Attack of the clones

Similar Questions

• Closure of the Clones of models

  I use a Template and VI server to create several "clones" that allows me to perform several tasks in parallel.  The Clones are written as a stand-alone VI, with a stop button on the control panel until I push by program to stop the Clone.  If I create, for example, three clones, I'll get three before Clone 1 Clone 2 panels and 3 clone.

  When I go to close the project, I wonder if I want to save the created Clones.  The answer, of course, is always 'no '.  Is there a way to 'close' programmatically these Clones without saving them so I asked this question?  I'm happy to have the front panels are not visible - indeed, my routine to start the Clone has an option "Hide the front panel" and my routine to stop the Clone has an option "Close cover" - If either is set, the Clone of the front panel are not visible when the program terminates.  However, even in this case, the fence project asks me to save all the Clones.

  Another issue that could be related to "Unregistered Clones" - when the program and the Clones are stopped and I try to fill in the project, I get a message saying "the proposed closure will stop some current screws execution".  However, to the best of my knowledge, there is no screws running is there something that I am missing?  'Do something' to the farm/stop all that generated this message?

  I guess that there are the "arguments" (or maybe even 'evidence') on the best way to spawn asynchronous clones - using a model of VI (like me) and start to help run a VI, making the reentrant VI and it start by running a VI or using the asynchronous call start.  I don't know the relative merits of these different methods, but conceptually (think in terms of 'prove accuracy', explaining to others, maintenance, etc.), model VI method seems not 'wrong' to me.  In any case, it's the premise of my question.

  I have all the clones close to "" asking them to stop.  I have two chances to close their facades - I can choose to run them without having to open the front panel, or can choose to close the front before stopping them.  If I make one (or both) of these, I received both a message saying, I couldn't close the project without stopping a VI running (but there was no 'obviously' running VI) and asking me to save all the clones.

  The correct answer to my question was to be sure that the references used to open and close the clones has been closed, something that I had forgotten to do (I discovered and corrected this omission today).  It seems the answer to my question.

• How to activate the clone to display 3 mode in Win7?

  I plugged 3 monitors. By HDMI, another DP and last is the Panel of the eDP. Initially, it is in simple mode. Then right-click on the desktop and select Select resolution. There is no way to activate the clone dsiplay mode 3 page of the OS. What is an OS Win7 behavior?

  Hi Deepa,

  Will they have the right settings and your graphics cards can handle the 3 monitors, then you should see the following behavior:

  Why my desktop computer is automatically duplicated on all screens?

  A mirrored desktop is the setting for several default display screens. If you don't choose how you want your desktop to appear in the new dialog box display detected, your desktop is automatically duplicated in each display.

  Article http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions

  In addition, another article:

  You can choose to mirror, or duplicate your desktop on all displays

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• Surface Pro and the Clone Stamp

  Hello

  Of course, there is a simple answer. I use Photoshop on my Pro Surface. I want to use the clone tool, but I don't have any alt key to select where the clone of no keyboard but only the pen.

  What the my options?

  Thanks in advance.

  A full keyboard of the IMO Microsoft Touch is not very usable with Photoshop on a surface machine.  Key is a much better solution for general use of Photoshop.  Microsoft touchscreen keyboard can still be used for text entry.  Button can give you the personalized screen keyboards that hide should the pen surface approach then.  Something like this.where, I have two key keyboard designed for use with Photoshop on the surface pro 3.

  

• I have a problem with the Clone Stamp tool?

  The Clone Stamp tool doesn't work really well it does not tell the source select and the pad want not applied the correction?

  You have two active subscriptions.

  1, adobe Stock.

  2. the plan of creative of cloud photography

  Please let us know the question you face with which order a screenshot will be more useful.

  Concerning

  Stéphane

• The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  What version of photoshop are you?

  The red eye tool should be in the same location as the healing brush and Patch tools.

  

• When you use the Clone Stamp tool CS6 the alt key does not work?

  Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

  Help, please? Thank you

  Steven Teo

  Hi Steven Teo,

  You are able to use the ALT key well otherwise on your computer?

  You can try to reset the Clone Stamp tool.

  To reset, follow the instructions below:

  1. Select the Clone Stamp tool

  2. right click / Control click dropdown at the top left

  3. choose Reset tool

  

  Hope that helps.

  Kind regards

  Assani

• When you try to use the clone stamp. a red part appears and the message saying it is a mistake and close photoshop, reopening the same case, no problem there is little time

  When you try to use the Clone Stamp tool, the screen becomes a partial red screen and a message from Windows saying that an error has occurred and close Photoshop.

  The same thing happens again after the reboot, ALL work is lost, this has happened only recently

  Hi all, thanks for your help, I went into preferences and disabled tick graphic, now everything is OK thanks Ben so

• Option-click for the clone stamp does not. I've tried several suggested fixes, no results. Help!

  Howdy!

  I searched and found similar questions on the forum and I tried all the solutions proposed, that I could find, but I'm still not resolve this issue. Hoping that maybe someone found a fix!

  The problem is that the option - click to set a point source for the Clone Stamp tool does not work, but the behavior seems to be particularly odd.

  With the Clone Stamp selected, tool if I press the option key pressed, I get the crosshairs target little, which makes me think that Photoshop is the option key is read and is not a recovery program of her clutter. When I then try to use the clone stamp, however, I get the dreaded error message:

  "Could not use the clone stamp because the area to clone has not been defined (option - click to set a point source)."

  I went through all the relevant troubleshooting steps, I could find elsewhere on the forum. I have updated to the latest version of Photoshop and my BONES. I tried to reset the tool. When this does not work, I reset the Photoshop preferences. I have disabled all the other programs that seemed that they might have some sort of overlay keyboard shortcut, but as mentioned, Photoshop DO change the cursor when I press the option key, which makes me think (although I am far from being an expect) is not the issue. I have no plugins or mods or anything of this nature that is installed. It is a completely vanilla installation.

  I am under Photoshop CC 2015.1.2 20160113.r.355 x 64.  My OS is El Capitan 10.11.2.

  Any help would be greatly appreciated. As far as I know, there is no work around. This tool is dead in the water for me until I can sort this out.

  Thank you!

  -Dom

  P.S. If this is quite in the wrong place to post a question like that, I'm sorry. I would like to know where I lead and I'll be on my way!

  I have to admit, I'm puzzled. Everything seems as it should. The tool has been reset, preferences reset and the layer looks very good. I wonder if it is a question with El Capitan. I use Windows, but know that Photoshop has had problems when El Capitan came out. If you have not used the clone 6 months stamp then it would have been pre - El Capitan. Have you tried completely uninstalling Photoshop, restart the computer and reinstall?

  I have not followed the El Capitan saga, you can read about it here

  Warning about Mac OS X 10.11 El Capitan

  As a last resort, you can try going back to Yosemite.

  Terri

• Cannot find the 'clone' on 14 items.

  I can't find the 'clone' on my new 14 items.

  You can switch between the clone stamp and the pattern buffer by opening the tool at the bottom of the Expert mode options.

  See the image below:

  

• Where the Clone Source Panel in Photoshop elements 10.0?

  Where the Source of duplication Panel in Photoshop elements 10.0?  I've looked everywhere on here and the internet, all say look under the window and it's there. Well, it's not in mine.  I checked everywhere on it, it is not found. By clicking on the clone button brings it either. I tried to play the video of Jack Nack and nothing will open it on my computer, not that it would be useful because it says to see the window too.  I want a clone of mirror.  I did in previous versions, but never in my 10.0.  I'm on Windows 10.  How to reflect the clone without the Board, or where the "thing" is hidden in 10.0?  Thank you!!

  No version of photoshop elements has a panel of Source of duplication, only photoshop cs3 via photoshop cc 2015 has a clone source panel.

  You can clone or copy the contents into a new layer and then go to Image > rotation > Flip layer horizontal or vertical layer Flip.

• Good candidate for the clone?

  I have an installation (Windows 7) VM compatibility with all installing the software already and that's exactly how I want it now my question is that I have an accountant who uses old XP VM and more. Can I just clone the current windows 7 VM and assign a different IP address? I know I can set it up and create a new SID so I'm not worried for the clone, but seems to be the right choice. Nothing wrong with that?

  No downside. Go ahead and clone that & make configuration appropriate (SID/IP, etc.)

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• Stupid Photoshop. Clone tool does not. That means "could not use the clone stamp because the area to clone has not been defined (option - click to set a point source)" means?

  Please help and bear with me, I can not know what you are talking about. Total newb

  Nice day!

  The Clone Stamp tool is intended to be used to paint the parts of an image on one image (the same or another).

  To do this, a sampling point must be set for Photoshop 'know' what piece to be used and which is done with the Clone tool from the selected buffer, alt-click on the space provided.

  Kind regards

  Pfaffenbichler

• I have a black stripe on the wall behind the speaker in my film.  Is there a way to remove it because I could do in Photoshop with the clone tool?

  I have a black stripe on the wall behind the speaker in my film.  Is there a way to remove it because I could do in Photoshop with the clone tool?

  AE has a clone tool.

  If the black stripe is stationairy you can use a mask to isolate a good piece of wall one drop on the original clip