audio, click on issues when publishing

Similar Questions

• Captivate 6 make issues when publishing flash only

  Hello

  I wanted to ask if someone else has the same problem I feel when I publish my 6 captivate projects:

  Question:

  Project consists of 46 slides.  No advanced actions.  Several flight path images and text captions are across multiple slides. capture software

  During the publication of a USB key or my office then preview I have rendering problems and these vary from one part of the software that I am capture does not appear not at all to my models model slide endangered.  Whenever this happens I try to publish for flash 10 and ctick strength republish all the slides - sometimes this corrects the problem sometimes is not.  So I try to publish for flash 9 force republish all the slides sometimes this fixes the problem sometimes is not.  It's just for the blind I have to finally publish 4 to 5 times before I am.  Then of course, it's extremely frustrating when I have to make changes to the project and republish.

  Also note that the display in the web browser has the same question.

  Think I'll have to revert to captivate 5.5, which is such a shame as I really like some of the new features of 6.

  Does anyone have any ideas as to why this could happen?

  I have attached two discharges of screen - where the screen is rendered wrong and another where I crossed my fingers and toes and republished and the screen has been made correctly:

  

  

  Thank you

  Ali

  Hi all

  Adobe have recognized a problem concerning the projects with the borders where if you have any overlaping smartshapes on the edge of a slide area there are problems with your edge on your project, once published and / or in the Web browser.  Noted a bug with Adobe.

  A solution is to position not smartshapes outside the area of the landslide.  Or that I also found if - rather than rework my projects by inserting a blank slide that shows a fraction of a second before the slide containing the landslide area outslide objects also corrects the problem.

  Ali

• How can I get audio to not start when the button is clicked?

  I am new to adding audio to slides, buttons, click boxes.  Import the recorded voice on the overall slide of files sounds easy enough.  However, there are several buttons that display a legend I want audio to not start when the button is clicked.  I added audio just for this button, but it starts when the slide begins.

  How can I get audio to not start when the button is clicked?

  Hello

  Audio playback when the assigned object with the audio appears. That's why hear you when the button appears.

  Try to assign audio instead to the object that is displayed when you click the button. Perhaps the legend.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Mute audio when published

  It is perhaps a matter of substance, but I'm not exactly a newb and this is why mystified.

  I was free from sovereign wealth funds, no prob, audio is fine.

  I now have a. CP file has audio silent when published. I don't see any parameters global tahgt woud have disabled in audio. I tried some re-import audio... no cookie.

  Audio appears in the slides and plays fine in edit mode.

  I have created a new. CP and imported an audio file. He published very well with audio.

  It's a project... just audio does not include in the published version. Am I missing something really basic? I have no audio stiopping interactions. Audio is enabled on the calendar icon...

  I'm stumped...

  Hello

  Stupid question, but stupid things sometimes happen: you can check publication settings (in preferences, project): is "Audio Include" active?

  Lilybiri

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• This program has known compatibility issues when I try to install sql server 2008 in windows 7 X 64

  I use windows 7 (X 64), and when I try to install sql server 2008 I have this message & can not install it:

  ""

  This program has known compatibility issues:

  Check online to see if solutions available on the microsoft website ara, if we find solutions, windows will automatically display a Web site that lists the steps, you can take.

  Program: Microsoft sql server 2008

  Publisher: Microsoft

  When the sql server Setup program is finished, you must apply the service pack of sql server 2008 1 (SP1) or a later service pack before you run sql server 2008 on this version of windows

  Looking for online solutions run program cancel

  ""

  And I check online for solutions & recommended program installation, but also the same message appear, so please help me, how can I fix

  Hi DoudyEwais,

  1. How do you try to install SQL server 2008 on the computer?

  2. did you of recent changes on the computer?

  I suggest that you try to install the program using compatibility mode by running the program compatibility issues

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  List of known issues when you install SQL Server on Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/955725

  If the previous step fails, then after your query in the SQL server forums by using the link below.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Flash file works great as a .swf on desktop but falls when published as a .apk

  My flash file works great as a SWF on the desktop but falls when published as an apk. When I run the application, the start menu appears as it should, but the Start button does not work. The trouble is that credits button works fine... «I also won an error warning that says: "" warning: library path "$(AppConfig) / ActionScript 3.0/libs/11.0/textLayout.swc" is not resolved to a valid file.» " Told me that maybe I had not clicked on"merged into code"but after trying it, it doesn't seem to change anything. Anyone have any ideas?

  Here are the files that I use.

  QuipQuiz for Android.apk - Google Drive

  QuipQuiz for Android.swf - Google Drive

  ActiveQuizCS4.fla - Google Drive

  Any help anyone can offer would be greatly appreciated.

  Note: just realized that I am also a separate warning on the publication that says: "Warning: Application has not specified its requirements for authorization in application.xml"

  I just had this problem with an older file created in Flash. If you go to file > settings ActionScript... Animate will open the Advanced ActionScript 3.0 settings dialog box. Below the initial settings, you will see 3 tabs: Source path, library path and Config constants. Click the library path. He'll show CFCS and ANE files or folders. Select each line, and click the sign - off. When I published again, I don't have the error.

• How can I interrupt audio on the slide when the user selects the wrong answer

  Hello world

  I tried to find a way to pause audio into a slide when the user does NOT click on the click box.

  I put a text caption, an audio file (1) and click box that has an audio (2). The user must choose a suitable location on the slide, if they err, a legend, failure, which includes an audio object (2) is displayed. The problem occurs when the user wants to answer the question before the end of the audio (1). If they get the right answer that's fine, but if the answer is incorrect, the two audio files overlap. I have a recon, I'm looking for a solution where audio (1) is paused or stopped if the user gets the wrong answer. Could someone me referring to the best way to overcome the problem?

  Why not replace the slide with an Audio statement audio play on enter for the slide?  And then you will need a box of extra click that covers the entire slide, under the present click box and attaches an action standard success him "Stop audio triggers. No legend of failure, nor the fact that for this second click box.

• Captivate 8 - video integration problems. Video won't play Web server when published under the title of HTML5. When to play the video it works not embedded.

  Captivate 8 - video integration problems. Video won't play Web server when published under the title of course HTML5 and video is selected to play in the same screen. Play video it works only in a new window. The problem is the customer's requested integrated video and it shows as an option in Captivate 8. In addition, the video screen is not at the same place on the screen, the image moves to the top of the browser window in Internet Explorer. Graphics problems appear ONLY in IE and Chrome for PC. We have updated browsers, installed all updates to Captivate 8 etc.

  The issue seems to be with internet explore. The url is *.mp4, if IE browser opens Media player in a new window to read the files.

  Workaround solution:

  Instead of using the interaction of the Web object, you can use a Web object (objects-> Web) site in the menu object.

  After insertion, select the code incorporated in the style of the real property section. (Screenshot below)

  

  Encapsulate the url in an HTML video tag and use it as input.

  Input samples:

  https://{website-Address}/VIDEO1. MP4 type = "video/mp4" >

• semicolon expected before charger when publishing class Flash Bannerads Document

  got the semicolon expected before charger when publishing Flash Bannerads Actionscript in the document class error

  also is it OK to Bannerads Actionscript.

  package {}

  import flash.display.Sprite;
  import flash.events. *;
  import flash.net.URLLoader;
  import flash.net.URLLoaderDataFormat;
  import flash.net.URLRequest;
  
  SerializableAttribute public class BANNERADS extends Sprite {}

  public void BANNERADS (): void {}
  var PHOTO: Loader = New Loader();
  PICTURE.addEventListener (Event.COMPLETE, onLoaded);
  var LOADER: URLLoader = new URLLoader();
  LOADER.addEventListener (Event.COMPLETE, getdata);
  LOADER.dataFormat = pouvez;
  var IMAGEURL: String = "";
  var NAVIGATEURL: String = "";
  var ADVERTISERURL:String = "";
  LoadASP();
  }
  public void LoadASP (): void {}
  var applicant: URLRequest = new URLRequest ("BANNERADS." "") ""ASP");
  requester. Method = URLRequestMethod.POST;
  LOADER.load (requester);

  }
  public void getdata(evt:Event) {}
  var loader2: URLLoader = new URLLoader (Event.target);
  loader2. DataFormat = pouvez;
  var IMAGE: URLRequest = new URLRequest (loader2.data.IMAGEURL);
  ADVERTISERURL = loader2.data.NAVIGATEURL;
  PICTURE.load (IMAGE);
  addChild (PICTURE);
  LoadASP();
  }
  public void onLoaded(evt:Event) {}
  PICTURE.addEventListener (MouseEvent.CLICK, onClick);
  }
  public void onClick(evt:MouseEvent):void {}
  navigateToURL (ADVERTISERURL);
  }
  
  }

  }

  See if you do New in new corrects the error...

  var PHOTO: Loader = New Loader();    --> var PHOTO: Loader = new Loader();

• The skin is cropping of content when published

  I created a project of 1200 x 700. When published the it will come out as 1200 x 700 but cover the controls of the skin on the 25 and 26 pixels between the content at the bottom of the screen. It should publish 1200 x 700 additional content 25-26 pixels for the controls of the skin down. I've never had happen before and for the life of me I can't understand why it's now or how to fix it.

  Hi Brett

  Have you tried to double check to see that the borders are turned on? That's what provides the extra room.

  Click project > skin > borders tab and check 'See the border' has a check box.

  See you soon... Rick

• do not click on the menu that appears when I right-click my taskbar, such as the right click menu disappears when I move the mouse the right click menu

  PROBLEM: CONTEXT MENU DISAPPEARS WHEN YOU TRY ON THE LEFT, CLICK AN OPTION

  Hello
  I'm using Windows 7, and I could always
  go to my taskbar and right click
  Icons and active icons, bring to the top
  the list on the right click on the standard Menu.

  PROBLEM
  As soon as I moved my mouse away from
  the background of windows 7 taskbar to go a couple
  millimetres above on the left, click an option in
  I opened with my right click context Menu
  The whole Menu disappears, and it happens in
  Firefox version 29.01, other programs in Firefox,
  and others such as Skype.
  When I was running Firefox 28
  I didn't have this problem, can you help out me.
  Thank you
  Kev Borg

  PROBLEM
  MAKE ONE CLICK RIGHT MENU DISAPPEARS WHEN YOU MOVE YOUR MOUSE TO THE LEFT, CLICK ON A MENU OPTION IN THE RIGHT CLICK MENU.

  'YOU can not because WHEN YOU MOVE YOUR MOUSE TO THE MENU YOU JUST a RIGHT CLIC ON OPEN DISAPPEARS before you HAVE a CHANCE TO CLICK LEFT of YOUR CHOICE. "

  SOLUTION
  [ 1] GO TO control PANEL AND click HERE FOR the VIEW MENU
  [ 2] GO to "EASE of ACCESS CENTER" AT the TOP.
  [ 3] LEFT CLICK ON the MENU ITEM "theEASE of ACCESS CENTER.
  [ 4] AFTER YOU are a LEFT CLICK ON 'EASE of ACCESS CENTER' seems.
  [ 5] LOOK down THE LIST UNTIL YOU FIND to "MAKE THE MOUSE EASIER to USE".
  [ 5] THE UPPER SHOWS YOU HOW to CHANGE YOUR MOUSE COLORS ETC.
  [ 6] SCROLL DOWN UNTIL YOU SEE THIS TOPIC "MAKE IT EASIER to MANAGE WINDOWS".
  [ 7] UNDER this MENU, there is check.
  "ACTIVATE a WINDOW BY HOVERING over IT WITH YOUR MOUSE"
  

  [8] ARE OF COURSE IS NOT A CHECK MARK IN THIS BOX TO OPTION, IS THERE A CHECK IT AND APPLY AND CLICK OK TO SAVE.
  

  And now, you should have no more problems with your right click Menu disappears when you move your mouse over the menu left click on a menu item on a right click menu.

  SOLUTION SOLVES THE PROBLEM.

  Thank you and I hope this answer help all the other people who have had this frustrating problem.

  was soon KiwiKev

• Windows Movie Maker-legends are incomplete when published in the final movie

  My captions are incomplete when published in the final movie... :(

  Hello everyone.

  I use Windows Movie Maker to create a photo slideshow set to music. In addition, each photo has a caption.

  Here's my problem:

  Some photo captions are messy when I publish the movie. For example, "TCS 1999" shows as "SDC 199" in the published version, even if "SDC 2000" remains the same in the published version. " Not every picture is affected, but it is irritating.

  I would appreciate anyone's insight into this matter.

  Thank you! :)

  Hi MindyJane15

  
  I suggest refer you to the links below and check if the information provided will help you solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Add-movie-titles-and-credits-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

   

  I hope this helps.

• Performance issues when coming out of sleep

  I recently built a gaming PC. On Christmas day, I finished putting the thing together. It has an Intel i7-4790 CPU running Intel HD Graphics, 8 GB of Corsair Vengeance RAM, an Asus Z97 - A Mobo and a 2 terabyte Seagate HDD. I installed Windows and put everything in place. Then a week later, my MSI GTX 970 arrived in the mail.

  So, I take the thing to sleep and decreases the performance of the whole thing. Videos YouTube stutter, simple as games fight of World of Tanks to run at its usual rate of 60 fps. To avoid this, I simply restart my comp and then it works fine. performance is back to normal.

  A few weeks, Windows gave me a message on one of the Nvidia drivers causing performance issues when you wake up from sleep. I don't think a lot of it and rejected it. I'll try to reinstall all my Nvidia drivers. I uninstall the Intel HD graphics driver a few days ago and has not changed anything. I would appreciate an answer to this problem because I would like to continue to use the "sleep mode" because it consumes less energy and prolongs the life of my case of LED. Thank you!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem