Atrix 4G - screen will not time-out after update 2.3.6.

Similar Questions

• Satellite L555-10N screen will not shut down after 10 minutes of non-use

  Hello

  I recently acquired a laptop Satellite L555-10N, which so far has proved to be a good choice.
  I have a little problem, however:

  In the preferences of my energy, I put the time during which the screen should turn off, 10 minutes, if the laptop is not in use.
  Although this worked well for the last few days and weeks, the display now will be not closed at all.
  I did not change the BIOS or driver or whatever.

  I remember to change some preferences in the configuration ecoUtility to enable.
  At that time, I received a message that preferences should be modified to enable the functionality and I agreed.

  I could not notice any changes have been made, but from there, the screen off more.
  I would appreciate your help!

  Thank you!

  Hello

  What operating system you are using?
  For Vista and Windows 7, I founded a good article on Windows power management settings:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  In addition, you can change the settings for each profile. This means that you should choose turn it off the display function for this power profile that you use or all profiles, if I used all of them.

  Check this box!

• My C850 Satellite will not be closed after update Win8.1

  I hope I can get help from this forum. Since I've updated my OS from windows 8 for windows 8.1 as my laptop (Toshiba c850) refused to stop, the screen goes blank (power off dark, signaling), but still the power light stays on, had to make a forced turn off many times.

  Please help because I'm losing my mind.

  Hello

  In my opinion, something was wrong during the upgrade.
  This is not unusual since I have read in various forums on strange issue after upgrade Windows 8.1.

  I recommend you do following:
  Set the computer laptop back to factory settings. Recover the laptop Windows 8
  Updated 8 Windows to the last State (all updates, patches must be installed)

  Then check the windows 8.1 upgrade information page http://www.toshiba.eu/innovation/generic/windows8_1-message/ and follow the step by step instructions that contain also the facility of 8.1 and tools Windows drivers in the correct order!

• iPad2 will not be 'activate' after update-"activation server is temporarily unavailable."

  IOS downloaded again today for my ipad2, but not "activate", tried several times during the last hours 7, get message ' could not be activated because the activation server is temporarily unavailable, try to connect your iPad to iTunes "but can't do it because I can't use the device!  I've never had problem in the 3 years I've owned the device.

  When they say connect to iTunes that they intend to use iTunes on a computer to try to restore the device. He has worked for some.

  http://support.Apple.com/kb/HT1414

  Or you could wait it out and see if Apple fixes things.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Dell is power saving mode and will not come out

  My Dell is power saving mode and will not come out? Any suggestions? I can't get anything else than a screen that says it is in power save mode and press a key or move the mouse. No one who does nothing. Don't disconnect.

  Hi Ma32206,

  Monitors Dell will automatically mode energy saving after a predetermined time amount when the computer is idle. The Dell monitor will go completely black, rather than display a screen saver. This allows your monitor to essentially turn off until it takes again.

  A. Press any key on the keyboard or move the mouse. Either will automatically turn off the power saving mode. Alternatively, you can press the power button on your Dell computer tower or laptop.

  B. press one button a second time if the monitor goes power saving in standby mode. Standby mode allows the screen saver appears.

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move...

  When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are

  (1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...

  what I've done

  I did a key recovery... even I am facing problem... Please tell me the steps to fix

  Original title: DESKTOP PROBLEM

  Hello

  Check with Lenovo support, their drivers and documentation online and ask in their forums
  on known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.

  =============================

  More troubleshooting if necessary:

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those with Dump in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Status bar at the bottom of the screen will not allow

  Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

  This has happened

  Each time Firefox opened

  Hello Darryl.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

• Windows Vista will not be validated after clean install

  Windows key, title: product original vesta H P,.

  buy windows key, product vesta p h, it will not be validated after a clean installation, only to discover, to upgrade only, that cost me $ 160 in two, three years ago, can aney help, how to fix this, davie.

  Hi David,

  Install and activate the original operating system provided with the computer first (I guess it's XP).

  Update to upgrade to Vista, then use the Vista product key that you used at the time to update (because it works now as you WILL upgrade and do not try to install only a facility full after an installed clean).

  Good luck!

  Kosh

• 7 slate screen will not turn

  The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

  As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.
  
  Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

• Can't connect, connection startup screen will not respond to mouse clicks or keyboard

  I do not have a DVD to boot from. I use a laptop (Acer Aspire 5610). The keyboard and mouse are internal.  Any suggestions at all? I tried the Safe Mode, Mode safe mode with guests hoping to type rstrul.exe, but never had the guest. He went directly to the display of connection with my daughter and my icons. I have added no new material.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cant-login-login-splash-screen-will-not-respond-to/54da4727-b98c-436a-8D82-f31c3355f5fd

  Have you shot inadvertently carpet of mouse/keyboard. This can happen through the Fn key on some laptop models. Find the picture on the key Fn, should give a clue.

  You can borrow or buy a usb KB and mouse that you would at least pass by troubleshooting?

  Tricky

• iTunes will not open even after reinstall on windows 7

  iTunes will not open even after reinstall on windows 7

  Hello mamaKAT,.

  Read the Apple article listed here:
  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.
  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just does

  I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just doesn't let me activate it. Can you help me?

  If you're referring at the origin of Creative Suite (CS1) then this activation server was closed by Adobe a few years ago.

  The only way to re - install now is to download a new version without activation for CS2 (also applies to CS1 owners).

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Install, then enter the new, without activation serial number provided at this link (column next to the download link). Your existing serial number no longer works.

• What to do when the required help screens will not accept any existing ID or passwords? 13 download to PC elements missing section archive. Normal help screen will not accept any adobe exisitg D. Whatdo, I do now?

  What to do when the required help screens will not accept exixting ID or password?

  Downloaded items 13 PC. Implementation noted this archive missing article.

  If something is demanding a password is not likely to be a request for Adobe since Adobe does not normally require any.  It could be your computer's security requiring you to allow an installation to occur.

• Lightroom 6 does not. Splash screen will not go away. Task Mgr "not responding".

  Downloaded and installed (twice), you click ok to update the catalog LR 5 (will not find a LR 6 cat, however), but the splash screen will not go away and program will not work.  Circle of blue rotation on forever, task manager says does not.

  Signed by adobe and in return, no help.

  I downloaded and install creative cloud and Lightroom 6 works now, it seems to pick up on initial start-up... How are we suppose to know?