Audio clips in timeline are super quiet

Similar Questions

• where are the names of audio clips in the timeline (first CC)?

  How can I display the names of the audio clips in timelint inside the first CC?

  In the timeline panel, select the timeline (wrench) display settings > display the names of Audio.

• How to display the name of audio clip in the timeline?

  How to display the name of audio clip in the timeline?  I can see the label for video clips in the timeline, and when I hover over audio clip [I see the label, but otherwise, not l; abels show in audio editing.

  Hi denniscallan,

  Audio Clip names are disabled by default in first Pro CC. Turn it on go to the timeline (wrench) display settings in the timeline panel and choose Show names of Audio.

  Hope that helps,

  Kevin

  

• No audio clip names do not in the timeline

  In first CC, none of my audio tracks shows the name of the element.  The video tracks do just fine, but the audio tracks are just empty.  They play very well, but do not display the name of cip.  I tried to go through the settings but nothing seems to fix.  I tried to start a new project with different audio clips but still the same problem.
  Under first CC (with the last update) Mac Pro running Mountain Lion.

  In the timeline panel, select the timeline (wrench) display settings > display the names of Audio.

  Peter Garaway

  Adobe

  Premiere Pro

• Easy solution to give each audio clip to 0 dB in the timeline?

  Hello people, I am working on a project that was originally published by another editor, I'm fixing his mistakes and redo a few things. One of my questions are, most of the audio in the timeline panel is maxed out at 6db and cutting the rest of the audio. Is there a quick and easy solution that would allow me to eliminate having to go and drop each audio clip down to 0db manually?

  You can go in the Audio Mixer Panel and lower the volume of the entire track. If there are additional sounds on the same track you want not updated, just transfer them to a track of quantity. Which solves the problem?

  I hope this helps!

  -Barrett

• audio clip WAV plays is not in Final Cut Pro (unless in the timeline)

  I have a few audio dialog recorded externally on syncing with my videos. It is in format wav 24-bit / 48 kHz. The problem is the audio clips will not play participate in event viewer so that I can revisit. To be more precise, when I hit the space bar the cursor moves along the clip, audio level indicators move up and down as if it is being read, but I have no audio output. However, if I drop the audio clip in the timeline panel, press space - it plays perfectly!

  Clues of what happens anyone?

  Thank you.

  10.2.3 FCPX

  Try to convert the audio 16 bit @48 kHz .aiff.

  The audio as it is, very probably turned in the Timeline to conform to the parameters of the project on the fly.

  Al

• Audio clip is not dragged himself along with the images on the timeline. Adobe CC

  H,

  First CC

  Audio clip is not dragged to the timeline when I try to drag it from the source monitor Panel.
  Please help me solve this problem
  Thank you

  

• What are the formats supported by audio clip?

  What are the formats supported by audio clip? Is it the same as in media?

  It is solved in the FAQ of the JavaFX site.

• Why some of my audio clips are green?

  Why some of my audio clips are green? The rest are gray.

  

  The Green is the normal color.  I would like to ask is why are your MOV gray?

  Probably a frame, like Steven suggested in post 1.

• With the help of an audio clip to control the timeline

  I have a composition that has two pieces of VO. Each has an associated text block.

  I want to play the first VO when it is clicked on the first text. Then, when the VO ends, I want to fade the first block of text to falter, the second and play the second VO when we.

  I have the updated scenario in place with labels to play through transitions at the end of the first VO. No problem there.

  I have the audio that plays when I click on the blocks of text. Everything is good.

  However, I don't know how to make the calendar before the audio clip at the end play.

  This is the code for the first block of text:

  SYM.$("RUP01_Nar_1") [0]. Play();

  SYM. Play ('Nar2');

  It plays audio but also plays the timeline instantly (so from one to the other, the blocks of text fade as soon as starts the audio).

  I tell myself that I need some kinds of code between who said, essentially, ' wait than the audio finishes then [cheek chronology]. " But like many I tried I can't find anything to do.

  Thanks for your help...

  Thanks for that,

  I gave it a try, but unfortunately it did not work. The audio could not play altogether.

  However, I managed to solve the problem by using the setTimeout function and enter the audio duration as the time-out;

  SYM.$("RUP01_Nar_1") [0]. Play();

  {setTimeout (function ()}

  SYM. (Play ('Nar2')}, 10000);

  This does not mean having to customize the time-out for each clip, but it will serve well for the moment.

• I can't drag the audio clip in the timeline

  I can't drag the audio clip on my calendar

  Most common user error: no source patch tracks

  

• Audio clip not ringing?

  I'm working in iMovie 11 OS 10.7.5.  I'm currently reviewing a film I did last year.  I needed to replace some of the imported videos.  These are originally midi clips I created in Garage Band and then became mp3s.  I put a couple of clips in the iMovie project, and they worked very well.

  But earlier, I imported a new clip and while he sits very well in the timeline (and I got the green sign that I was drag / drop '+'), it does not play!  In other words, everything seems as it should; but no sound when playback it travels.

  The noise occurs when I play the clip in iTunes, and it also works when I click the icon on the desktop of the clamp.  All other sounds in the movie play normally.  I checked all volume levels.

  Can someone help with this strange problem?  Thank you.

  Is it just the audio clip one who is affected?  (You don't cut accidentally the audio):

  

  or reduces the volume to zero.   It shows a waveform?

  Geoff.

• Audio waveform disappears from the Source monitor after opening another audio clip

  I use Premiere Pro CC 2015 on an iMac (late 2014) of new 27-inch Retina 5 k with 8 GB of RAM.

  I've got 5 takes of the same voice that I'm editing into a simple video "How-to" recorded at the screen. I'm pass between the clamps and picking at the take, that I prefer and move it into the timeline.

  Problem is, once I open an audio file and then pass away from him to another audio file in the monitor Source Panel, the waveforms on this clip will not appear when I open it in the Source monitor. See waveforms is a unique case, unless I restart Premiere Pro. I can still hear everything and I still see the playhead moving across a green screen, but the waveforms are gone. It works fine the first time I open the clip.

  I waited about 10-15 minutes to see if it's just to take a second to reload the waveforms, but none of the clips appear in their new waveforms unless I restart the first. I tried to open a video and then come back to an audio clip. I have actually managed to do come back simply by moving the source monitor Panel in its own window separate from the table of mixing, effects, etc. but it happened again the next time I went to another audio clip and no amount of monitor source is fluttering it don't come back.

  Is there something that I am missing? I can still change course by listening to each piece of the voice-over begins, but without seeing it, it's a real pain.

  I think that this has been fixed with the latest update. No more problems!

• audio clips on slides

  I'm a Noobie, sorry.  Want just the course to automatically move to the next slide after the reading of the file audio narration on each slide.  Thought that setting the action drag on enter = continue and exit = switch to another slide to automate this process.  The audio clips are the length of the blades in the timeline panel.  It hangs just at the end of the slide.  I have buttons in nav on the model of slides that I can use to move forward, but not what I want.  This must be the easiest thing in the world.  Yeesh.

  I can run by using the action drag enter = play Audio and select the audio file, but it does not appear in the timeline panel and facilitates synchronization impossible.

  Help, please!

  Captivate 8

  Windows 7 Professional

  Hello

  Normally the slides automatically advance without a break. Chances are, the "navigation buttons" pause. Buttons usually break slides until they are clicked.

  See you soon... Rick

• Can I have several levels of volume along an audio clip? SS12

  For example, I want there to be a single note of music on the video soundtrack.  But I want the music of the film to decline in volume when important things are said in the soundtrack.  Anyway I can raise and lower the volume at different points in the music of the film?

  KeechakVarg

  Thanks for the update and the good news of progress.

  Mixing Audio is an automatic lane to place keyframes volume... essentially, as the content of the timeline plays in the monitor area Edit with the Audio Mix dialog box open, adjust you volume sliders of Audio mixing for the numbered audio track, track involved narrative or Bo.

  The intelligent mixture basically can adjust the volume in the narration or sound track against the dialog box into a numbered audio track depending on how you specify track, foreground or background.

  Volume keyframes that are defined by these means can be considered as white dots on the band stretch audio clip and can be adjusted also.

  These keyframes of the volume can also be adjusted in the box show/hide the keyframe controls in the expanded group box adjust tab/adjustments Palette/Volume.

  You can also make keyframing of volume at the level of the scenario. See the clip audio rubberband, which is the orange line running horizontally through the audio clip.

  If you do not see the keyframes of the volume "white love"...

  a. make sure that the clip is set to Volume Volume: Clip and then click with the right button on the audio clip, select 'Show the Clip Keyfrasmes' and follow the path to the Volume Volume: Clip.

  We will follow to your results.

  Thank you.

  RTA

  Add on... Audio clip Rubberband

  http://www.atr935.blogspot.com/2014/05/pe12-audio-features.html