Assistance necessary for the performance of a downloaded firmware file

Similar Questions

• I would like to have the best possible experience for the games on my laptop and I want to download everything that is necessary for the performance of the games.

  I bought a new laptop which has Windows 8. I heard that Windows 8 is new, it only is not automatically provided some 'things' - forgive me for my lack of knowledge in technology. I intend to play games on my new laptop, but according to my knowledge, Windows 8 does not support things like Visual C++ and Directx 9. I am very uncertain about this subject, however. If anyone understands this as am I mean, can you please correct and/or explain more on this topic? I would like to have the best possible experience for the games on my laptop and I want to download everything that is necessary for the performance of the games.

  Original title: what's missing in Windows 8?

  Jack

  We were all new at one point, so don't worry what you know.  Win 8 is compatible with all previous OS.  It supports C++, and depends on your video card supports DIrectX 9, 10 and 11.

  The only thing that doesn't come with win 8 (and since you bought it, it may already be installed) is windows media player.

  What exactly are you trying to do, or can you give us more information for we can help you better?

• [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Hi all

  12 c

  Win7 64 bit

  I install 12 c, but I encountered error:

  

  [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Cause - failed to access the temporary location.

  
  

  Action - make sure that the current user has required permissions to the temporary location.

  Additional information:

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  
  

  What temp file should grant permissions to?

  Thank you very much

  JC

  Hello

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  Line underscore or annoying characters on your node name cause problem. What is the name of node? Please change it will solve the problem.

  Current version 12101 is to have this constraint. See MOS: 1957895.1

  -Pavan Kumar N

• East of 128 MB of video RAM necessary for the performance of Vista

  I was looking at the Windows Vista box for the minimum run Vista and it says that 1 GB of RAM is required.  But another source indicates that the video card must have minimum video on 128 MB of RAM to run Vista?

  Hello

  It depends on the version of vista:

  "Supported graphics DirectX 9 with WDDM and 128 MB graphics memory (32 MB for the basic home edition)"

  Memory (RAM) RAM and video memory are 2 different things

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  RAM

  http://en.Wikipedia.org/wiki/random-access_memory

  Video memory

  http://en.Wikipedia.org/wiki/Video_memory

• Warning__program error__one or more files necessary for the operation of the memorex expressit label design studio are missing or corrupt. Please use the Setup program to reinstall the software.

  Tried to update to Safari that does not work after the update. Then my printer stop working. Get the following message: 'WARNING '.
  program error
  necessary for the operation of the studio of design of memorex expressit label one or several files are missing or corrupt. Please use the Setup program to reinstall the software. »
  Already uninstalled and re-installed the software manufacturer labels several times. No luck.

  It seems it all started to go wrong after your update of Safari went wong:

  http://www.Apple.com/support/Safari/

  Link above is for Support of Safari.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  We do not know your Label program Vista compatibility.

  Check if your program is Vista Compatible:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It comes with Vista, upgrade install and activate Forum.

  Try the Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Adobe Application Manager, necessary for the verification of your driver's license, is missing or damaged.

  Adobe Application Manager, necessary for the verification of your driver's license, is missing or damaged. It appears each time I open a program from adobe. I downloaded the Manager, but he did that update hasdobe asks Manager.Please if you have an answer answer to me.

  N ° 1)

  Launch the Task Manager, click on the more details and end Adobe all related tasks.

  Step 2)

  Go to C: > Program (x 86) > " common files" > Adobe.

  Open the Adobe folder and delete files named Adobe Application Manager and OOBE.                  [Important]

  Impossible to remove? try to rename. as old OOBE. and Adobe Application Manager old.

  Step 3)

  Click on the link below and download Adobe Application manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Once the installation is complete, look for the icon of Adobe Application Manager launch on desktop and double-click it.

  It will start the update process.

  Once the update is complete, launch applications CC and check.

• going on a computer: how to cancel the password which is necessary for the opening of the computer

  How to cancel the password which is necessary for the opening of the computer

  Do you mean that a password is required immediately after you turn on the computer or when you arrive at the Welcome to Windows screen? If the first case, it is a BIOS password and how you disable it depends on what type of computer you have. If the latter:

  Set up Windows to automatically connect (MVP Ramesh) -http://windowsxp.mvps.org/Autologon.htm

  If you would like more information or is not what you mean, please explain your post.

  MS - MVP - Elephant Boy computers - don't panic!

• I'm looking for the practical review of Photoshop CS5 files.

  I'm looking for the practical review of Photoshop CS5 files.  I downloaded the screenshots, but I need the files.

  I need to 2 - 3.psd, 3_2mask, SleepingPug, Parking, 4.1.psd etc.

  Hi Angelas,

  You can download the PSD files: free, PSD + 5.500 free Photoshop files

  Kind regards

  Tanuj

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• How to download Photoshop cs6 extended and install it on my computer (I have the license, I already downloaded instalation file but I can't open it)

  How to download Photoshop cs6 extended and install it on my computer (I have the license, I already downloaded instalation file but I can't open it)

  Hi Maja,

  Please see the link: http://www.adobe.com/downloads/other-downloads.html

  Let us know if that helps.

  Concerning

  Megha Rawat

• What drivers are REALLY necessary for the 230 x?

  Hi guys,.

  I recently bought the 230 x - it's great. I also bought an ssd with it and replaced defaultt with the ssd hard drive and did a clean install of Windows 7.

  I have 2 questions:

  -the drivers are REALLY essential for my device? Visualize the page drivers, there are a LOT of drivers that can be installed, but I think that some of them are not really necessary, because I don't want to slow down my superfast x 230.

  -are there a way to download all THE drivers both in place one by one?

  Thank you in advance,

  Mustafa

  Hello and welcome,

  I can't tell you which drivers necessary for what you want to do, but the best way to get them is to install ThinkVantage System Update.  Run it and it will present all the appropriate drivers for the download and installation.

  You can review the details of each before you download and decide which ones you want.  Only, check the box for those that you want and let TVSU download and install to a slap.

  [edit] It is a pure opionion, based on nothing else than my preference: I'd rather live with the installation of Lenovo for awhile and see what I like - and then uninstall the stuff I have not.   IMNSHO, the initial indigestion is not that bad on a ThinkPad.  OTOH, depending on the size of the SSD, a clean installation may be the way to go.

  Z.

• Assistance needed for the registration of the application and store the values in a table

  Hello

  Hope that this explanation is not confusing. I explained my application you want in the text below and also attached a skeleton VI + screenshot hoping that he will clarify

  I try to do a VI that does the following:
  1. some code (blue Subvi) runs every 200ms
  2. every 200ms, a random number is generated
  3. the random numbers are stored in a table in intervals of time s 0.8 ("iterations")
  4. at any time, the (blue Subvi) code needs to have access to the random numbers generated in 'the previous iteration.

  To clarify, the iterations are as follows:
  Iteration #1: 0 - 1.8 s
  Iteration #2: 2 - 2. 8 s
  Iteration #3: 3 - 3.8 s

  Iteration #4: 4 - 4.8 s
  ..
  And so on...

  So for each iteration: the blue (Subvi) needs to have access to the random numbers generated in the previous iteration, for example:

  Iteration #1 (0 - 1.8 s): The blue (Subvi) Gets an array that contains only the zero (random numbers are recorded for the first time)
  Iteration #2 (2s - 2 8 s): The code gets an array containing random numbers of iteration #1
  Iteration #3 (3 s - s 3.8): the code gets an array containing random numbers of iteration #2
  Iteration #4 (3 s - s 3.8): the code gets an array containing random numbers of iteration #3
  ..
  And so on...

  At any given time in time;
  -The code gets an array that contains all the random, recorded during the previous iteration numbers
  -Values since before her previous iteration are ignored and not stored anywhere

  Thus, for example, to the #7 iteration:

  -The values during the iteration #6 are made available to the code in the form of a table

  -Values of #1 to #5 iterations have been deleted and not stored anywhere

  It is important that all values since before recording the previous iteration are deleted because they are not necessary because VI actaual will work for a long period of storage of numbers a lot more than I have indicated here

  Screenshot of the skeleton VI:

  

  I tried to play with the paintings, the structures of the case and the registers at offset, but everytime I try I get something wrong

  The skeleton VI is also attached (Iteration_VI and Code_SubVI)

  Any suggestions?

  Thank you!

  Yes, I agree that you need help.  First of all, you really do need to learn more about LabVIEW - spend a few hours with the tutorials, such as those mentioned on the first page of the Forums.  Oops - links to the tutorials which had been present for years seem to have been moved "elsewhere" with August 2016 LabVIEW community reorganization.  But look for them...

  Here are a few screws that basically implement what I described above (with some minor modifications).  First of all, this is a Top level VI which runs at 5 Hz (200 msec waits).  It starts with an array of 5 elements of 0, then once per second, this is replaced by a table of random numbers generated by the Random 5-table sub - VI 5 elements.  Note that I do not use a loop timed - those who are really designed for LabVIEW RT, but use the simplest functions on the Palette of the timer.

  

  Can't you see how that works?  The array to initialize on the left begins you with a table of 5 elements of 0.  The Timer inside the loop, it runs at 5 Hz, 'Index' counts 1, 2, 3,... to tell you where you are, and 5 shows you everything that lives on the shift register.

  Now sub - VI Random 5-table is supposed to do the following - if she was called to 5, 10, 15,..., it must return a (new) array of 5 random numbers, otherwise, it must return the array that was passed in.  So if all "works", table 5 shows 0, 0, 0, 0, 0 for the first second, a table at random for the second second (which is not superfluous!), a different for the third random picture second and so on.  I have already said a way to build this, but I chose a slightly different method (equivalent).

  

  Whenever it is called, a new random element is generated and added at the end of a (growing) random table stored in the shift register.  If size become 5, we send this Random-table-of-5 out through Out table and reset the register shift to an empty array.

  The case by default (when the size is not equal to 5) is shown below - we just return the array of entry to and accumulate new random table in full growth.

  

  These code fragments extracted from VI.  If you have LabVIEW 2016 (see the "2016" at the top right of the image?  This shows that it is a snippet of code LabVIEW 2016), you can open a blank diagram and drag this image, where magic OR converts it to a VI.  Otherwise, the code yourself and try out it.

  Caution - it is designed to run once.  If you run the program of high level, a second time, you may find that the new Random 5 - table appears to 0.4 ", 1.4", 2.4"(instead of 1", 2 ", 3").  I leave as an exercise for understand you to (a) why he is and (b) fix the code.  If you can't do that, then move an another 3-4 hours with the LabVIEW tutorials (or start playing with this code, edit it in some small way and to understand how it works).

  Bob Schor

• Where can I find a driver for the PCI Flash memory download?

  I do not understand the type of driver to download from the Acer download site. I need PCI Flash memory

  Hello

  Acer support has for the correct drivers

  http://support.Acer.com/us/en/product/default.aspx

• Tried to install Trend Internet Security program, error message, necessary for the installation of Visual C ++ 2005

  When installing Visual C received then Error 1935' Microsoft. VC80. Open MP type = "win32policy", processor version 8.0.50727.762 Architecture = "x 86".

  Running Windows Vista 32-bit - I'm no guru IT but can generally follow clear instructions - can anyone help?

  Hello JenMox,

  Sorry for the delay in publication.

  Look at the following information about the Error 1935.

  Step 1

  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 Redistributable Package, and check if you can install the software. Be sure to download the correct version, if your computer is 32-bit or 64-bit.

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 64)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da

  I hope this helps.

  Sincerely,

  Marilyn

• Still waiting for the confirmation e-mail to arrive for the Windows 7 upgrade download

  I just bought a download to update Windows 7 Starter in the home edition, so I might want DVD on my Dell netbook.  The Microsoft app site said I would receive an email with the key code to download this.  I've been waiting over 2 hours now and still have not received the news.  Is this normal? Thanks for your advice.  Annette

  Have you checked your spam folder?

  Try to contact the Microsoft Store:

  1-877-MY-MSSTORE (1-877-696-7786)
  http://store.Microsoft.com/help/contact-us

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP