Aspire Z5600 stuck in a kind of test monitor mode

Similar Questions

• Hi, my Aspire Z5600 is stuck on the Windows re - screen and I can't use the USB keyboard screen

  Hi, I hope someone can help with a problem I have with my Aspire Z5600 all in one computer. I can't restart the machine because it is blocked on the page re-loader of Windows when I try to reboot.

  The screen is grey anthracite dark with white writing and gives me two options, to select one of the options that I would need to use the arrow keys on the keyboard and press ENTER to the action of the selection. The problem is fashion seems to be invalid the USB ports and the touch screen, so I can't select and option of each key board or screen and it will not pass, is just stuck on the screen, making the computer unusable.

  Can someone give me a solution to remedy to this problem please?

  USB should work even in this form, have you tried another keyboard?

• my standard drawing tools in a given paper seem to be stuck in some kind of preset isometric drawing. someone knows how to get back to 'normal '. my cursor has a cross and an arrow pointing to the left.

  Hoping that this is easy. my standard drawing tools in a given paper seem to be stuck in some kind of preset isometric drawing. someone knows how to get back to 'normal '. my cursor has a cross and an arrow pointing to the left.

  disable the perspective grid. Shift + ctrl + I

• my photoshop and lightroom are tested in mode but I'm in charge each month... How to fix? Thank you

  my photoshop and lightroom are tested in mode but I'm in charge each month... How to fix? Thank you

  Hello Deborah,.

  You can follow the article: Solve common Adobe Creative cloud activation of (log) and questions (disconnect) disabling or error messages that will help you get your fixed activation problems.

  Let us know if it works for you or not.

  Thank you

  Yann Arora

• Acer Aspire R7 stuck in the diagnosis of the PC / had media failure before you start.

  I woke up this morning and I saw my Aspire R7 with a black screen. He had the 'boot failure media' text, so I hard it started again with the power button as the keys were not appropriate. The computer has restarted and then wouldn't start, so I cycled in, on and off a couple of times and then he went in "Diagnose your PC" where he stayed for the last hour and a half.

  Does anyone have any suggestions?

  The specifications are:

  Acer Aspire R7-571 - 53338 G 1 .02Tass

  Core i5-3337U

  Intel HD 4000

  8 GB OF DDR3 MEMORY

  Hi Squilliam!

  Failure of bootable media, generally describes a fault/problem with the hard drive, or the connection. You can check the hard disk drive yourself to ensure that it is well installed, but if it's under warranty (which I think it's maybe) then contact Acer support for your region.

• Aspire One stuck in boot loop eRecovery. Stuck reboot Acer "Pls wait the moment" scrn

  I need to stop the boot netbook in eRecovery.  I just want to start Windows.

  I can get into BIOS and boot from the XP software CD.

  I tried to repair and reinstall, but every restart remains stuck in the loop to start eRecovery - screen Win XP, then black start Acer eRecovery and Acer screen screen "Please wait a moment..." ", then restarts - back in the same loop - aqua color forever... I searched the Internet for solutions and found nothing.

  I just want to stop eRecovery and restart windows, the files are still there.

  You can try to use a program called PTEDIT.

  you need a floppy disk bootable with her BACK on.

  Start in PTEDIT and set the second partition bootable (change the second colum to 80) and the type 07

  Change the types of the first and the third partition to format BACK not as OC.

  I don't remember the exact type that must be configured so it can stop work to restore function.

• Acer aspire one stuck to the charger page

  My netbook gets as far as the windows loader page. The keyboard is unresponsive, as are the usb ports. None of the forum answers work so much they seem to assume that the keys work

  Hello

  all I can suggest is F8 at startup to boot options

  or Alt + F10 at startup start you the process of recovering back to factory settings

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the keys Alt and F10 repeatedly.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the system recovery application is loaded, follow the instructions to reinstall the operating system.

  but you say that no keys don't work

  I suggest you contact acer

  http://support.Acer.com/us/en/default.aspx

• Help stuck in Windows Server R2 2012 kernel mode

  I have recently installed windows server 2012 r2, which turns out to be the right product, I was after and now can't get out of kernel mode and get stuck looking at the command line. I tried "Install WindowsFeatures Server-Gui-Mgmt-back running, but this only loads to 68% then fails because it cannot download the source files.

  I want to delete r2 Windows Server 2012 and return to the old windows 7 I had installed. Are there documents, or methods of removal of windows server r2 2012 or restore my old windows, I would like to know please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.msdn.Microsoft.com/Forum
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

• Acer Aspire 6930 no screen, not even on external monitor

  One of my clients gave me an Acer Aspire 6930. He said that he was looking at internet porn and he got a message that he had to pay $300.00 to unlock his PC and it stopped on him (see the ice virus?). When I tried to bring up the laptop I have nothing on the screen to indicate to all life. But the disks rotate. I tried to boot from a Windows XP disk and still nothing on the screen. I tried FN + F3 and FN + F5, FN + F6 to no vail. I tried video routing using a HDMI cable and by repeating steps and received a 'no signal' on the external monitor and I tried the same process using a VGA cable for the external monitor and still "no signal". I tried to Flash the bios with a modded one since I don't know how to seprate the exe of the bios with insertng hex editor the usb flash drive and pressing the FN + ESC, and then press the power button and now the keys FN + ESC 5 additional seconds. I am now completely at a loss and could use very little help.

  Thank you

  Definitely one of our best posts.

  I'm sure you already said your customer to upgrade its anti-virus software and stay out of the porn sites.

• RE1000 stuck in 802. 11 b / g mode of

  Just bought this camera today and very disappointed, as I've been with several of my recent purchases of Linksys.

  In any case, try to make the best of it... after hours of messing around to configure and test, I found that the RE-1000 is in 802. 11 b / g mode, whereas my router WAG120N presents itself as the 802.11n (it is actually being run in mixed mode for g and n devices)

  I wonder if anyone knows how I can get out of 802. 11 b / g mode and somehow get it up to speeds n we have n devices connecting to the RE1000 and get a very slow flow.

  Any help or advice would be greatly appreciated!

  As the work of the range extender is to extend the signal wireless to the router, it should be able to pass the signal on mode N also. Try setting the security your gateway to WPA2 wireless if it is not already set to that. You may also need to change the channel of your gateway wireless. Try to define the Standard 20 MHz on your gateway radio band and use channel 1, 3, 6, 9, or 11. Check the firmware version on the range extender as well because he might be running on the old version. You can check the version of the firmware here: http://support.linksys.com/en-eu/support/rangeexpanders/RE1000.

• Acer Aspire laptop bluescreened, will not start even in safe mode, running vista

  My roommates son asked me to help him to be on the internet, which I did, ran unusually slow in doing so, I noticed it when I checked, I found that the notebook had three solutions of different software protection, antivirus, Norton, McAffrey and AVG 2011 version for free. Also I noticed he had some solutions that provided a diagnosis, list of problems found and wanted to pay for the product before they would allow acccess to the fix. I uninstalled Norton and the McAffrey and improved the AVG free version of 2012. I also uninstalled the pesky diagnosis/buy me for the correction and the ask.com toolbar software. I installed ccleaner from piriform as well. The laptop seems to run a little faster, but the next morning he projected blue and when I tried to start it in safe mode it not loaded so far and then frozen, always in the same spot something AVGi and then it crashes, it will not load the rest of the necessary drivers. I tried to boot to the last known good as well. I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.  I am at a loss, my sons friends bought the laptop (Acer Aspire 5315) for $50.00 and did not get a recovery disk so that the option does not exist or the other. What can I do to solve this problem. I'm sure that for some reason, it has to do with the BIOS and I went to the Acer site (from my laptop) and downloaded something to repair the bios on a flash drive, but me is not good because I can not start on either flash player. I am at a loss here and have no idea how to solve this problem. I am practically self-taught and I am a beginner when it comes to repairing the problems. This one is right behind me, someone has an idea what is my problem?

  I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.

  If you tried to install Windows XP, and it says that? Do you have any installation CD? I don't want to say this, but maybe the hard drive went kaput. Maybe a little rare, but it can happen and so he bought the laptop for $50, which I am sure he did not a store. You hear a clicking sound from the hard drive? Have you checked for the hard drive in the BIOS?

• Aspire MP3800 overheats during games and stop of monitor only downwards

  Hello. Recently, our office has begun closing the screen while playing games (especially the new graphic high through Steam or even Facebook). The system itself seems to remain on (only stops the screen itself) but you'll have to retart everything to get it to turn back the computer. I ran one of these programs to monitor (CPUID HWMonitor) and showed some temperatures increased enough high immediately after I restarted and checked. For example the CPUID, the TMPIN0 varied from 51degreesC to 65, while the Core #0 (under Intel Core 2 Quad Q8300) varied from 36 c (current) to 56 C.

  I am not that savvy with terms, but the fan in the middle of the PC's.

  Note: Recently it was not all games, but it will turn off the monitor shortly after I restarted the computer. There are also the odd occaiosn where he first close the monitor and then decides to restart the PC itself.)

  All of the suggestions. (Because I had problems with the monitor, I recently deleted the grahics drivers and reinstalled, but it made no difference).

  If the moniter does not work as it uses both for a new

• Can't stand 582PG Aspire V7 2 k / 4 k, on external monitors?

  Hello everyone tried Monitor 2 k / 4 k?

  I want to know if this laptop is supported via hdmi or display port

  I plan to buy Acer H257HU

  http://pages.eBay.com/link/?nav=item.view&ID=201447871352&ALT=Web

  I just checked google search...

  Others with other laptops with same HD4400 Intel and Nvidia 750 M supports 2 k and 4 k, but k 4 only at 30 via DisplayPort Hz and 24 Hz HDMI HDMI version 1.4...

  2 k is supported on standard 60 Hz so perfect, I don't want just 4 k 2 k is good enough...

  Thnx anyway

• My computer is turned off and when I grew up it is stuck half half reg operation see safe mode.

  My computer turns off on me last night when I was watching new online. Today, I spent 7 hours struggling to make it work. I resorted to the insertion of the disc of windows xp prof so he can start. I ran diagnostic and it seemed to be running. I restarted without.  I can't run essentials of security it is said stopped program.

  I get errors saying that I am mode without failure or other problem with 0x8007042c or 0x4ff02.  When I tried to run "fix" he said found no link. I use firefox because IE does not at all.  Essential security said programs service is stopped.  I can't perform all functions because now everything is connected through it.  You have more link to run the scan of your website independent of my system.  I have bar on bottem of screen showing any window not open or any programs running, when you reduce it quits the program.  It took me 7 hours to get to midway up and running and partially online to find help.  I spent 2 hours to ask and answer found nothing that would work because when I start and etc the next thing I need to find is not there.

  Firefox because IE does not at all.  Essential security said programs service is stopped.  I can't perform all functions because now everything is connected through it.  You have more link

  Bluetooth is an amazing technology which allows you to extend the portability of your computer or mobile phone Toshiba. Bluetooth is easy to use, and connect your mobile device to a Bluetooth device could not

• does not run any kind of security system mode scan course stops!

  whenever I try to run sfc/scannow in safe mode or any computer together, the security scan random sown without going through the correct closure method! I had this problem for a while and I tried to restore the entire system of "out of the box" State, wiping everything out of him and he always does!  Also, windows through windows restore repair fails in normal operating mode, she also always says that I don't have administrator privileges necessary to accomplish what I need to do on this Pc and I'm the only 1 who owns or does anything about it! Also installation of WINDOWS SERVICE repeat myself that there are not accessible! I try to turn it on in the services, but it says path not found as if he had no windows installation service! Please help me - MAIN QUESTIONS! 

  Hello

  You may need to contact the manufacturer or do a clean install of the operating system.

  Note: Be sure to back up the data before you perform a new installation.

  See: http://windows.microsoft.com/en-US/windows-vista/Installing-and-reinstalling-Windows-Vista