Attempt to analysis of HP Photosmart 5510d error message

Similar Questions

• Photosmart 7520: error message stating unable to connect to web services

  I'm scanning my printer and get error messages saying: unable to connect to web services check the internet access. I have access to the internet and also tried to get a new IP address manual. Keeps saying try again or enter proxy. Any ideas would be greatly appreciated.

  I have used this analysis before but just suddenly get these messages

  OK I try it and see if it works. Thank you

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP photosmart c309a error message States to remove the usb device because it is not compatible

  no previous problems with printing far... error message States to remove the usb device because it is not compatible with the hp photosmart wireless photosmart c309a c309a printer.the only thing plugged into the printer is power cord... no usb device is or was plugged so I do not understand this error message. I unplugged everything and reset the printer but the printer status is offline with the same error message.

  Jorup, try to run this utility and it must diagnose the State of the printer:

  http://goo.GL/u3jDE

  Also, when you unplug the printer, remove the power cord to the back of the unit and the wall for thirty seconds, then reconnect it.

  I would like to know how it goes!

• Photosmart 8100 error message too small paper when printing envelopes.

  I am trying to print envelopes 8.75 "X 5.75" and I get an error message that the book is small. How can I fix it?  It will print on 8.5 by 11.

  Hey,.

  No problem, margen!

  I would recommend using the Deskjet 9800 driver with this printer because it also uses the PCL3 GUI language.  This print driver allows custom paper size so that you can manually configure this size management.

  To swap to another driver, please follow the steps in the thread found here.  However, instead of the driver 990c or 450 please use the Deskjet 9800 driver.  You may need to click the Windows Update button at the bottom of the printer driver selection screen to pre-populate the list thus providing this HP Deskjet 9800 driver as a selection.

  Hope this helps,

  Jason

• HP photosmart C4180 error message

  I get the error message REMOVE AND CHECK CARTRIDGE on RIGHT, I removed and cleaned and re-installed but no change. It is not printing

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the problem.

  http://support.HP.com/us-en/document/c01650872

  Have you changed your cartridges lately?

  Re-installing your software and drivers will not solve the problem. It is a hardware problem with the printer itself?

• All-in-One Photosmart 3210 error messages

  When it works the 3210 did a wonderful job. I am running Vista Home Premium on an HP Pavilion a6234x Desktop PC, automatic updates from Microsoft. Starting and restarting, I consistenly get an error as follows: "worker HPProduct - the component you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder containing the installation package "hpproductassistant.msi 'in the box below."

  I tried both of the suggested points, but the 3210 continues to be unusable. I uninstalled and reinstalled a dozen times using HP downloads Web site. Every time, the download and installation are shown to be successful and the unit is 'Ready to use'. I took care to specify (if requested) I'm on Vista Home Premium. The ink cartridges are full, it lights correctly, the paper is loaded, etc.. The HP Print diagnostic utility always displays a problem with the Print Queue. When it is fixed and I delete or don't delete pending print jobs and try to print to aqgain, the printer does not always work and goes back to work stuck in the queue for printing impression. Printing a test page also does not work. I ran my anti-virus program, Microsoft Malicious Software Removal Tool and Windows Defender, with a deep analysis and complete. All have resulted in no malware found. Any help to fix this would be greatly appreciated. Thank you!

  It was purchased in March 2006 and until a year ago, has been used on another computer running Windows XP, SP2.

  Hello

  With regard to the question of the "HPProduct Assistant - the component you are trying to use," click here to solve. As you experience the problem HPProduct Assistant, find and highlight this product HP Assistant in the window cleaning of Windows, and then select Delete. Restart your computer after you complete these steps to check if the window is no longer reappear.

  And in the issue of the print queue, try this:
  > start
  > all programs/programs

  > Accessories

  > right click on command prompt

  > select run as administrator
  > enter the following command in the command prompt window
       SC CONFIG SPOOLER DEPEND = RPCSS start = Auto

  then press on enter key on your keyboard, then exit

  Let me know if they work...

• HP Photosmart A510: Hp Photosmart A510 Error Message SD HD card

  I have a Nikon Cool Pix using a 32 GB SDHC card. I get the card access error. See owners manual error.

  I followed the instructions and formatted the card once again lose all my photos stored. Then I checked the tab on the SD card was not in the locked position.

  I have no videos on demand and only 2 pictures I deleted the rest to format the card.

  I tried the card with the printer, but also offshore at the beginning and the turn on once the card has been inserted. Nothing works! Help please!

  Thank you!

  The A510 is probably limited to 1 GB memory cards.

• Spot detector calibration for Hp photosmart 2610 error message

  Good day to all

  can someone help me out / advise me about this problem

  Thanks in advance

  Hello

  Try bypassing the calibration using the link below.

  http://support.HP.com/us-en/document/buu00657

• Re: 2575 photosmart cartridge Error Messages

  I HAVE A QUESTION I HAVE A PRINTER HP 2575 AND I WANT TO SET I WANT TO JUST PUT INK BLACK DC I JUST USE IT FOR FILES IN COLOR BUT IT SAYS INK CARTRIDGE PROBLEM COLOUR PRINTING CARTIRIDGE INSERT IN THE LEFT STALL. RP TO THE PRINTER DOCUMENTATION. WHAT CAN I DO?

  @KittyK, I'm sorry that you are experiencing this issue.

  You will need to put in a color cartridge so that the printer works properly.

  The printer will not process without the black cartridge and the cartridge color TOGETHER.

  Color cartridges mix with black to form a true black color. That's why he told you, 'insert the color print cartridge.

• Solution Center error message almost never goes away

  Whenever I start my laptop, I get an error message that says: "the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert Solution Center disk and click OK. "It is quite aggrivating because I have to stuggle through at least three attempts or more before I get the error message to finally go and not return until I restart my laptop.

  I have no idea what function the program thinks I'm trying to use; I'm not trying anything to open my laptop.  Interesting, there are a number one (1) in the window 'Source of use' of plaintiff in this error message.  I inserted the disc program and when I click on the drive, I got the other error message that basically said that '1' was not the file he wanted.  I tried to find the file, he would have wanted, found the Setup file of Solution Center - one on the CD, and one already on my laptop - but none of these files were to be accepted.

  I want to be able to start my laptop without having to run the gaunlet of sticky error messages every time.

  Please help if you can.

  MrsOwl, here is a link that may help you solve your problem:

  http://h30434.www3.HP.com/PSG/board/message?message.UID=1088

  Please let us know what happens.

• Replacement of the cartridge leads to the error message "paper jam".

  Hi - I just replaced the cartridges Photosmart 2575; error message "Paper jam", but there is no paper anywhere near the machine...

  Problem seems to be the color cartridge.

  Anyone else had this?

  Anyone know a phone number to talk to HP? Especially if it's a number in the United Kingdom?

  Thank you very much

  H

  Here is a link to double check for a paper jam.
  http://goo.GL/qZXiQ

  The number to contact HP (0844 369 0369) UK support

• Install photoshop CC Creative cloud of error message

  Hello I want to install photoshop creative cloud CC 4 attempts but I whenever I have this error message "cannot install RIP possible files. Try downloading again or contact customer (EX20)

  Hi Coralinega,

  Welcome to the community!

  It could be a problem with the admin rights, try to download the software directly from this link: http://prodesigntools.com/adobe-cc-direct-download-links.html

  Follow the instructions very Important, otherwise the download does not start.

  -Pierre

• Epson-Scanner: attempt at analysis and I get: interface: not connected, option: unknown

  attempt to analysis and I get: interface: not connected, option: unknown

  Yes, 64-bit. I downloaded the correct drivers

  Right - we have established that.  What I asked (or thought I asked, sorry for any confusion) was the seocond time:

  Is the error you receive [interface: not connected, option: unknown] from a native Windows application, you are running OR the scanner utility Epson or som another application?

  I ask because it is important to know which application is gving you the error because those who are integrated into the code, usually.  The errors mean more if you know the name of the application giving error while looking for the error itself.  Epson has what he calls, "Epson Stylus NX300 and NX305 EPSON Scan Utility" and I was trying to establish whether it is what you use when you try to scan and so what gives you the error [interface: not connected, option: unknown] you have found?

  For example, a google search for:

  the Epson scanner interface: not connected, option: unknown

  Give some success (including this conversation.)  You may need to contact Epson directly support to help with it.

• Photosmart C410 [6396F5]: Ipad recognizes my HP printer, and then displays an error message

  The printer is recognized, but displays an error and does not print

  Hello @PastorBetts.

  Welcome to the HP support forums.

  I understand that when you try to Airprint for your Photosmart C410, you get an error message.

  I would like to help.

  What is the error message you get?

  Here are some generic troubleshooting steps from apples web site.

  If you can't print to your printer AirPrint

  Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."

  • On your iPhone, iPad or iPod touch, check that your device uses the latest available IOS and the app that you print from is up to date.
  • On your Mac, use software update to update to OS X and applications that you have purchased from the Mac App Store.
  • Check with the manufacturer of your printer to see if the firmware updates are available for your printer model.
  • You can connect an AirPrint device to your network, either by bypass surgery or a direct connection to your Wi - Fi network.
  • AirPrint devices connected to the USB port on the Apple AirPort base station or Time Capsule AirPort use AirPrint. If your printer includes AirPrint, connect it directly to your Wi - Fi network or Ethernet LAN port on your Base Station to print wireless.
  • After turning on your printer, wait a few moments before trying to print. Some printers may take a minute or two after power to join your network.

  You will also find useful information in the following document.

  HP wireless printers compatible AirPrint - print on a wireless network with Apple AirPrint FAQs