audio device not found
The message in the taskbar indicates that there is no audio device installed, but I can find intthe Device Manager, who says that the device is working properly and that the driver is good. Any suggestions?
Hello
(1) have you made changes before the start of this issue?
(2) can you hear the sound of the computer?
(3) what is the brand and model of the computer?
(4) you receive an error message?
See the links below:
Open the troubleshooting of Audio playback
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Try to update the audio drivers:
I recommend you to download and install the Audio in Windows 7 drivers from the manufacturer's website.
For more information see the articles below:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Tags: Windows
Similar Questions
-
Error "no audio device not found" after installing Windows 7
Original title: no sound
After you have installed windows 7 ultimate in my dell latitude d610, I have no sound. What should I do? He always tells me no audio device foundNo sound
(1) have you installed the latest audio drivers? If not download them from the manufacturers website or try to run Windows Update - which could include the generic drivers for your audio device.
(2) you have the right sound device? Click Start, type: sound. Under control panel, and then click sound. Then set the audio device by default.
More options:
(3) is the disabled audio device?
A. right click on the speaker on your taskbar icon
B. Select "playback devices".
C. in the white space and blank, right click and select both show disconnected devices / people with disabilities
D. do you see icons for your speakers and headphones now?
E. Si you see now you may need to right-click on the correct audio device, and then select "set as default device".(4) you can also try the troubleshooter below to discover the connection issues that may exist, the instructions are below:
A. click on 'Start' > select 'control panel '.
B. Type of troubleshooting in the top-right search field > select "troubleshooting."
C. click "Hardware and sound" > select "play Audio".(5) also pass through the steps mentioned in the article below - tips to fix common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsThis message may also help:
http://social.answers.Microsoft.com/forums/en-us/w7music/thread/c0f92662-f792-4e4e-B24B-2fae1e52eb7c
Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
Audio device not found - which driver?
Hello
I have an Inspiron 6400 and in My Documents, it says that I have
Integrated Sound Blaster Audigy ADVANCED HD Audio-trial
VersionI just reinstalled Windows XP Pro and can not get any Audio driver installed.
3 audio drivers are available in Download Center-
I first tried the Creative drivers can
Creative Labs Audigy integrated invitation, v.RC5, A02
and
Creative Labs integrated Sound Blaster Audigy ADVANCED HD Audio, v.RC6, 44.1 K A02
He always says something like: no supported device found. If the driver seems not to adapt to my device.
I also tried the driver Sigmatel - same result.
What I have just after reinstalling XP is the installation of the software system for laptop - after I read about the right order, I installed them afterwards - so maybe that's a problem?
I also installed the driver chipset as one of the first, then, before the system software.
Is it possible to uninstall the drivers?
I hope I did not reinstall new XP simply because the audio device...
Thank you very much in advance for each indicator
Concerning
-
Audio no longer working showing Audio device not found on new HP ENVY 15 Notebook PC TS
HP Audio CODEC high definition
Windows 8 bit of b64
Any audio just stopped working watch on mute, as most any audio device.
Any chance to try before returning
Problem has been resolved. By installing Windows 8.1 who come back a little and then installation of beats audio for Windows 8.1 solved the problem.
-
No sound. Audio device not found in Device Manager.
Original title: where no sound is
I can't install audiodrivers for msi ms-7267 VER: 5.0 mainboar. I had tried to unistal and install again, but he can not yet found on legacy manages the window.
What should do? I have no sound?Best regards, Modestas
Hello
Step 1: Run Microsoft fix it. This automatically the diagnosis and repair of problems with devices when Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.
Click on this link to run the fix it: http://support.microsoft.com/mats/hardware_device_problems/en-us
See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questions
-
3480CT, device not found driver Portege
I have a problem,
I have a laptop toshiba portege 3480CT and is not an operating system. I am trying to install win98 SE, but when it starts to install this message appears:
device not found driver: "OEMCD001."
Invalid device CDROM drivers selected: so, how can I get these drivers, the computer has only CD-ROM drive, FLOPPY No.. CDrom drive is a pcmcia drive.
Please help me!
:)
I also tried to install XP pro but with bad results, it gives errors when it tries to start the windows installation...WHAT to do, any help much appreciated!
Thank youHello
If you have installed WIN 98SE on the device you need Toshiba drivers and utilities.
Win 98SE OS you install all the applications in the following order:Display drivers for Windows 95 (for S3M7 Savage MX/IX) V4.11.01.7006 - 7.02.88 - 01
YAMAHA AC - XG Audio Driver for Windows 95/98SE V.4.07.1011
Floppy disk Win98 companion W98C09
Logitech MouseWare for Windows 95/98 V8.37 BLD246
V5.77 - MR577ALL004 modem driver
Driver for TEAC V.1.06t (FDD Version 1.08 t) USB floppy drive
Driver drive disk USB for YE - DATA V.4.30 Beta
Panning of Driver Support (panning.sys) V3.0 (included in the display driver)
Multi Media Port Replicator IDE Driver V.1.1.2.0315 with the file catalog
Driver NDIS for V.2.21 de MSIR3.0 (driver Win98 OBOE)
Toshiba Fast Ether LAN adapter (Intel 82559) V.2.01
HALLOC. EXE (included in the Toshiba utility) V2.0
Toshiba W983480US utility
PCMCIA. INF for Windows98SE (support ToPIC100) V1.0
QFE Win98Gold/Win98SE QFE KB:Q239697
QFE Shutdown QFE Q242934
QFE DiskTsd.VXD V.4.10.2223 Q246387xx8
NDIS QFE Q243199 QFE
QFE Win98SE USB QFE Q241084
Direct X 7.0
Acrobat Reader
The users manual PDF file
File PDF Manuel Modem internal
Multi Media Port Replicator manual PDF file
Toshiba wallpaper
MS URL security updateFor Windows 2000 / XP in this order:
Display driver
TVALD
TOSHIBA Power 2 extensions
Toshiba Utilities
Toshiba Mobile Extensions
Energy saving of Toshiba Display Driver
Toshiba infrared driver
Toshiba IDE driver
Acrobat Reader 4.05
Operating instructions online
Online modem manual
Online manual users to multimedia Port Replicator
Audio driver
Driver Modem
Country select utility (included with driver modem)
Copy Toshiba wallpaper in c:\winnt
Apply Service Pack 1 for the system
Activate "Show the components of the" unplug or eject hardware trayicon
Reinstall the display driver to support the new graphik S3 chipAll the drivers you can find on the Toshiba site:
http://EU.computers.Toshiba-Europe.com/
Please let me know if it has been successfullyBest regards
-
Device not found Airport Extreme
We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.
The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.
I have reset the AirPort Extreme to the default settings, but the problem continued...
I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...
no idea how I can fix this problem?
You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.
If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.
Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.
There is a solution: on a Mac, open AirPort Utility and select file > configure other...
For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.
Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.
If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.
Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.
-
Hello! I have two devices from the airport: on the one hand at home and a time in my lab Capsule. I was away for 20 days and yesterday, when I came back, there was a problem with the two: my Mac cannot access these devices, they can connect to wifi networks hosted by them. When I try to access these devices via Airport utility, I get the error message "device not found". This message, both at home and in the laboratory, tells me that the device was part of my network before, and that I should check if it is within its range. There is an option to 'forget the device' in the end. It is quite strange, as other Mac networking for my laboratory do their backups normally during my absence. Could you please help me? Thank you.
This was reported once many here recently.
A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:
- Run the AirPort Utility.
- Select the base and then station, select change.
- Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
- On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
- If you have entries here, select it and click then the minus sign "-" button to remove it.
- Click on update and allow the base station restart.
-
Why do I see "device not found" airport Admin?
I have an AirPort extreme and my parents have a TimeCapsule. They are both showing the message "device not found" in the administration of the airport. We tried cycling power etc. Our networks still work, however we can not connect to manage and backups of my parents stopped. Is anyone else seeing this?
You have Back to My Mac configured on your AirPort Extreme? If so, disable it.
This issue was widespread in the last days. We are all waiting for an answer / difficulty of Apple.
-
Device not found, but internet work
I have an Airport extreme with a capsule 2 TB that I use as a backup file.
All of a sudden I can't connect to the airport time capsule. When I launch the airport utility, there is an orange triangle/exclamation point that fits the description "device not found". The router works well, since I am connected to internet (at this time).
I tried to unplug the unit and time capsule comes back for about 2-3 minutes until the same problem occurs again. Factory of Soft and hard resets produce the same results. I know this isn't my macbook pro because it does the same thing on my phone as well.
You have Back to My Mac configured on the TC with your AppleID?
This has happened to me and when I removed my AppleID and disabled Back to My Mac it ceased to occur and the TC became visible again.
I hope that Apple will fix this soon but it would pay record a call of support with Apple on this topic as well.
-
Airport Time Capsule device not found
I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014). It integrates the latest version of the 7.7.7. Just last week, I received the error device not found (.. .has been previously a part of your network... etc.). The internet connection is always good and the component of the time capsule router still works. When I unplug the device, it can find him but eventually will go down in a few minutes. I also did a warm reboot, but some results. Printer connected to the time capsule does not, nor does Time Machine back ups.
Would be grateful of any advice on why the drive not found error continues to occur. Thank you!
You have Back to My Mac enabled on the Time Capsule?
If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.
-
Device not found in airport 6.3.6 utility
Running a 5th generation I'm stuck. I checked a bunch of other posts and restarted all devices, as well as reset the base station. I also adjusted IPv6 at the local level.
When I pull up the Airport utility, I get "device not found" and cannot connect to the base station to adjust settings. What is weird is I can get temporarily in Airport utility if restart my MacBook and the base station at the same time. However, it does not last long. I also see the drive mounted in the Finder all the time. A Wi - fi connection works without interruption.
I tried this on 2 Macbooks, an ipad and an iphone. El Capitan running. I am at a loss.
Someone at - he was able to solve this problem.
You are one of the many ad today with this problem.
for example. There is only one thread.
Time capsule not recognized in the utility of the AP
I suggest that you can still access the AE or TC using configure others and type the IP address.
A 5th generation is the flat and quite old but more reliable than Gen6. But beyond 5 years they get flakey.
If you mean a 5th Gen TC then this is the newest one.
I am surprised, he's also missing on the iOS but who was more reliable version of airport utility.
-
Performance of Time Capsule and "device not found".
I am now on my 2nd TC average weeks because I thought the first was broken-, but I get the same questions on the second >
- A Wi - fi connection is very intermittent. Seat 3 feet of the TC, I can get 450Mbps on my iPhone 6 and 5 minutes later her stockings to 2Mbps or less (measured on the Wi - Fi Sweetspot app). Similarly, the speed of connection internet test ranging from 20-30Mbps until 0.3Mbps not it depending on the strength of the wifi.
- Air utility sometimes connection works and see the TC. But often it is not. First he asks the password, maybe 2 or 3 times. Can I get a yellow triangle showing on utility AP with "Device not found" and the only option is to Forget. The TC IS still there, but since I use it for ethernet and wifi internet access still works because I am always online.
So, what speeds SHOULD I get the Wi - Fi, 3 feet of the TC - I would have thought higher?
Why WiFi speed decreases considerably, sometimes in the same place?
Why the Airport utility is not the device, when it is still there?
Is this a general problem with TCs? Is this another duff, one back?
Thank you
Update you the firmware to 7.7.7 in the TC?
If all tests performed 7.7.7 then downgrade the firmware to 7.7.3 as he could work much better.
If it still fails I just return it.
They seem to vary a lot in quality of construction. Some work OK but many have problems... and when you Exchange to the same store you get another from the same lot.
There are a lot of articles on wireless diagnosis.
for example, from your Mac.
Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support
Follow the wireless in a few days... and use ethernet if possible... Wireless is never a reliable substitute for ethernet.
iOS
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
A lot of wireless issues with each new version of iOS... he could so your phone that is the problem, not only the TC.
https://www.YouTube.com/watch?v=j4qgH8uyOk0
You should check how wireless is around you and the intensity of the signal of all devices.
I also need to know the exact of the TC configuration and your network if you want to find the problem. Although problems with the Wi - Fi in the TC would be not at all unusual.
-
Portege R600: SIM inserted but error: "device not found".
Hello
Portege R600 under XP.
Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".Cannot find the configuration options or anything like that in the manual.
Can someone point me in the direction of literature?Thank you very much!
Evan
Hello
Here you can download the latest version of 3G driver and tool:
http://APS2.toshiba-tro.de/WLAN/?page=3gdownloadsHere you will find a knowledge base on the topic of G 3:
http://APS2.toshiba-tro.de/WLAN/?page=3ghowtoand here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htmHope this helps
-
Device not found Boot Install an operating system press F10 to reset factory and she request password have my pw does not give me the code 69599233
Hello
Thanks for posting in the HP Support forum. Welcome Onbord!
Regarding the admin code you have give, please keep the power button hold for a while until that the PC stops. Repeat using the power button and
as soon as you do, keep hitting the key Esc (as tap-tap-tap) - you will enter boot HP like this menu:
Press F10 to enter the BIOS and when it asks for password, please enter this code 76491815 to ENTER.
Follow the on-screen instructions to change the password or delete.
Maybe you are looking for
-
no details
-
Jerking on Satellite M30X 3D graphics
I used the M30X for about a month now. With most 3D games that I run, the graphics become jerky after less than a minute of play, i.e. one or two times per second, the picture stops for about 1/5th of a second. My video card drivers are up to date.
-
Blu - ray plugin for toast... How to buy? do not appear in the store
I bought an external drive this morning. Then I went to the App Store and got the Toast. Since there were two available toast, I got both. And then I started looking for the plug-in (under the Green toaster) available for $15.99... I opened the softw
-
Satellite P300D-130 - activate the AHCI on Windows XP mode
Hello I recently bought this laptop and replace Vista by XP to get performance for games.I've been reading about SATA (AHCI mode) and WinXP and for the installation, I put the Bios on the compatibility.But now I want to install the AHCI drivers but i
-
Hello Does anyone know why a keyword would show up in white? See below. Keyword list shows as empty