At the system restore in Vista after getting a virus, now cannot get the safety at work

Similar Questions

• When I try to access system restore, or programs I get the message "windows cannot access the specified device, path or file."

  I use Windows XP and all of a sudden, it seems that all my files are gone.  When I try to access anything or in the control panel in Help and support, I get the same message.  Even when I click on the box that appears indicating that my disk hard space available is insufficient, when I click on it I get this message.  Anyway for my restore my system and access my files again?

  Hi Ladygodiva7,

   

  Method 1: Put the computer to an earlier point in time where everything worked well. To do this, follow the steps mentioned in the article below to perform the system restore

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

   

  Method 2: you can follow the steps described in the section below to restore the security settings

  How to restore the security settings to a known working state?

  http://support.Microsoft.com/kb/313222#appliesTo

• My keyboard does not work after a System Restore checkpoint to help get rid of a virus

  My HP desktop computer has a virus that disabled McAfee, Avast and Malwarebytes.  I tried to solve the problem with the solutions found on the internet. My last attempt was to make a System Restore checkpoint.  The restoration was a success, but as soon as my PC restarted during the process of my keyboard don't work, when I went to enter my admin password.  The keyboard works fine in the recovery console, but not in safe mode or when I try a normal start, any advice would be appreciated.  Can a repair installation fix the problem?  What is the result of a corrupted registry of the virus? Do to restore the keyboard driver?

  Hello

  • What is the brand and model of the keyboard?
  • What is a wired or wireless keyboard?
  You can view these methods if you are able to connect:
  Method 1:
  You can check with the keyboard of the screen.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/osk_overview.mspx?mfr=true
  Method 2:
  I also suggest you try to update the drivers for the keyboard and check.
  http://support.Microsoft.com/kb/283658
   
  Method 3:
  You can also try different keyboard and check.

• Unspecified error occurred during System Restore.Running Vista Home Basic 32 bit

  After running system restore and restart my computer, I get the message "unspecified error occurred during system restore. I'm running Vista Home Basic

  32-bit. someone at - it a response? I have no idea what to do next.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• System Restore DVD Vista vs Windows 7

  I'm new here and I apologize if this has been asked before.  I looked around and tried to search but can't find my answer.

  I just reveived my new HP Pavilion dv7t last night.  Notebook Essentials booklet says to create a set of DVD system restore, but This can only be done once.  I am in the process to register for the upgrade to Windows 7 snce is expected within a week.

  Should I go ahead and create the restore DVD system with the Vista operating system, and if I do I then will be able to create another System Restore DVD for Windows 7?

  I want to assure you that I have a restore of the system based on both operating systems, where I need to go back to Vista, but still have a system for Windows 7 restore, if it proves to be stable and I like the OS.

  I hope this makes sense...

  Make your Vista recovery DVD. Two reasons...

  1. you will not be able to do a cover of 7 Win set, (unless, of course, HP offers a magic here).

  2. If you install Win 7 and you need to reinstall it later, you will have to start with the Vista installation and repeat the upgrade process (unless HP upgrade version works differently from the retail... version did not get a response on this one here).

  Of course, you can always use an application of imaging to make an image of the newly installed Win 7 to use in the case of a reinstall. Acronis True Image or Macrium Reflect are 2 choices. Macrium is my preference.

• How to do a system restore to vista settings factory

  Microsoft Vista Edition home premium

  6.0.6002 service pack 2 Build 6002

  It won't let me. I back up the files and restore files only. I clicked on restore advance, which is the configuration and status of backup and restore files, I see if. I don't have a disc. How should I do system restore the original configuration. Step by step guide.

  Usually, you get 2 options which is recommended to restore and choose a different restore point. I don't get any of those.

  I do not understand how my other computer (vista) I would like to do system restore to factory settings without using discs and what a custom?

  Hello

  You do not use the Vista System Restore feature to put your computer to the factory settings.

  System Restore updates only your computer settings to an earlier date.

  How to do a restore to factory settings, ask your computer manufacturer.

  You would either find a way to start the process under programs > then the manufacturer of the computer software > look it up it > or you will need to press some keys at startup.

  It would be either F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them how to do it because it's their recovery process.

  Or ask them to send you a set of Vista recovery disks to reinstall the operating system.

  They should do this for a small fee.

  See you soon.

  p.s. Save your files as all data will be lost normally when you perform a restore to the factory settings

• Need to do system restore in Vista, but don't have no restore disks

  Have lost my windows vista boot floppies, need to do a reboot complete sytems any ideas?

  * original title - lost drive *.

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  and if you need a startup repair disk;

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• blackberry.system.hasDataCoverage () - for help after getting out of the widget?

  My widget is a form that my users will initiate and complete when they are offline.

  I know to use the blackberry.system.hasDataCoverage function to check for network connection and if there isn't one, to save the entry from user to localstorage.

  I want to make the process as transparent as possible for them. If they fill out the form (and the data is saved to the localstorage), and exit the widget, is there a way to take advantage of the hasDataCoverge when they find connectivity?

  Hi, MMC,

  You can use the onCoverageChange event to see if something has changed http://www.blackberry.com/developers/docs/webworks/api/blackberry.system.event.html#.onCoverageChang...

• I wiped and recovered from my CD of my operating system to windows XP due to a virus, now my system XP is SP1 (version 2002) and needs to upgrade, how can I get the old updates please?

  I am operating windows XP, but it is more difficult to download anything, I can only assume its because my system recovery disk brought me originally pack 1 and missing essential items in my system which is used to enable automatic updates to work to get my system back to normal.

  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• I did a system restore to recover an uninstalled program and now my computer will not sleep.

  I tried to fix it when you restart the computer, and that doesn't seem to work. Running out of ideas! Help, please!

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Lenovo T61 - 7663-AY2 uninstall Vista SP1 to SP2 and now cannot restart

  Hello community,

  I did something wrong with my Lenovo computer.

  I tried to upgrade vista SP1 to SP2 in order to continue to receive updates from windows, but I failed to improve.

  I read on a forum that to go if you have some difficulties to move from SP1 to SP2, the best thing to do is to uninstall SP1, in order to re-install again and after the update to SP2 is easy.

  So I uninstalled Vista SP1: KB936330 from my laptop and now it cannot restart. I'm facing the famous! 0xc01a001d! registry error.

  I tried all content restoration factory (MS DOS, restoring from the last restore point), but it cannot restart.

  Is there a usual thing do in this case, before the start in the order, he returned with the factory setting?

  My warranty expired on September 21, 2010, and I bought my computer in France while I am in England now.

  Thanks a lot for your help.

  Mitch

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67853

  Here is the driver matrix which relates to your T61

• I have 10 windows, my child has windows 7. How can I get family safety to work?

  The subject says most of it.  I have used parental controls to set up parental controls Web site, however, it is said that it applies only to the windows 10.  My child's computer to Windows 7.  I tried to connect from his machine to implement controls, and he also said that it applies only to windows 10.  What should I do to make this work?

  Hi Philippe,.

  Family safety is available on the operating system Windows 8, 8.1, and 10. Windows 7 has a Parental control feature that will allow you to access your child's computer activity.

  To configure Parental controls in Windows 7, follow the steps below:

  1. Press the Windows key + R on your keyboard.
  2. Type command and press ENTER.
  3. Choose the user accounts and family safety.
  4. Select the Parental control.
     
  5. Click the child's account (Standard user) you want to set up with Parental controls. If there is none, you can create a.
     

     Note: Make sure to set up a password for the administrator account to prevent other users to change or disable the Parental control.

  6. Under child account, activate the Parental control.
     
  7. Under Windows settings, you can now put in place restrictions on the activities of your child's computer by implementing deadlines, control games rating, content, or title and allow and block specific programs.
     

  However, if you want to control your child's online activities, you need to install Windows Live Family Safety which is part of Windows Live essential suite. To download, click on this link.

  Let us know how it goes.

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• Receive the error code 0x800700b7 during the Vista system restore

  Get the error code 0x800700b7 during the restoration of the system.
  "System restore failed due to an unspecified error. Cannot create a file when that file already exists. (0x800700b7).

  I have a Dell laptop, Studio, running on Vista.  I just installed some Windows updates (ALWAYS a hassle!) and restarted the system.  Failed to start,

  I tried:
  (7 times) Startup Repair
  System Restore (at least 7 times - try them different restore points to restore the system, going back to mid-May
  Trying to reboot without doing anything

  The error message persists.   I can't boot the system in safe mode, so I'm not able to disable the antivirus software or go to start or anything else.  Windows does not start. Y at - it a fix for this error message?
  Help!

  I managed to fix it on my own over the weekend. In Safe Mode, disabled Norton and also downloaded a tool that Norton offers to help solve the problems of this kind.  The tool worked and my laptop works fine now. The update of Java was the problem - I don't allow anything not my automatic update system, but Java auto-updated anti-virus Norton was on.

• Need to do system restore after you perform the most critical updates

  Since getting internet cable in January, and the creation of a network, I couldn't install more updates to Vista security on my laptop Dell for 5 years.  Every time I have download and install, the next time I start my PC, repair Windows startup program is displayed because Windows cannot start.  The only solution never finds it is to do a system restore, which of course gets rid of all the updates of security that I just installed.  An exception to this rule are the updates with a tool to remove malicious stuff.  Those who work.  And my works of Bit Defender.  But I'm heading out for big trouble not being able to do all the other critical updates?  What do you think is the problem?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  I suggest you to install the updates one by one and...

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/9b7aafc2-5e3c-4d2D-BC01-4b81d319922a >

  NOTE: any changes you make now will NOT affect updates already in the queue of the installation. For which is concerned about the automatic updates, you have already approved these updates.

  UTC/GMT is 07:30 on Tuesday, may 1, 2012