Satellite P300D-130 - activate the AHCI on Windows XP mode

Similar Questions

• Activate the AHCI in Windows 8 / BIOS - HP Envy Sleekbook 6 - 1153eo

  Greetings,

  My computer:

  HP Envy Sleekbook 6 - 1153eo

  Windows 8 Pro

  AHCI is currently disabled on my computer and I want to get the best performance out of it. It can be enabled easily through the windows registry, but to get this to work I need to be sure that the AHCI is currently enabled in the BIOS as well. When I enter the BIOS it's not just all advanced options available, only the time and date and other bases. How can I know weather or not that AHCI is enabled in the BIOS? How can I access the advanced options in the BIOS to turn on the AHCI (if it is not already turned on, that is)?

  Thank you.

  Kind regards

  th0d

  Hello:

  The BIOS of HP notebooks of consumption made in recent years is already set to AHCI, and it cannot be changed to any other setting.

  In some models that offer two hard drives, the default value of the BIOS can be on the RAID.

  Computers to only HP business notebooks have a BIOS setting to change the controller in AHCI or IDE mode.

  Go to Device Manager and expand the IDE ATA/ATAPI controllers section and you should see a speed control that is listed as a SATA AHCI controller.

  In the case of AMD laptops, it can just be tagged as a SATA controller.

• Satellite U500 - 11G - cannot activate the upgrade to Windows 7

  Really sorry to this topic, but with the new Satellite U500 - 11G can not activate the upgrade to Windows 7. Keep told by entering the serial number that it was origonally installed with Vista, but no info on how to activate it.

  Any help here please?

  Hi mate

  The Toshiba pre-installed Vista OS has already been activated.

  AFAIK if you upgraded the operating system Vista to Win 7 using the Toshiba Windows 7 upgrade kit then a Win 7 must be already activated and does not need to be enabled separately

  See you soon

• Satellite P100: How to activate the AHCI mode?

  As all you know, some laptops P100 series are equipped with a controller Intel 82801GBM SATA natively supports the AHCI and with a Fujitsu HDD which takes in charge the NCQ.

  However, the disc is forced in compatibility mode, and therefore the NCQ is disabled, resulting in a loss of performance (which is certainly necessary that laptop hard drives are generally slower than those of office).

  Unfortunately, there is no option in the BIOS which activates the AHCI mode and no tool like HWUtility that can twist that (although it wouldn't work). As far as I know, newer laptops support AHCI mode and there is also an option in the BIOS to enable it.

  Is it possible to activate the AHCI mode in our laptops beloved and make the most of our hard drives?

  Hello

  Do you think that the AHCI is disabled?
  You can run the Intel Chipset ID utility to determine if the ICH7DH SATA controller is already running in AHCI or not.

  However, I studied a little more on other forums that are a little more specific and find this:
  Activate the AHCI on Intel chipsets, without having to reinstall Windows 2000/XP
  http://www.Neowin.NET/forum/index.php?showtopic=457699
  and
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62909

  But you know, everything you make are at your own risk!

• Satellite P300D-130 - some drivers are missing on Vista 64-bit

  Hello, I own a Toshiba Satellite P300D-130, model serial PSPDCE-000009FR, 78055027.

  I installed Windows Vista Edition (letters) Home premium 64-bit.

  Since this installation, no network adapter is detected, nothing appears in the administrator of ring road (ring road) of the NIC (map).

  In addition, there is a category in the ring road (peripheral) administrator the other roads (peripherals) of the ring "with ring 4 roads (peripherals) pilots (drivers) who are not installed (code 28):"
  -Mass storage controller, identification of hardware (equipment) N: PCI\VEN_1217 * DEV_7130 * SUBSYS_F F501179 * REV_01
  -Ethernet controller, N to identify material: PCI\VEN_11AB * DEV_4355 * SUBSYS_FF501179 * R EV_12
  -ring unknown road (peripheral), N to identify material: HDAUDIO\FUNC_02 * VEN_14F1 * DEV_5051 * SUBSY S_1179FF50 * REV_1000
  -ring unknown road (peripheral), N to identify material: USB\VID_0BDA * PID_8197 * REV_0200
  Finally, the graphics card is reported:
  -Standard VGA graphics card, identification of material PCI\VEN_1002 aboard N * DEV_9591 * SUBSYS_FF501179 * R EV_00 with a code 10 indicating that it cannot start.

  I downloaded the update to the BIOS for Vista 64 on the Toshiba site, but nothing has changed.

  Thanks for votrre help.

  Hello

  It seems that some drivers are missing on your laptop. ;)

  To solve the problems, you must download and install the drivers on the Toshiba site. You will find all the drivers for your Satellite P300D:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have any other questions, please let us know!

  Welcome them

• Can I activate the AHCI on my CQ50-215nr mode?

  I want to improve my Compaq CQ50-215NR with an ssd when I install windows 7, bios is not all options for the sata settings and I would like to know if there is another way to activate the AHCI before I have buy an ssd.

  Hello

  Even if the option is not available in the Bios menu, AHCI is already enabled in Bios of HP.

  Kind regards

  DP - K

• HP Envy 1540T H8: How can I activate the AHCI?

  I installed a new Pro 850 Samsung 1 TB SSD drive which replaced a Samsung 256 GB SSD.  However, I am unable to get the computer to start with I select AHCI mode in the BIOS of the reader.   I can only boot into RAID mode and magician then tells me to activate the AHCI for optimal performance.

  The following system information is provided:

  OS: Windows 8.1 64bits

  Chipset: Intel (R) C600/X 79 series chipset controller LPC - 1 41

  Storage controllers: Intel (r) Desktop/Workstation/Server Express Chipset SATA RAID Controller 12.8.2.1000

  RAM: 32 GB

  Does anyone have any suggestions on how to proceed?  Thanks in advance for your help.

  Mr President.

  Thank you very much!.  I tried to solve this problem for days.  I had already installed a new copy of Windows 8.1, so I've been worreid I need to start over, but I do not have.  All I had to do was follow you to start in safe mode.   I then rebooted in UEFI, changed the RAID on AHCI and disabled Secure Boot.  The system then finished the re-boot and is in AHCI mode.  I have not lost all data on my three internal drives (1 SSD and 2 hard drives).  For some reason, he did reformat a NAS attached, but I don't have something out there that was not saved.

  I really apprecitae your help!

  All the best,

  John

• G62 b31ee I need to activate the ahci on my laptop please help

  Essentially I would like someone to change (or teach me how to change) my BIOS so that I can activate the hidden options and so tell - activate the AHCI.

  Hello:

  There is no way to do what you want.

  AHCI is enabled by default, and there is absolutely no way to change this.

  If you want to install Windows XP, then you should read the guide at the link below, read the Intel section and then read the downloadable document to integrate all drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• How can I activate the AHCI on a Studio 540?

  Hello I recently upgraded my pc to an OCZ Vertex 3 240 GB ssd hard drive and moved my old HDD as a secondary for the storage of music, pictures and video files. I read that using the SSD in AHCI mode will further improve the performance of the disk. My question is how can I activate the AHCI in bios dell. the only im options given are SATA and RAID. Is it possible to run AHCI? Any help is appreciated. I have better than average knowledge with pc, s but far from an expert. Thank you

  Care Syatem

  Core 2 quad 8200 processor 2.3 ghz

  8 GB DDR2

  PNY geforce 560ti

  Agility 3 OCZ 240 GB primary

  WD caviar black 640 GB secondary

  Corsair 600w ch

  Windows 7 64 bit

  If your bios allows, you can find passage to the raid (even if you have only a single boot drive) can put you in ahci mode. Before making the change in the bios, you will have to do some registry tweaks like just change the bios setting you will get a bsod when you start.

  To enable switching between RAID/AHCI/IDE mode, you will need to change the values 'Start' in these key 0

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide\Start

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV\Start

  Once you make these changes, restart and set AHCI/raid in BIOS, save the changes and then restart.

• How to activate the pop-up windows?

  I can't fill a demand for services with ASCAP because I've not enabled popups. So, how to activate the pop-up windows?

  You can uncheck the block pop-up windows under the Orange Firefox button > Options > Options > content tab.

  See more details here

• Tengo problemas con mi equipo no me already access mi red inalámbrica me pide activate the firewall of windows comohago by activarla

  Tengo problemas con mi equipo no me already access mi red inalámbrica me pide activate the firewall of windows comohago by activarla

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• G9 - 791 tried to activate the AHCI in the BIOS, killed for laptop

  Since I've upgraded to a SSD, I tried to activate the AHCI in the BIOS mode, just like I did with my Alienware laptop.  After changing the setting and restart, I was unable to boot the system (it's ok), but also unable to get into the BIOS to change it back to the RAID.

  Which led me to return the laptop to the place where I bought it and get a new, still under warranty.  Is there a reason any BIOS gets damaged when you change this setting?  I'd like to use the AHCI mode instead, but I can't afford another laptop brick.

  I got it! I actually downloaded and installed the most recent Intel (14.8.XXX), and then changed RST 4 setting in my registry to reflect the changes of the AHCI. Restarted without enabling AHCI in the BIOS, to make the site everything was still good. Perfect. Return restarted to the BIOS and activated ONLY AHCI. Does not all other parameters. Rebooted (twice), and everything works!

• Satellite P300D-13 has (PSPDCE) - downgrade to Windows XP SP2 from Prof. - pilot

  Hello, first of all, I come from Germany and I hope you understand my problem...

  I bought last week it really useful for computer laptop Satellite P300D-13 (PSPDCE) and have now a few huge problems...

  I have download all the drivers of P300D Series for Windows XP and also installed the display driver.
  My problem is that the sound is not as good as on Vista. He did not get the right sound for me... Is this a driver problem? But I can listen to the sound...

  Another problem is that Windows XP found SM Bus controller, but cannot find a driver for it.

  I know it was a big mistake not to burn a DVD of VISTA recovery but I have all the files for recovery on a separate disk DVD. If I have the Toshiba recovery software can I make a DVD of recovery with the old files of Vista on Windows XP? If all goes well, there is a solution...

  I don't like Vista, it's like a very expansive toy for me. So I decided to install Windows XP Prof. SP2...

  I hope someone can help me...

  Regarding the noise I suggest you to check the website of conexant for some newer drivers, maybe they could improve the 'sound quality' of your audio output.

  The SM-Bus is part of the ATI chipset and install it that you only have to google for "ATI SMBus" that returns thousands of links to driver ATI SM - Bus.
  With the recovery it s not so easy because the file structure on the recovery partition is not similar to the image of final recovery on the recovery CD.

  I suggest to make a picture of your XP, recover your machine with the recovery of HARD drive, burning media, and then copy the picture from your previous installation of XP on the C: drive. I know it sounds a bit like much work but it s worth. :)

  Welcome them

• Satellite L500 - cannot activate the WLAN on FN + F8

  Hello to all users of Toshiba, Ii'm new to computers laptop Toshiba, this one beeing my 1st and iIhave a well-known problem, I read on the internet.

  I recently bought a Satellite L500-13W. It has Realtek Wifi and comes with Vista OS. I deleted Vista OS since I have the license to the retail of Windows 7 Professional and Windows 7 top intalled. All work well, Audio, video, everything outside the wireless card. I enabled from the BIOS and everything and yet when I press FN + F8 it does not activate. The drivers are properly installed, as Windows 7 brings the upgrade of drivers. He said that the card works fine, but it does not turn on and search for Wifi signals. The Orange of the WIFI led does illuminate not.

  If anyone has a solution for this problem, I would be very grateful. I don't know what can be the problem, the software or the hardware.

  Advice me please. Thank you.

  Hi Darius1990,

  > Drivers are properly installed, as Windows 7 brings upgrade drivers
  This means that you have installed the Windows update WIFI driver and no official site of Toshiba, right?
  Well, in this case, I would try the prétestées WLAN driver from Toshiba. So you can make sure that it s not a WLAN driver related problem. Just check the WLAN from Toshiba Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Have you tested other FN keys combination?
  If they don t work too you must install the package of added value and utility to Support Flash Cards because these two tools to control the function FN key and are important to use them correctly.
  ?

• Satellite A200-130: Upgrade the RAM to 4 GB but Vista 32bits see only 3.1 GB

  I just bought my laptop Satellite A200-130 memory 2 * 2 GB and trendy bars, but if I see the size of the total as memory is 4096 MB, on Windows Vista Home Edition (32 bit), in the BIOS, I can see only 3.1 GB.

  I checked on the Toshiba site and it states that the laptop can take up to 4096 MB, so can any please tell me how to fix this problem?

  Why 3. 1 GB shows, instead of 4 GB?

  Have you read or heard something about 32-bit limitation of Windows?

  Isn't it?
  Well, I advise to use google and search for it.
  It turns out that all 32-bit Windows operating systems can see only 3 GB of RAM

  In addition, you can find some details in the Microsoft Knowledge base.

  Welcome them