Spot detector calibration for Hp photosmart 2610 error message

Similar Questions

• problem with scanning/image area for hp photosmart 2610 WIN XP

  Well well probably XP is half the problem since it is no longer supported... But I am havig problems scanning anything on my hp photosmart 2610. Area of the image go up and keeps telling me to insert my all in a disc and I evetually must use master to close the processes of HP. I tried everything to have HP on the phone (for 4 hours) and they could not uninstall and reinstall new drivers so not that I have two monitors of image digital hp running. Printing is not a problem but pulling to the top of photos and attempt at analysis of the new photos just do not work. I have the original disc of photosmart hp, but when I put it in my dvd player I get a message to put in an all in one disc I did not. I even downloaded the latest driver from HP and tried running that, but it does not say that it is alread installed... Should I just delete anything that has to do with my printet hp and then run the installation of new I removed the HP site? It makes me very nervous because I can print at least currently... If I delete everything and the installation fails, I can't live with printing capabilities. However, I want to be able to scan your photos of family, etc...

  Thanks for the help

  Robert

  Cheetah12

  Thank you for the information, he worked with a few minor changes since my system was a mess. But I would never have solved the problem without help...

  Great job

  Bob

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• HP photosmart c309a error message States to remove the usb device because it is not compatible

  no previous problems with printing far... error message States to remove the usb device because it is not compatible with the hp photosmart wireless photosmart c309a c309a printer.the only thing plugged into the printer is power cord... no usb device is or was plugged so I do not understand this error message. I unplugged everything and reset the printer but the printer status is offline with the same error message.

  Jorup, try to run this utility and it must diagnose the State of the printer:

  http://goo.GL/u3jDE

  Also, when you unplug the printer, remove the power cord to the back of the unit and the wall for thirty seconds, then reconnect it.

  I would like to know how it goes!

• Download for Adobe Captivate 9 error message

  I get this error message when I try to download the software: ' archive part of Adobe Captivate 9 (64-bit) file is missing. " You need all parts in the same folder in order to extract Adobe Captivate 9 (64-bit). "Please download all parts. How can I fix it?

  Hi, John! Thanks for joining me. I managed to do the work. I downloaded the two files: the file exe and 7z file (I think that's what it was called). The trick was to put them both in the same folder and then run the install. I'm so used to the assistants to do all this automatically for me it took me a while to understand the problem.

• Codes for the AIR installer error message

  Hello, once again,

  I found an article of the code small mistake for update of the player, so I know that it is a common practice to provide error notice.

  Where to find a list of error messages for installation of Adobe AIR on Mac OS platform? I saw the error 7 or 8 for the test early on, if I remember correctly.

  This will help us produce the best comment of the error to the user in case the AIR settles.

  Thank you

  They are in our doc of redistribution, you can get access to once you fill in the following form: Adobe AIR Runtime Distribution

  Here is the table of exit codes:

  Installer exit codes

  The Adobe AIR installer generates the following exit codes:

  Exit code	Description
  0	Successful installation
  1	Success, but the reboot required for completion
  2	User error (incorrect arguments)
  3	Term not found
  4	Failed loading of runtime
  5	Unknown error
  6	Installation cancelled
  7	Failed installation
  8	Setup has failed; update already in progress
  9	Setup has failed; application already installed

  As you will notice, the exit code 7 is really just a "catch-all" and not particularly useful.  It may also be useful to refer to the runtime error codes from time to time.  You will find them here: execution errors

  Thank you

  Chris

• Photosmart 7520: error message stating unable to connect to web services

  I'm scanning my printer and get error messages saying: unable to connect to web services check the internet access. I have access to the internet and also tried to get a new IP address manual. Keeps saying try again or enter proxy. Any ideas would be greatly appreciated.

  I have used this analysis before but just suddenly get these messages

  OK I try it and see if it works. Thank you

• Photosmart 8100 error message too small paper when printing envelopes.

  I am trying to print envelopes 8.75 "X 5.75" and I get an error message that the book is small. How can I fix it?  It will print on 8.5 by 11.

  Hey,.

  No problem, margen!

  I would recommend using the Deskjet 9800 driver with this printer because it also uses the PCL3 GUI language.  This print driver allows custom paper size so that you can manually configure this size management.

  To swap to another driver, please follow the steps in the thread found here.  However, instead of the driver 990c or 450 please use the Deskjet 9800 driver.  You may need to click the Windows Update button at the bottom of the printer driver selection screen to pre-populate the list thus providing this HP Deskjet 9800 driver as a selection.

  Hope this helps,

  Jason

• HP photosmart C4180 error message

  I get the error message REMOVE AND CHECK CARTRIDGE on RIGHT, I removed and cleaned and re-installed but no change. It is not printing

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the problem.

  http://support.HP.com/us-en/document/c01650872

  Have you changed your cartridges lately?

  Re-installing your software and drivers will not solve the problem. It is a hardware problem with the printer itself?

• Acrobat Pro for MAC read-only Error Message

  Lately I ve been getting the following error message when you try to do a "save under" in my Dropbox folder located in the viewfinder of my Mac (well that during the recording of my "Documents" folder on my hard drive there is no problem; btw, I m not on a network, it s just me and my Mac and my wi - fi) : "the file may be read-only or another user can open. Please save the document under a different name or in a different folder. "Any help? Thank you.

  Hi ramonolivencia,

  Acrobat X is not compatible with Mac 10.11. It is not possible to predict how the application will behave.

  Please use the application in the compatible environment.

  Kind regards

  Nicos

• Regionalization reset for my photosmart 2610

  I bought the printer in the United States and Italy.  I bought a new HP cartridges in Italy who will not work until the region is reset to zero.  Looking at the answers on the same subject, I called HP support in the United States and Italy, and after 1 hour and 1/2 have been absolutely no help.  I was transferred several times.  I can't believe that this procedure should be so difficult or even justify a technical appeal.  Why is there no instructions on the Web site for this?   Can you help or get HP to support their own product?

  I even spoke with a supervisor who said he found someone to help him, and then he transferred me to the menu of consumer support.  It's price winner support, seriously?  There, someone can actually help me?

  Updated: 1 hour 43 minutes and 20 minutes waiting, I still remember another technician who then told me it's an obsolete product and they can't.  It took 1 hour and 43 minutes for this answer.  If I don't get this solved, you can be sure that this product is not replaced with another HP.

  Sorry for the trouble.  Support centres should be able to take care of this for you.  I just send you a private message to ask for your contact information.  Once I have, I'll have someone contact you to resolve this problem.

  Thank you

• Can someone decode this for me kernel panic error message please?

  I had some problems recently with my 13 "MacBook Pro, Early 2011. I was able to resolve most of them between the forums and the Genius Bar, but there is still a persistent that even the Genius Bar can't seem to understand. Often, my computer freezes and restarts itself, and recently I had the window "your computer restarted due to a problem". I know kernel panic can be software or hardware related. I just wiped my hard drive (third-party SSD), reinstalled the OS X and restored from a Time Machine backup (but doesn't not restore any network or personal settings, as I was told by the Genius Bar help ensure no bugs/corruptions that affected my machine were installed). A complete hardware and software diagnostic was managed by Apple, where the only problem they found was that they could not read my hard drive and I have recommended replacing the hard drive slick, that I had let them. However, my problem: I have yet to have another random reboot with the new cable, but I am always starting gel, delay and slow speeds. I understood the message of the most recent kernel panic error, but I have little idea how do make sense. If someone could decode it for me and let me know what you think caused the kernel panic, I would be grateful!

  Quick notes (it may or may not be useful): I also installed new third-party RAM me, updated 4-8 GB. I also have problems taking videos on Photo Booth. When I do, app causes my computer to lag, and the video does not correctly record (late of video development, multicolor screen during playback, not only audio video, etc.). Check the video card came back clean well.

  Anonymous UUID: 52761E71-2C6C-A4F0-6320-518D613A8E30

  Game Aug 11 23:05:12 2016

  Panic report *.

  panic (cpu 0 0xffffff802a3ce6fa appellant): Kernel trap at 0xffffff802a10e2f6, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0XFFFFFF8511DEB5C0 CR3: 0X000000013ABE4067 CR4: 0X00000000000626E0

  RAX: 0X00000000BA769D69, RBX: 0XFFFFFF80FB4FF400 RCX: 0XFFFFFF80FB4FF408 RDX: 0 X 0100000000000201

  RER: 0XFFFFFF8133CD39F0, RBP: 0XFFFFFF8133CD3A60, IHR: 0XFFFFFF80FB4FF000, RDI: 0XFFFFFF822804401C

  R8: 0XFFFFFF8511DEB5C0, R9: 0XFFFFFF8526E83F60, R10: 0XFFFFFF8228044128 R11: 0X0F0F0F0F0F0F0F0F

  R12: 0XFFFFFEB29124F000, R13: 0XFFFFFF80FB4FF000, R14: 0X0000000000000F64 R15: 0 X 0000000000000001

  RFL: 0 X 0000000000010206, RIP: 0XFFFFFF802A10E2F6, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0xffffff8511deb5c0, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 1

  Backtrace (CPU 0), frame: return address

  0xffffff8133cd3680: 0xffffff802a2dab52

  0xffffff8133cd3700: 0xffffff802a3ce6fa

  0xffffff8133cd38e0: 0xffffff802a3ec563

  0xffffff8133cd3900: 0xffffff802a10e2f6

  0xffffff8133cd3a60: 0xffffff802a3425af

  0xffffff8133cd3ac0: 0xffffff802a340f47

  0xffffff8133cd3b00: 0xffffff802a3435eb

  0xffffff8133cd3b30: 0xffffff802a348057

  0xffffff8133cd3d00: 0xffffff802a34debe

  0xffffff8133cd3f20: 0xffffff802a3cecef

  0xffffff8133cd3fb0: 0xffffff802a3ec475

  Corresponding to the current thread BSD process name: Google Chrome

  Mac OS version:

  15G 31

  Kernel version:

  15.6.0 Darwin kernel version: Thu Jun 23 18:25:34 PDT 2016; root:XNU-3248.60.10~1/RELEASE_X86_64

  Kernel UUID: B5AA8E3E-65B6-3D0E-867B-8DCCF81E536C

  Slide kernel: 0x000000002a000000

  Text of core base: 0xffffff802a200000

  Text __HIB base: 0xffffff802a100000

  Name of system model: MacBookPro8, 1 (Mac-94245B3640C91C81)

  Availability of the system in nanoseconds: 82778692404226

  last load kext to 18326096476143: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7facfbd000 size 32768)

  Finally unloaded kext to 18501757170760: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7facfbd000 size 32768)

  kexts responsible:

  com Sophos.kext.SAV 9.4.52

  com Sophos.nke.SWI 9.4.52

  com.rim.driver.BlackBerryUSBDriverInt 0.0.68

  com Apple.filesystems.smbfs 3.0.1

  com.apple.driver.AudioAUUC 1.70

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  3.12.8 com.apple.driver.ApplePolicyControl

  com Apple.Driver.pmtelemetry 1

  com.apple.driver.AppleHDA 274.12

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMikeyDriver 274.12

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.6f1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.driver.AppleIRController 327,6

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.iokit.SCSITaskUserClient 3.7.7

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleFWOHCI 5.5.4

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.driver.DspFuncLib 274.12

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.3

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.iokit.IOBluetoothFamily 4.4.6f1

  com.apple.driver.AppleHDAController 274.12

  com.apple.iokit.IOHDAFamily 274.12

  com.apple.iokit.IOAudio!

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Bus crush: MacBook Pro, Apple Inc., 22.1

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM2070

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: IR receiver

  Serial ATA Device: Crucial_CT480M500SSD1, 480,1 GB

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  Model: MacBookPro8, 1, MBP81.0047.B2A of BootROM, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, MSC 1.68f99

  Network service: Wi - Fi, AirPort, en1

  Graphics card: integrated Intel HD Graphics 3000, Intel HD Graphics 3000,

  Model: MacBookPro8, 1, MBP81.0047.B2A of BootROM, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, MSC 1.68f99

  Graphics card: integrated Intel HD Graphics 3000, Intel HD Graphics 3000,

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1333 MHz, 0x859B, 0x435434473353313333394D2E4D3136464B44

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: Crucial_CT480M500SSD1, 480,1 GB

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM2070

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: IR receiver

  Bus crush: MacBook Pro, Apple Inc., 22.1

  I'm not sure regarding the panic itself 100%, but the symptoms you describe, I'll try to put first the original RAM if you, as a test. Also try a SMC reset: reset the management system (SCM) controller on your Mac - Apple Support.

• All-in-One Photosmart 3210 error messages

  When it works the 3210 did a wonderful job. I am running Vista Home Premium on an HP Pavilion a6234x Desktop PC, automatic updates from Microsoft. Starting and restarting, I consistenly get an error as follows: "worker HPProduct - the component you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder containing the installation package "hpproductassistant.msi 'in the box below."

  I tried both of the suggested points, but the 3210 continues to be unusable. I uninstalled and reinstalled a dozen times using HP downloads Web site. Every time, the download and installation are shown to be successful and the unit is 'Ready to use'. I took care to specify (if requested) I'm on Vista Home Premium. The ink cartridges are full, it lights correctly, the paper is loaded, etc.. The HP Print diagnostic utility always displays a problem with the Print Queue. When it is fixed and I delete or don't delete pending print jobs and try to print to aqgain, the printer does not always work and goes back to work stuck in the queue for printing impression. Printing a test page also does not work. I ran my anti-virus program, Microsoft Malicious Software Removal Tool and Windows Defender, with a deep analysis and complete. All have resulted in no malware found. Any help to fix this would be greatly appreciated. Thank you!

  It was purchased in March 2006 and until a year ago, has been used on another computer running Windows XP, SP2.

  Hello

  With regard to the question of the "HPProduct Assistant - the component you are trying to use," click here to solve. As you experience the problem HPProduct Assistant, find and highlight this product HP Assistant in the window cleaning of Windows, and then select Delete. Restart your computer after you complete these steps to check if the window is no longer reappear.

  And in the issue of the print queue, try this:
  > start
  > all programs/programs

  > Accessories

  > right click on command prompt

  > select run as administrator
  > enter the following command in the command prompt window
       SC CONFIG SPOOLER DEPEND = RPCSS start = Auto

  then press on enter key on your keyboard, then exit

  Let me know if they work...

• Attempt to analysis of HP Photosmart 5510d error message

  [Original title: John Hastings]

  "" When I try to scan from my HP Photosmart 5510 d series to my computer, I get the following message "HP scan application is currently in use with another task or another user on this computer, wait until it is finished, and then try again" there is no other user I tried to uninstall and reinstall the printer but still don't scan?

  Hello

  1. which version of the operating system are you using?

  2 did you do changes on the computer before the show?

   

  I suggest you to see the site mentioned below:

  HP Scanjet Scanners - fix the error "Application is currently unavailable or currently in use. "Close open programs and try" when opening the HP Director

  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=303634&prodTypeId=15179&objectID=c01271875.

• VProtect do nothing for me but displays error messages

  Protect the V shows he has encountered an error, I have to let him do a report and then send it. It happened 7 days-is one never respond or can I rezine my life to send error reports for ever?

  Protect the V shows he has encountered an error, I have to let him do a report and then send it. It happened 7 days-is one never respond or can I rezine my life to send error reports for ever?

  I think VProtect belongs to AVG Security.

  Using AVG?

  If so, try http://free.avg.com/us-en/support

  Kind regards...