Aspire 7750G cannot recognize blank DVD + rw

Similar Questions

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

• DVD burner does not recognize blank DVD

  I had a TOSHIBA laptop since April, and since I got it, I have not discovered how to burn DVDs on this topic.

  I can watch DVDs and I can burn CDs, but if I insert a blank DVD, the laptop seems to recognize it as a CD.

  The reader certainly said DVD + RW rewritable, so do I haveto format the disk or something?

  Any help would be great

  see you soon,

  Martin

  Hello

  Before that you want to use on media DVD - RW try to format it before you want to burn files. If you have a problem please send us the description of the model. In this case, it is possible to find more information on the material of the unit.

• DVD burner does not recognize blank DVDs, but will recognize blank CD?

  I read through several similar messages, but none seem to have a solution to my problem.  I'm NOT very technically savvy, so this is as much I know:

  I have a Dimension E310

  It was supposed to come with a cd burner and a dvd burner combo.

  The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed

  I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file.  In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.

  As I said, I'm not the person most computer savvy in the world.  I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give.  Thank you in advance.

  
  

• CD/DVD of R2412 A30 player will only recognize blank DVDs

  I have a Toshiba Satellite A30 with a reader of CD/DVD SD-R2412. The drive will read and play pre-recorded DVDs. When I try to record a DVD, the drive will not read a blank DVD disc and I can hear the reading "head hunting". I have tried DVD-R "up to 4 X' and X 1-8' with the same result. The problem exists with different burning utilities including Nero. The drive Burns CD OK, but on occasions, I get an error (SC/SQ = 04/07 drive) through several CD burning. Any ideas? I searched the forums and I found no similar problems posted

  Hello

  If your drive is the model you are saying that this is the case, then it does not support writing to DVD media. Check here:
  http://www.Toshiba-Europe.com/storage/index.asp?page=pft&NAV=ISH_PRS

  BR

  Tom

• DVD player does not recognize blank DVDs.

  I think that my drive can write to DVDs, but it doesn't even recognize empty (when I go into my computer after burst in, nothing doesn't appear). The disc seems to turn for a few seconds, then stops. He can read the previously empty DVD that had something serious on it by someone else. Research online I found that the problem is very common.
  In the properties of the drive, it says disc SAMSUNG HD160JJ/P and HL-DT-ST DVDROM GDRH10N CD dvd/drive under hardware. I'm pretty sure he can write, but I could be wrong.
  Thank you in advance, I would really like to do something with all my blank CD/DVDs.

  This part of the drive name indicates that your drive is read-only, and cannot write DVD:

  HL-DT-ST DVD-ROM GDRH10N

  If you want to write DVDs, you will need to purchase an optical drive DVD - RW. MS - MVP - Elephant Boy computers - don't panic!

• Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

  My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
  The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

  He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

  Someone to help they could offer cause I'm running out of space and I really want to delete my files.

  Thank you

  Hello

  It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

  Another clue;
  Have you tried to delete the upper and lower filter registry entries?
  Try it. Sometimes such procedure can simply bring the reader to life.

  The detailed procedure and description has been published here in the article Microsoft Knowledge base:
  http://support.Microsoft.com/kb/314060/en-us/

  Good luck

• Windows cannot recognize the dvd burner

  If I'm not mistaken I have not had any problems burning dvd last time I used the dvd windows burner

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Reader SuperDrive does not recognize blank DVD

  Have recently upgraded to El Capitan. Since then, I tried to export photos on the drive to put in stock and my DVD burner in my iMac 12.1 will recognize is no longer the DVD when entered into the burner. What is happening now is that the DVD is sitting there for a few moments and then is ejected. It's almost as if the DVD recorder is headed south. Don't know what to do from here, because it reads the CD and DVD normally and also formats and burn the CD. Just DVDs. and I have tried 1/2 dozen of them does not.

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  and the NVRAM How to reset NVRAM on your Mac - Apple Support

  Try a different brand of DVD.

  But as the CDs and DVDs use different lasers inside the car it is not uncommon for a failure and the other to work again.

• Using Win XP pro SP3, DVD RW no longer recognizes blank DVDs

  On 'My Computer', the 'DVD RW drive' changes 'CD player' when a DVD is inserted... so it will not recognize it is writable.

  This happens both on the internal Philips DVD RW drive on my Dell 5150 and with my external HP dvd writer dvd300e

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• DVD - RW no longer recognizes blank DVD media

  My DVD - RW Phillips will burn on a CD - R, but will not burn on DVD.  Also it will not read the CD - R or DVD - R most recent, I was able to do a year ago.  When I insert a blank disc and try to burn a DVD (it will burn to CD - r), I keep getting error messages that there is no disc in the drive. I checked the Device Manager and it says that the device is functioning properly and I checked for updated drivers, but he said there was no update needed.

  Also, my Sony CD - R will read CD - R, but not burn them more.  DVD problem is recent, the problem of CD - R has been around for some time, but I said just using the DVD burner to burn my CD - r instead.

  Here are my computer specs:

  Dimension 9100
  Intell 4 CPU 3 GHz

  Processor 2.92

  512 MB OF RAM

  Windows XP Professional version 5.1.2600

  CD-ROM/DVD-rom-Philips DVD +-RW DVD8701

  CD - Sony CD - RW CRX217E (it only reads, does not burn)

  (drivers both show up to 5.1.2535)

  I use them to save the jpg photos.  When doing so, I just use the windows provided "highlight, right-click - Copy to 'E', copy disk" implemented.  Very easy and (usually) simple and reliable.

  Any help is greatly appreciated.

  
  

• Satellite A30 CDRW DVDRW (Mat * one) drive cannot recognize any dvd

  Hello!
  I am owner of a Satellite A30-303 with an optical drive MAST * A UJ811 (CD-RW-DVD-RW).
  Everything works perfectly until last week the player ceased to play any DVD. Appears in an error message saying that there is a problem with E/S. CDs are recognized without problems however.
  I tried to find any updated drivers for the DVD driver but I just could not.
  Please someone have an idea of what this might be and how to solve?
  Thank you!!
  Alex

  Hello

  On this path it is always not simply to say what may be the problem. As written littco check if there is some virus or any kind of malware. It is also possible that there is a technical problem and the reader can not calibrate on the right track.

  I put really know what you mean with E/S, but you can try to remove the device from Device Manager, and then restart the device. The last thing you can try is to reinstall the unit using the recovery CD. On this way, the unit will be absolutely clean. If the problem persists, obviously there is a malfunction and the drive needs to be replaced.

  By the way; have the same opinion as littco.

  Good bye

• Why do a DVD/CD-RW-ROM does not recognize blank DVD - RW disc?

  I have a DVD/CD-RW Drive SOHC-5235K who can born CD without any problem, but when I put a DVD - RW to burn a large file, the system and no matter which burning application that I use ask me all the time to introduce a recordable in the drive disc. I applied all the patches that are available without success. The file I want to burn requires between 4 and 6 CD ordinary, while I only need a DVD to copy. I've removed the filters in the registry, ran all patches automatic, verified that the drive appears in the system as it is recordable, updated the driver. Is there anything else I can try? Thanks in advance for any help.

  Hello

  Internet research indicates that your device does only support writing CD not DVD. This is a combo DVD-ROM and CD - RW.

  Tricky

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.