Impossible to stay connected to the computer

Similar Questions

• Unable to restart or shut down Windows when a USB modem is connected to the computer

  When I plug a USB modem, either 3 G or dial-up, my computer will restart or shut down. It complements the normal stop the procedure, but instead of actually put back in power, the screen becomes black and stay like that. After a manual stop, Windows reports that he is recovered from a serious error. I have had this problem since I first installed Windows Vista about half a year ago. When there are no modems connected to the computer, it restarts and stops normally. In addition, printers and USB flash drives appear not to cause to happen.

  No idea how I could solve this problem? Thank you.

  Works fine now. Another bug of Microsoft.

• Photosmart B210e stay connected to the PC (wireless)

  Hello

  I'll give you my specs first:

  HP Windows 7 64 bit hard PC connected to the security of WPA-PSK/w N + Router Belkin Wireless.  The printer is connected to the network wireless about 15 feet from the router.

  I have problems with my Photosmart B210e stay connected to my computer.  The only way I can get my computer to see my printer is to restart the printer.  After the printer starts I can print from my computer for about 10 minutes.  After that the computer can no longer maintain a connection with the printer.  According to the screen on the printer, I'm always connected to the network, but when I try to print I always get an error to the effect of the computer cannot establish a connection with the printer.  I have to restart the printer if I want to print again.  I don't have another computer to install the printer, but I can send an e-mail to my printer from my phone which will print when my computer does not see my printer.

  I had the printer for a little over a year and it has always done.  I don't post things very often, but I still don't think it is necessary to be able to the printer whenever I want to print cycle.

  According to the Product Support page there is an update for my printer.  When I try to update the printer from the screen, he says: my printer is up to date.  I tried to update several times and it has NEVER been an option to update, so unless that updates are automatically applied I'm not sure why my printer cannot find the update.  On the product page there are also drivers of the 11/2010.  I bought my printer from Best Buy in 01/2011 so I don't know if I have the latest drivers.  However when I try to download and install the installation always fails me give no description as to why it failed.  He told me then it downloads a solution to the problem and installs an icon on my desktop.  As soon as I click on this icon, it says that it cannot be used because there is no internet connection, which is not true because I can open a browser and surfing very well.

  -J' tried to activate power saving mode that didn't work.

  -J' I attmepted to run the HP network diagnostic utility.  If I run it, as soon as I start the printer it works and shows that there are no errors, if I wait 10 minutes and try to run it does not find my printer.

  -J' I attmepted my printer of the assign a static IP address, I still have the same issues

  I'd appreciate any help that could be given, thanks for your time.

  Rob

  Routers Belkin have had some problems with HP printers.  Make sure your Belkin has the latest firmware.  Use the Belkin CD to do this.

• BlackBerry smartphone 8330 disconnect in the middle of the synchronization of the Manager Office, but still connected to the computer

  I am a new user.  I love my Blackberry 8330.

  However, yesterday I came across a problem where the 8330 disconnects constantly in the middle of operations with the Desktop Manager.  He does not often occur in one place.  I got several error types: connector specific error 0X80040fb3, cannot synchronize, etc.  Spontaneous disconnects are not confined to the calendar, tasks, or address book - it happened during all these and sometimes before it had even begun to synchronize.  I pulled the battery once.  It synced well after that just to have the same problems the next day.

  This happens in the middle of other operations using the Desktop Manager as well.  As the backup files.  It will shut off in the middle of one of the backup files, or will only stay connected long enough to a backup file.

  In all this, the computer recognizes the blackberry as connected and the blackberry continues to display the "connect to the computer.

  The Start Menu and taskbar will often hang or disappear after that the Desktop Manager ceases to recognize the Blackberry and then the Blackberry is always connected.  Once the Blackberry is disconnected, the start menu and taskbar is released from the hanging or reappears.

  Windows XP

  Office 2007

  Facebook, IheartRadio, Pandora, Slacker, Google Maps and a few other applications installed, Google search, My Verizon

  Also meet a few spontaneous reboots, but I think it has more to do with apps than anything else.  Some JVM 102 errors on restart.

  Feel free to ask me questions.  The Blackberry but frustrated love.  Have tried other things to search through the forum, but none solved the problem.

  JVM 102

  It's your first question, it solve first, probably will solve everything

  I hope that you have at least 1 good backup to restore after

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• iPod classic connects to the computer

  Hello

  I have an iPod classic, since 2005.

  It will charge from the grid, but when you plug it into the computer it does nothing... Does not make a noise, does not load... Nothing, only thing that happens is that when you disconnect the computer screen lights illuminates... tried all USB ports, still is not, tried 3 computers, does not work on any...

  so I tried 2 more iPods, an iPod classic in 2004 and it worked fine. Tried an iPod nano of 2007 once again absolutely worked well...

  really annoying me now that I want to sync music on the classic...

  tried resetting the iPod, tried to run in the other mode keeping the home button and menu, press the button home-and play... None of them worked either

  Jake

  When you "recharge sector" (which I assume means an adapter of any), are you using the docking cable that you use with the computer?  When you connect iPod from 2004 and 2007 iPod nano to the computer, you use the same USB docking cable used with the iPod in 2005?

  Is the power supply adapter ("hands") accomplice of old load powering FireWire supported, not USB load?  Accessories older load use FireWire instead of USB charging, which has a different voltage and uses different "pins" on the dock connector.  An iPod from 2005 (probably a 5th generation "video" iPod) to connect to the computer via a USB port, but it can recharge using the USB or FireWire power.

  If you can confirm that the port host USB cable to connect the iPod in 2005 is good, my guess is that the 2005 iPod dock connector will not properly connect to USB power.  It can be worn or damaged.  Therefore, it does not connect to the USB port on the computer.  However, it always connects to FireWire, so she received the adapter (which feeds the FireWire).

  Use a flashlight to look inside the iPod dock connector, to visually check for damage, corrosion, dust or debris.

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,

• Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

  Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

  Hello

  The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

  

  Best regards

  ERICO

• Satellite C660 - impossible to remain connected to the Internet

  Can anyone help.

  I just bought a Satellite C660 10 days and am unable to stay connected to the internet without the power cord plugged into the laptop.
  When I disconect the internet connection lead is lost. Called to the shop I bought, and they say they have not heard this before I have Toshiba help desk phone. I called but they are closed until Tuesday

  Thanks in advance

  Hey,.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=61271

  It s known problem but a simple solution for it :)
  ?

• HP Officejet Pro 8500 A909a: Help on printer display message says: no connection to the computer

  Help on the printer screen says: no connection to the computer, but is connected via a USB cable. Also prints OK, but the HP solutions Center says: ink levels not currently available; iable.

  Well this thread of @greenturtle should help you with Troubleshooting.

  Please let me know if the Solution Center works after doing the above.

• I lost connection on the computer like many light wireless wireless router.

  I've got three Kindle and a laptop computer, more my PC connected

  Original title: I lost my WiFi connection at home in light of the route for the wireless is not lit.

  Hi geraldthorpe,

  Thanks for posting your query in the Microsoft Community. It seems that you have no internet connection on the computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) what is the version of Windows installed on the computer?

  (2) you are able to connect to Internet via LAN cable?

  (3) are other computers at home able to access Internet?

  (4) do you get any error code or error message?

  (5) have you made changes on the computer?

  I would like more information about the issue.

  Method 1-

  As a general rule, if the wireless light is not on the router means that the ability of routers to transmit wireless is lost.

  The router has generally, 4 types of fires.

  Power - number 1

  Test - number 2

  Wireless - number 3

  Internet - number 4

  Numbered LAN are turned on only if a network cable is connected.

  If the computers are connected wirelessly, all the lights except the indicator light should light up.

  I wish you perform a reset and a cycle of power to the router.

  Reset the router-

  You must locate a set PIN size behind the router and press the reset button with a pointed object for 10 seconds. Now, release the button and wait for the lights to come back.

  Note If the wireless light is back on.

  Power cycle-

  I wish that you unplug the router from the power outlet main and plug it back again.

  Check if the problem persists.

  Method 2-

  I would have you look at the article-

  Network convenience stores

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 3-

  I would have you look at the article-

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.