Attempt to scam "Event Viewer".

Similar Questions

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• Cannot install McAfee on Windows XP. Errors with "Event Viewer".

  Hello, I am writing on behalf of a client.

  The customer has been in touch with the people of McAfee support for four days and they are still not able to install the antivirus program due to errors with Event Viewer. The people of McAfee asked the customer to reach the MS Support since then, as they say is a Windows problem.

  The event viewer contains errors in the Service Control Manager,

  DCOM, NetDDE.

  That's my problem, put support in for me.  Some fo include errors in the event viewer:

  DCOM got error "the service did not to start or control request in a timely fashion." try to start WSearch service with arguments "" to start the server:

  {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

  Details Product: Windows operating system ID: 7000 Source: Service Control Manager Version: 5.2 Symbolic name: EVENT_SERVICE_START_FAILED Message: The %1 service failed to start due to the following error: %2     Explanation (SCM, Service Control Manager) could not start the service specified, probably because the service is not configured correctly.     User action Do one or all of the following conditions: Check the error information displayed in the message. Check that the service password has not expired. Verify that the service is in the right place. Check that the service is not infected with a virus. To view the WIN32_EXIT_CODE as SCM error when you try to start the program, at the command prompt, type application of SC name of the service The displayed information can help you troubleshoot the possible causes of the error. If the WIN32_EXIT_CODE is zero, SCM did not attempt to start the service because the error was detected first.         Version: 5.0 Symbolic name: EVENT_SERVICE_START_FAILED Message: The %1 service failed to start due to the following error: 2%.     Explanation (SCM, Service Control Manager) could not start the service specified, probably because the service is not configured correctly.     User action Do one or all of the following conditions:

  • Check the error information displayed in the message.
  • Check that the service password has not expired.
  • Verify that the service is in the right place.
  • Check that the service is not infected with a virus.
  • To view the WIN32_EXIT_CODE as SCM error when you try to start the program, at the command prompt, type
  
  application of SC name of the service
  The displayed information can help you troubleshoot the possible causes of the error.

  If the WIN32_EXIT_CODE is zero, SCM did not attempt to start the service because the error was detected first.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  ++++++++++++++++++

  Details Product: Windows operating system ID: 206 Source: NetDDE Version: 5.0 Component: System event log Message: Listen failed: %1     Explanation The computer expected data from another computer, but not the not received. The other computer does not send, or the thread on this computer that listens to the data has encountered an error.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

• Administrative event viewer

  while trying to figure out why my system suddenly takes a very notable longer amount of time to connect to the internet, I came across "Event Viewer". I am far from an expert. I clicked on Administrative event viewer. It shows more 9 000 errors of today. Again, I know just enough about the computer system, to screw it up, to try something that I know nothing. Can I get help from this site?

  I would not consider 9 000 errors in a normal day, but I'm not an MVP.

  My system of each power on/off cycle I have 3 errors and 2 warnings (warnings and errors are not the same) and they are the same each time:

  

  Since I looked into errors, I know they come from attempts by the system to obtain a network address when other things on the system are not quite ready yet (since the system is still to come and not quite 'ready').  Then, repeat these steps and when everything is ready the system managed to obtain a network address and everything is good for the rest of the day - no more errors or warnings for the entire day.  The warnings are when the system shuts down and the Services are stopped.  There is probably not much I can do to 'fix' people, but since I understand what they mean, and I did more during the day, they cover not me - I know what they mean.

  No event in the Event Viewer log must defy explanation and it is possible that some of them could be ignored.  I have that 3 673 administrative events for the last 7 months (lots and lots and lots of reboots) and you have 9000 per day and don't think it's an indication that something might not be quite right?

  I don't see how someone can say that your event can be ignored without knowing what they are unless you are just in the habit of ignoring the events.  I wouldn't be able to stand or to tolerate 9000 events in one day.

  You have learned that unchecking the yellow displayed in Autoruns "File not found" is not your system run faster.  Since these are just references to a path/file/folder on your system that doesn't exist more there is nothing for them to do, nothing going to happen which can consume any time.  And you can see them again the next time you reboot your system.

  Pink/red Autoruns entries are usually things with third party programs that the Publisher didn't bother sign digitally... Description and the editor fields are often empty - probably not a problem.

  For start-up problems, the best place to watch in Autoruns is the tab connection since that is where will be your startup items and from there you can methodically clear things, restart your system and see what things look like:

  

  If your system is simply slow start and then runs properly the rest of the time you should watch all your startup items and chances are very good that there are many things that can be disabled - at least to test.

  I'll be sure to do a system restore point (for security) before you make permanent changes so in case things get worse, you can undo the changes and start over with your troubleshooting.

  Some people like to use the built in the msconfig program to see what that their startup items, and clear that they do not have.

  Here's what looks like on my system msconfig Startup tab:

  

  I have no startup items to worry, but you have some people who need/want and no one can tell you what you might be able to remove without seeing a list.

  I'm not a Microsoft MVP, but I'm still 9 administrative errors event someday I'd find them, come with an explanation to know what they mean and making an effort to fix them if I could.

  I wouldn't consider 9000, tens of thousands or millions of errors a day somehow to be normal.

• How to fix a client SSL key private credential error code in the event viewer

  Hi people,

  I hope someone can help. I am currently using Windows 7 Professional 64 bit, updated with the latest updates from Microsoft.

  I get the following error message, ()every 5 minutes exactly) in the Event Viewer administrative, computer management.

  "A fatal error has occurred when trying to access the private key SSL client credential." The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003 "

  It began on October 14, 2014. There are now more than 40,000 of the codes of this edition.

  A sample of the log data is as follows;

  Log name: System
  Source: Schannel
  Date: 18/10/2014-20:54:40
  Event ID: 36870
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: AP1
  Description:
  A fatal error occurred when attempting to access the private key SSL client credential. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003.
  The event XML:
  
   
     
      36870
      0
      2
      0
      0
      0 x 8000000000000000
     
      133003
     
     
      System
      AP1
     
   
   
      customer
      0x8009030d
      10003
   
  

  I looked at all the suggestions online and have found nothing of what is specific to this problem for windows 7 and how to solve it. I would be grateful if someone could guide me in the way to solve the problem.

  Thanks in advance.

  Tom

  Dear Isha,

  Thanks for your follow-up. After spending considerable time on the issue, I stopped just by using the function of collective housing, which heals many error codes. It is redundant to a standard network configuration and is not worthwhile. Since Windows 10 deletes the function of group living, I'm not sure that I need to spend time on this...

  I have also had also removed the bad machine key and senior partners of information in the directory of network of peers, which seems to have solved the problem.

  Thanks for your thoughts.

  Tom

• My computer has more than 26000 events in Event Viewer

  My computer has more than 26000 events in the case where the viewer and I got a call this morning saying I'd let microsoft engineers have control of my computer do it for me. Should I trust this guy or is there no real problem?

  NO! DO NOT TRUST THIS GUY HERE!

  Microsoft will never call you without having you asked them to call.

  It is a scam! Don't fall for it!

  Any observer of events read here: http://windows.microsoft.com/en-us/windows7/open-event-viewer

  Concerning
  Julia

• Errors & warnings in the event viewer on windows 7 Desktop compputer

  I was contacted by someone with a foreign accent (of Bangladesh) telling me that he represents Microsoft and wants only $125. get rid of errors and warnings in Event Viewer.  When I said no... they went down to $49. Can I solve this problem?

  It's a scam.  Ignore it.

• I just installed win 7 Ult 7 days. In the event viewer, I got 1000 errors and I was wondering where I can get help? TY

  I just installed win 7 Ult 7 days.  In the event viewer, I got 1000 errors and I was wondering where I can get help? TY

  And the list continues to become more mistakes as the months go bye.  Usually after 3 monts, my PC slows to a crawl, and I have to reinstall Windows & Ultimate!

  It is very annoying.  I'm not the smartest when it comes to the PC, but I know enough when I have a problem.

  Now, while I was with PC Cleaner Pro, I allowed a representative to take control of my PC to help set, and he went into the event viewer and showed me the error 1007 in

  the event viewer.  He told me that only a technician 35 Microsoft could fix tis problem.

  I would like to know how to solve these problems myself.  If that means classes or tests, I'm ready to get there!

  But for now, I just want to know how to clean and fix the errors in the event viewer

  So if you could tell me please small whet you need to me to help him with this problem, I'm ready

  It's really annoying tio do reinjstall windows every 3 months.  So if you can help, I would be very happy VERY MUCH!

  Sincreley,

  Joseph M Hart

  Errors and warnings in the event logs are not usually a sign of a major problem.

  Unfortunately, there are many technical support providers who refer clients to the event log in order to convince them to pay for questionable services.

  Use of cleaners and Tune up utilities is not recommended. They can often cause problems.

  Use the construct in Windows utilities

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Ensure that all remote access program is deleted from your computer.

  Use a search engine to find information on all the events that occur frequently, specifying the event id and source, for example search for "eventid 512 capi2. Try to avoid scam sites that are always asked by this kind of research. Stick to sites of Microsoft or somewhere like www.eventid.net which is a good source of free information.

• DHCP in the event viewer

  My Event Viewer I get error1003 DHCP. My computer cannot renew its address from the DHCP server. I contacted HP 10 times on that support and they have no idea. It is only in my event viewer and I have no problem to the internet. Also, I contacted my internet provider and they said that the problem was not there.

  Thank you for your answer, but I have a pavillion a1710n desktop. It is not witeless.i get the computer cannot renew the dhcp server address.

• application source Event viewer event id 1000 error

  Dear,

  I am running windows server 2008 r2 in my business and recently started Active Directory to freezes from time to time, and im not able to use it, below that is the event that is logged in the event viewer:

  can you please help as im not able to use AD more...

  

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Event ID PnP 10317 event is logged in the event viewer

  Network device on the OEM Win 2012R2 server loses connectivity.

  General information of the event viewer:
  Miniport had the fatal error event: the miniport has detected an internal error.

  Help only reset and the problem does not occur in WIN7.

  Maybe somebody has an idea about this problem?

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to change the ID of 'security' other than 'NULL SID"in the"Event Viewer"on WinSrv2008

  Hello

  I'm working on the Windows Server 2008 system.

  I would like to be displayed in the event viewer ' ' the correct ID 'security' (it is always displayed as "SID NULL" instead of the right domain/username) for the logon task (event ID: 4624).

  For the task of the closing session, the security ID is displayed correctly.

  Thank you for your answers

  Hello

  The forum Microsoft Community are for consumer issues. Windows Server issues should be posted in the TechNet Windows Server forum, where they specialize in Windows Server.

  Thank you

  David

• Event Viewer: the initializer for type for 'advancedsetttings' threw an exception

  I get an error "the initializer for type for 'advancedsetttings' threw an exception" when trying to view the subscriptions in the event viewer.  The machine is a windows 2008 server.  It worked before but just stoped working.  I tried loging in as a local administrator on the machine account and has not worked.  Also, it does work with an account that is a domain administrator.  That everyone knows, or knows how to solve this problem?

  Thank you.  With the help of the question please repost the question in Forum Windows Server

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

• Add the windows firewall with the security log for windows 2008 Event Viewer

  Hi all

  I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.

  As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.

  Is anyway to add this in Windows 2008?

  Your help is very appreciated.

  BR/WT.

  Hi all

  I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.

  As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.

  Is anyway to add this in Windows 2008?

  Your help is very appreciated.

  BR/WT.

  Best place to get the most appropriate response is technet...

  Please repost this under, http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

• Error code (51) of attachment in Event Viewer

  I keep getting error messages (code 51) and information in my event viewer, along w / other types (it's for a later date), which, in the description

  detect error on device\Harddisk3\D during a paging operation. I found some info saying that Seagates default external hard drive will be Hibernate causes the error. So in the right Manager device - I clicked the usb hub of this hard disk, clicked on management of the power supply and checked the box that says let the computer put the player in standby to save power. It does not solve the problem. from what I can gather is that nobody knows what the "D". I have an internal hard drive that was original crane operators and added the Seagate FreeAgent Desktop drive that is configured without any partition, then formatted as NTFS system volume. Maybe that's the problem? It is an old system w / a few updates in the RAM memory and sound card, 2 GB (RAM), processor Intel Pentium clocked at 2.66 GHz, all wrapped together and became the HP Pavilion 764n. That all sums it up unless we need more information to understand this. Thanks in advance for any help, that everyone is careful not to lend. :)
  Patient with gratitude,
  Wndsurfr61
  PS Yes I know, just upgrade the whole system!

  Hello

  You forgot to mention which version of Windows you are using?

  Generally, the event 51 ID can be ignored safely.

  See the following article for detailed information.

  Information about event ID 51:
  http://support.Microsoft.com/kb/244780

  Concerning