtp server of vCenter parameters. After that, go to the alarm at the level of the data center and to go in the store of data use alarm properties reports tab, select Add and sets the e-mail address of your part there.

  For your reference

  http://www.vmadmin.co.UK/VMware/36-VirtualCenter/117-alarmsemailalerts

• Where is the alarm of overuse datastore disk?

  I read on the allocation of storage of discs thin-set monitoring service.

  Some articles refer to an alarm that warns of overuse of disk % age data store.

  However I don't find in vCenter Server... I looked in the alarms at several different levels and areas, including the storage of data.

  Should I manually create this alarm?

  Is it hidden somewhere?

  What are the recommended settings?

  It is a 4.1 ESX vCenter Server 4.1...

  Thank you, Tom

  relaxation in question may be added into the existing alarm 'use of data to drive store.  Since we don't thin available, I can't give you a use case, but the recommendations contained in the article would be a good starting point.