Aspire E1-531 "no Webcam device found". Windows 8

Similar Questions

• Printers with/without wire: "printer not found," "Can't find the printer," 'no devices found' (Windows 10)

  If you receive one of the following error messages, and your printer is connected to your computer via a wired or wireless network, see the troubleshooting steps in the following doc: printer not found during Network Driver Setup (Windows).

  • Printer not found
  • Cannot find the printer
  • No devices found
  • Your printer is not found on your wireless network

  The solutions include:

  Step 1: Restart the computer, printer and router

  Step 2: Check the status of network and printer connection

  Step 3: Manually connect the printer to your network (only for wireless connections)

  Step 4: Run the HP Print and Scan Doctor

  Step 5: Temporarily disable the firewall on the computer software

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• WINDOWS MEDIA PLAYER, "PLAY TO" - NO DEVICE FOUND MEDIA.

  THE WEEK LAST I WAS ABLE TO PLAY MY MUSIC THROUGH THE HOPPER PLATE USING THE BOX OF "PLAY TO"-IT WOULD AUTOMATICLY HOPPER THEN PUT HIGHLIGHT AND PLAY WITHOUT PROBLEM. TODAY, HE SAYS "NO DEVICE FOUND MEDIA." IF I LOOK IN CONTROL PANEL - OPTIONS OF DISSEMINATION OF MEDEA - IT SHOWS THAT THE HOPPER IS ALLOWED. HOW CAN I PLAY? UNDER SREAMING, I CHECKED AUTOMATICALLY ALLOW DEVICES TO PLAY.                 THANKS FOR YOUR COMMENTS!

  First of all, you should have windows on two machines running media player and if this is not enough to make your device appear in the Play menu, check again entry in the menu of the WMP Stream > "allow control remotely of my player...". "the machine that you want to make like Play-device and allow.

  I just did so last night successfully. As soon as I had to run WMP, I could have on the other machine under Play submenu of the WMP.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Aspire V5 - 132 - "The OS not found"?

  Aspire V5 - 132 - "The OS not found"?

  the operating system installed?

  If it's windows 8.x

  I suggest you to rebuild the BCD (Boot Configuration data) from command line and check if that helps.

  1 insert the Windows 8.x installation/recovery media and start the computer using the disc.
  If you do not have an installation/restore media, I suggest you download windows enterprise trial edition 8.1:
  http://www.Microsoft.com/en-us/evalcenter/evaluate-Windows-8-1-Enterprise
  You must burn the iso file downloaded to a bootable DVD or USB media

  Note: You will need to consult the computer manual on how to set the CD/DVD or USB drive as the first boot device in the BIOS.

  2. Once you start using the disk installation of Windows on the Windows 8.x installation window, click on repair your computer.

  3. click on troubleshooting and advanced options. First thing you can try is the auto repair. If it does not help, go to the system restore. If it works fine, and then create a system restore point so that the next time that you are having problems you can always restore the computer to the recent system restore point created.

  4. If this does not help, and then select command prompt. Enter the following commands to four in the command prompt.

  Bootrec /fixmbr
  Bootrec /fixboot
  Bootrec /scanos
  Bootrec /rebuildbcd

  Once the order is complete, restart the computer.

• Built in webcam not found on the computer.

  Hi, back for a while that I had to have it replaced my computer screen. After that it has been replaced, my webcam not working not. He said that there is no webcam. Before that the screen had to be replaced, it works beautifully. What could be the problem and how to fix this? Thank you for your help.

  Hi Randalynf,

  Please answer a few questions to refine the question.

  1. What is the brand and model of the computer?

  2. When you say "screen is replaced", hear you screen has replaced for a new one? What was the exact problem with the monitor?

  3. what happens when you try to access with the Webcam software that came with the computer?

  This problem normally occurs when there is no problem with the driver for the Webcam device software.

  I suggest you follow the steps below to see if that helps.

  Method 1:
  

  Step 1: Find material webcam

  Take a quick moment to visually inspect the top of the screen of your computer. Look closely, you should see a small lens at the top in the Center, if your computer is equipped with a webcam. Some models do not come with a webcam and the area where the webcam would normally be resident is replaced by a small plastic cap.
  Often, there are small holes near the top center of your screen. These holes are for the microphone or other sensors and do not contain any webcam.
  • If your computer lacks a built-in webcam, you must use an external USB webcam.
  • If your computer is equipped with a built-in webcam and you can't use it, go to step 2

  Step 2: Find and use the Webcam software that came with your computer

  Try to access the webcam that is preinstalled on your computer.

  If you can't find and open the webcam for your computer software, then go to the next step.
  If you have found the software of the webcam and it opens and you see a picture, then finished. Your webcam works.
  If you found webcam software and it opens, but you can't see the video in the main display window, restart the computer and try again.
  If the problem persists, use the troubleshooting section "video does not appear in the webcam software.
  Method 2:
  
  If you are able to find the Webcam on your screen and you cannot view the video using the software installed, you may need to update the Webcam drivers for more later.
  Read the sections "If you have problems with your webcam' in the article and check the results.»
  • Help app and webcams camera
  • http://Windows.Microsoft.com/en-AU/Windows-8/camera-app-FAQ

  Hope this information helps. Response with status so that we can help you.

• 4 desire 1015dx: problem with webcam and microphone windows 10

  Hi all

  I bought a 4 craving and I upgraded to win10, webcam and microphone are not working now, it displays unknown device in Device Manager, I tried to install the drivers for win8 and win7, but it doesn't seem to work, I am trying to downgrade to win7 now, but it seems that I lost the recovery partition I tried to get from HP, but he told me to buy it for $49.99, what kind of support is.

  If anyone has a solution for this please help me with this (problem or demotion to windows7 webcam).

  Kind regards.

  Hello @November12,

  Welcome to the HP Forums!

  I read your message and understand that the webcam and MIC do not work on your HP Envy Ultrabook 4-1015dx. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in these documents:

  1. HP PC - Webcam troubleshooting (Windows, 10, 8)

  2 HP Notebook PC - test a Webcam using YouCam (Windows 10, 8, 7)

  3. HP PCs - troubleshoot microphone (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• BCA install Win 10 since El Capitan "no boot device found". »

  I ran a Boot Camp for Windows 10 installation process using this configuration:

  MacPro3, 1

  El Capitan 10.11.2.

  Win10_1511_English_x64.

  Boot Camp Assistant 6.0.0

  I used a flash drive USB 2 for the installation disc.

  I modified the plist BCA as shown here:

  http://Tsentas.NET/create-a-Windows-7-or-later-version-install-disk-missing-on-e l-capitan.

  BCA works well, downloads support, creates what looks like appropriate on the USB installation files, and then create a MS-DOS (FAT32) partition on a hard disk that is dedicated in an internal Bay. At this point, it seems to be trying to boot from a Windows installation process and rise black screen "no boot device found... etc."

  Any idea whats up?

  Thank you, Bruce T

  Create a USB key modifying the Info.plist file does not work? There is a reason that it's missing at first, meaning that your specific model, with an integrated optical drive, needs to use a physical DVD. You can burn a DVD from ISO?

  Be aware that a 2008 MP has no W10 driver supported by Apple. A list of Macs Apple officially support it to use 10 Windows on your Mac with Boot Camp - Apple Support .

• I have HP notebook: no boot device found after the death of the computer during the update

  During an update my PC is dead, I know it must have been plugged and now boots to no device found startup please install an operating system on your hard drive

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to which typre of media you created, then click on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the system restore Windows to return the laptop to a point in time before that happen this isssue - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• How to fix this error: "MPT Boot ROM - no device found!"

  Ideas: my IBM Intellistation Z Pro 6221 boot from IDE hard drive. Error message "MPT Boot ROM - no deices found!" error message is displayed. Machine will start from a USCSI drive when it is connected. IDE drive is then recognized as drive D: to hard drive which does not physically OK. Normal order of BIOS. While that started from the drive SCSI Windows detects the IDE drive and after a reboot, I get a message that says that the ROM of the MPT Boot has been installed successfully. But when I disconnect the SCSI disk and then try to boot from the IDE, I again get the error "MPT Boot ROM - no device found!"

  Does anyone have a solution that will solve this problem and get the IDE drive to boot normally again?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Macz51,
  Thanks for posting on the Microsoft answers Forum.  The ROM of the MPT Boot part of the SCSI controller.  So, when you disconnect the SCSI drive, you will get the error message.  If the SCSI controller is a card, you can remove it, and then check your BIOS settings to start the command and make sure that the BIOS sees your IDE drive.  If you have problems with the hardware being not recognized before it starts with Windows, then you will need to contact your OEM for support. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• no bootable devices found

  Hi guys, I have a laptop malfunction on the no bootable devices found. I use acer 3810 t sucks. It was working just fine last night, but it is a malfunction of this morning.

  Looks like you have verified that the hard drive is dead!

  You can buy a new hard drive in a local store, PC or even online, like Amazon, among others. Opt for a similar or greater size than i ' existing. The size is noted in the UK, for example, 250GB, 500GB etc.

  Hard drive bracket is very simple as you may have noticed. You need to remove the caddy with the screw on the side of the old hard drive. Take the old, enters the new then put back inside your laptop. Once mounted, you need to reinstall WIndows from your recovery disks. If you do neither, they may be available for purchase from the Acer support for your region.

  Once completed, you will need to install Windows, your Anti virus updates and other programs, then all the documents you have saved.

• No device found Boot

  Acer laptop: v3 - 551 G - X 419

  Hello

  Problems with the bios. Disabled the power button one night and now there are no bootable devices found. At the start of tours on the property, then a screen indicating there are no bootable devices found and invites me to press "ok". Which is followed by the screen boot manager with a boot option menu that I give no option to start. Now, I entered the bios and restored by default and messed around with the start controls. After playing with the battery in and out and pressing the power button to see if something could be reset. I thought that the motherboard did not read the hard disk, but on the homepage of the bios, I see the model number of the hard drive. Maybe a fluke I thought so I grabbed one of my hard disks and bios selected upward, but always was'nt able to boot into it. My next plan was to see if I could start a flash drive or external cd player, Showed up in the bios but not start and do not show up in the start menu. I decided to go and pulled the cmos battery in the system and reset the old way and still nothing. I can't get a boot cd and flash the bios or flash, I'm quite the situation here . It's not under warranty.

  http://imgur.com/MnWVY0p

  http://imgur.com/x0R53R6
  [edited to conform to the guidelines]

  Thank you for your time.

  New systems designed for Windows 8 use UEFI BIOS instead of the old BIOS Legacy. Your other HARD drive probably wasn't UEFI boot configuration no matter what version of Windows until Windows 8 does support UEFI. You must change your settings bios for Legacy BIOS to boot a usb or cd and based on the rest of what you said your HARD disk is probably damaged. So I suggest to test or with a surface HDD scan tool or if you know what type of HARD drive, this is the manufacturer test tool e.g. (Western Digital Safe Guard) or start a windows install disc and go to repair from the command prompt type chkdsk/r % DriveLetter %:.

  -Bennett

• built-in Bluetooth is always 'no devices found '.

  I use windows xp sp3 on my laptop of HCL ME 38... my built-in bluetooth works well until a few days ago. but these last two days I noticed that the bluetooth icon showing evrytime 'no devices found '. Even on Device Manager there is no bluetooth device is here... all the guys the solution!

  I use windows xp sp3 on my laptop of HCL ME 38... my built-in bluetooth works well until a few days ago. but these last two days I noticed that the bluetooth icon showing evrytime 'no devices found '. Even on Device Manager there is no bluetooth device is here... all the guys the solution!

  Install the appropriate drivers for your particular machine at your special machinery manufacturer (or the manufacturer of the bluetooth device) and make sure that there is no physical switch (or enter the BIOS) accidentally disabled for bluetooth.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973