audio device (pcm_in) error «some audio devices (PCM_in) could not be exploited...» Make sure your device host audio working properly... »

Similar Questions

• Locking XP! error "the system could not log. Make sure your username and domain are correct, then type your password again.

  Original title: Locking XP!

  I tried to read all the relevant messages and walked the Earth for this solution, if someone could help me I would be grateful.

  A dear friend died and I got his PC - a fast XP with SP3 which (elderly) she only used for web & email. His account has been "Judi".

  I noticed a while back that, on the logon screen, that there is another user called 'Fiona' (she told me an old co-worker who probably stayed with her).

  Now a friend in need of a very old HP PC Lions not having completely fortunately I managed to copy his files before he was insane - I offered this newer PC it after that I have "set up" for him.

  I put a new account in place on this new PC "Ken" has been added. Then, after the deletion of accounts Judi & Fiona, I cleaned the machine with MalwareBytes, CCleaner & defrag.  All is well now with only Ken appearing on the screen logon (with an image of the appropriate icon), that I used several times in the implementation of his e-mail account and move its acrossetc files. His password is empty.

  Being the only user now Ken, I thought that it strange would its user (only) one click each time to the 'Log in', so I searched and found a box that said something to the effect «... do not show a picture of connection...» » .  That started my problem!  Removing his login "icon" brings ONLY the following - FIONA!

  When connecting a Logon Message now says "the system could not log. Make sure your username and domain are correct, then type your password again.  Letters in passwords must be typed using the proper case" the choice for this error message is 'OK', which takes you to a login screen 'Type Win98' older Classic looking (no icon user) who was behind this logon Message, with (name) Fiona appears on the login screen (former) (full name and empty below the password) , with the choice to enter the password or a stop!

  Of course the password cannot be guessed (Yes - tried blank, admin, etc.) so the only choice is to stop.

  VA F8 at startup for 'Safe mode' goes to screen black WITH Fiona login screen as usual safe mode above and booting with the CD using NTPASSWD shows the usual 1) Administrator 2) 3) invited Ken and 4) Support Microsoft - NO FIONA is shown - and I put all these passwords to 'empty '. Of course repair and recovery repair 'R' does nothing on the removal of Fiona

  This translates the original message & Fiona connection again.  How can I return to screen "image icon" connection without losing files and mail Ken Ken. Where Fiona could hide when it is not a USER of the NET?

  Yet once again, I'd appreciate any help. Brian.

  You should be able to just select (click on) "Fiona", press the delete key, and then type any desired account name.  It doesn't work?

  If you cannot type on "Fiona" in the logon window, you can use the following procedure to modify the Windows registry... or you can take the computer to an independent repairer and ask them to fix it for you.  Don't go to a chain of stores, as a "geek squad" or BigBoxStoreUSA type of place.

  Go here--> https://www.raymond.cc/blog/how-to-edit-windows-registry-key-values-without-booting-in-windows/

  Choose method 1 or method 2.  I'm familiar with Hiren (method 2), but not with the program described in method 1 (even though it seems simple).  Any ISO file you choose, I suggest to download and use ImgBurn (free) to create your CD bootable from the downloaded ISO file.

  The registry key to change is in the same place as "userinit" (which is the example used in the article), so to follow 1-5 step method or method 2 for step 7.

  You will be at HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the right pane of the registry editor, you will see a large list of items.  Scroll down the page until you see LogonType and double-click it.

  In the "Value data" box, type 1, and click OK (1 is the same either hexadecimal or decimal).

  Close the registry editor, take the CD from the drive and reboot.  You should see the Welcome screen when Windows restarts.

• Cannot read Psychonauts off Steam error - the game could not create the Direct3d device. Please make sure your video drivers are installed properly

  Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:

  The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?

  Thanks again for the help.

  I'm not familiar with Apple but I found this:

  http://support.Apple.com/downloads/#NVIDIA

  Except that it is what I have from NVIDIA:

  http://www.nvidia.com/object/notebook_drivers.html

  Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.

• rise of Nations pc game United gives an error: "could not initialize services make sure that your video card and drivers are compatible with the game.

  Hi, I recently installed rise of nations pc game but does not work because it says "could not initialize services make sure that your video card and drivers are compatible with the game. What should I do, how can I fix this to get the game to work.

  Hello

   
  1. What is the operating system installed on your computer?
  2. What is the brand and model of your computer?
   
  I suggest you to follow the links and check if it helps.
   
  Known graphics issues in Rise of Nations
   
  Card video known issues
  Known graphics issues in Rise of Nations: Rise of Legends

   

• Windows Virtual PC integrated with components lock me out of my WinXP - error of OEM comments - "the system could not log. Make sure that your user name and domain are correct... »

  With my new desktop Windows 7 hardware configuration, I decided (before you consider VMware Player) to retry Windows Virtual PC; but instead of using Windows XP Mode (which is useless because the disk is inaccessible), I decided to use my own Windows XP Pro OEM. [I use it for games that won't play on Win7.  Security issues are also irrelevant, because for these games, I'm not likely to use the Web.  Of course, I always Windows Security Essentials in my OEM customers.]

  The problem here is, whenever I have to Activate my integration, features VPC opens as if the Windows XP Mode have been installed (it is not); and when the screen is turned on, it asks my user name and password.  I tried to use the name and the password that I entered when installing my XP OEM; but I get this message:

  "The system could not log.  Make sure that your user name and domain are correct.  Type your password again.  Letters in passwords must be entered using the proper case. »

  How is it that I can't access my Windows XP OEM guest when the integration features are enabled?  Only when they are disabled can I activate my OS; invited but it's counterproductive, because I won't be able to move items from my host in my comments.  Once more, if I should decide to use VPC as my host VM for Linux Ubuntu/Kubuntu, what chance is there that the activation of the integration features will lock out me my Linux guest?

  Another thing: in the Start Menu under Windows Virtual PC folder I have shortcuts for ' Windows Virtual PC ' or 'Virtual Machines' (according to the Win7 version I use, 32-bit or 64-bit); but I also have "Windows XP Mode", I have not installed.  How is that possible?  I checked the shortcut, and point it to rundll32.exe.  Should I just get rid of the shortcut, or I will incur damage to my VPC if I do?

  Hello Cooky,

  Please provide a detailed description of the issue.

  I understand the inconvenience you encountered. However, I appreciate your efforts.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• copy error: error 0 * 8007045D: the request could not be performed because of an i/o device error

  When copying the files, I get this error which is lower than
  an unexpected error prevents the operation.make a note of this error code, which might be useful if you get additional help to resolve this problem:
  error 0 * 8007045D: the request could not be performed because of an i/o device error
  filename DSc02828
  file type jpg
  size 3.27 mb
  updated the 09.11.2012
  try to jump again cancel
  Whats wrong here

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. where exactly you are trying to copy the file?

  Run check disk on the computer.
  a. click Start , and then typecmd.exe in the start search and then press ENTER.
  b. right-click on cmd.exe and clickrun as administrator.
  (c) in the command prompt, type the following command and press ENTER.
  Chkdsk /f
  Note: You may be prompted by a yes / no question. TypeYes and press ENTER.
  d. restart the computer so that the disk check starts. It will take about half an hour to complete the process of error checking. Do not restart the computer when the current disk check.
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  
  Summary the link:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272

  Just reply with the results. I'd be happy to help you further.

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.

   

• Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  Dear Forums

  Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  * Also, I sent my first question 20 minutes ago, not yet approved? Your return indicated "approved" e-mail, * why do I not see my question below still displayed? >

  The members of the Forum Pro first - Hello
  

  
  

  Can someone out there describe in simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a friend aerial artist model with white moving belt in silk on a rest mainly black background layer and a change to a night sky stars panorama I photographed previously?)

  I know that this can easily be done, I have worked in thousands of still images with creative cloud for previous years, but not yet in video in Premiere Pro, so thanks for any advice.

  I enclose the actual video that I use and some samples of the fields of the night sky that I photographed recently for ideas

  I intend to make possibly more elaborate, but for now if anyone of you could just show the basic commands and menus/menus to start to do it simply and quickly. Maybe how to most later convert it tone black & white or sepia. The ideas here is to recreate a sequence modern suite of familiar German Film, wings of desire. Perhaps also a progression in the future to create an effect of the night sky very slowly turning into one layer background behind the main façade first video layer in normal movement. Then maybe a little further - how to adjust the speed of the front to a path layer more slow half price while keeping the substantive motion, the original speed. (* although I realize that I didn't do in 64 fps for the slow movement, I am not concerned about that and would actually welcome a light old world "flip effect framework" as if, in appearance of the films more former silent motion.) * In addition, possibly cutting on 'dead time' a few seconds at the beginning of the video and the 2nd or 3rd time for a few seconds of this unexpected error, when the silk scarf fell on the camera lens (without changing the audio timeline?)

  * (I use Windows 7 on a Toshiba Satellite L555 - [only RAM 4 MB. rates], 2009)

  * Video sample >

  Sarah Seiler Aerial - camera Check-An Unedited manifesto-Dec 16 2015 - YouTube

  * Background samples >

  w-left-west-frames-with-earlier_sept-8_9-2015_1_stitch-mercator-projection-2a-titles-5000-pxl-b_galaxies-at-right-enlarged-5500-pxl http://www.dpreview.com/galleries/1579463287/photos/3374478/Trillium-Lake-Aurora-add-26-ne

  Comet Lovejoy Andromeda brand camera telescope DSC3857-1a-blue-light-increase-layer-Nov 20 2015: Mark Seibold: Galler...

  Larch Mtn Night Sky Sony NEX5R 5 Oct 2015_panorama point 2 b side of cropped rt 3000 pxl: Mark Seibold: galleries: digital...

  Cannon Beach Haystack Rock mamiya 55mm 25 2015_10_stitch_102 26 Aug frames Projection of Mercator Crop dark as he nu Fi...

  Trillium Lake Mount Hood Dark Night Sky Nov 10 2014_stitch a 5000 pxl f to fill 2: Mark Seibold: galleries: Digital P....

  Thanks so much for all the advice of one of you in the Adobe Premiere Pro forums,

  Mark E. Seibold, artist-astronomer, Portland Oregon

  Duplicate thread here: may describe in the simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a model friend artist air with white passage belt mainly black silk )

  Thank you

  Regalo

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  I run the lesson 2 TemperatureSensor project

  I can detect the BMP180

  PI@raspberrypi ~/javame81ea/bin $ sudo i2cdetect y 1

  0 1 2 3 4 5 6 7 8 9 a b c d e f

  00:          -- -- -- -- -- -- -- -- -- -- -- -- --

  10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --

  40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

  70: -- -- -- -- -- -- -- 77

  I can retrieve the info from I2CDeviceConfig

  
  

  Name of the controller: null

  Controller number: 1

  Address: 0 x 77

  Size: 7

  Clock frequency: 3400000

  My API permissions are

  jdk.dio.DeviceMgmtPermission "*: *" 'open '.

  JDK. DIO.i2cbus.I2CPermission "*: *".

  But when I try

  myDevice = DeviceManager.open (config);

  I get

  [ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1

  Any suggestions?

  Ah.

  You run usertest.sh as root?

  sudo./usertest.sh

  Needs me root access to the devices.

  Tom

• Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

  Original title: installing the aol software

  I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

  Hi Bruce,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

  This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

  You can see the AOL support article to install the AOL desktop software.

  Install AOL Desktop software

  You can also consult the support AOL article and check if it helps.

  Message: SNMaster.idx is missing

  If the problem persists, you can get in touch with the support of AOL for further assistance.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows Defender error 126: the specified module could not be found

  How to fix Windows Defender on Windows 7?

  For some time now, Windows Defender no longer works. I can't install new updates of definition and the service cannot be started. If I try to manually start the Windows Defender service, there is an error message:

  "Error 126: the specified module could not be found.

  However, I can launch the GUI of C:\Program Files\Windows Defender Defender. However, I tried to download the Windows Defender from Microsoft, but the installer launches because it is said that Defender is already part of Windows 7 x 64.

  I'm really looking for a way to get Windows Defender to rework.

  First of all, it's what I already know and what I don't want:

  • I don't want to disable Windows defender, I want to make it work again
  • I have no antivirus uninstalled or disabled Windows Defender software, the module really seems to be corrupted (I am software engineer)
  • I don't want to reinstall Windows or use the backup, because I don't know how far I have to go back
  • Windows Defender can be removed from the menu of functions and software, because it is part of the operating system
  • I do not have MSE installed, tried to install it, haven't changed a thing

  Any solution to solve this is appreciated. Advanced solutions (Registry hacks, enveloping, manual installs, work...) Welcome!

  Kind regards

  Florian

  I was able to fix this on my own. It seems that the registry has been damaged (as I thought).

  Changed the DisplayName property is property in the register of "Windows Defender" to "@%ProgramFiles%\\Windows Defender\\MsMpRes.dll,-103" which in reality should not be the cause of the problem, however, the DisplayName property original of the resource file.

  ServiceDll property have been replaced in the registry of
   
  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 c, 00, 65, 00, 73, 00, 25, 00, 5 c, 00, 00, 69, 57, 00, 6F, 00, 64, 00, 6f, 00, 00, 73, 77, 00,------.
  20,00,44,00,65,00,66,00,65,00, 6F, 00, 64, 00, 65, 00, 72, 00, 5 C, 00, 6 D, 00, 00, 70, 73,------.
  00,76,00,63,00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  TO

  hex (2): 25, 50, 00, 00, 6f 72, 00, 00, 67, 00, 72, 00, 61, 00, 6 d, 00, 00, 46, 69,--------.
  00, 6 C, 00, 65, 00, 73, 00, 28, 00, 78, 00, 38, 00, 36, 00, 29, 00, 25, 00, 5 C 00, 57, 00, 69, 00,------.
  6th, 00, 64, 00, 6f, 00, 77, 00, 73, 00, 20, 00, 44, 00, 65, 00, 00, 65, 66, 00, 6F, 00, 00, 64, 65,.
  00,72,00, 5 c, 00, 6 d, 00, 70, 00, 73, 00, 76, 00, 63, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  in fact, which solves the problem. WIndows Defender is now in service yet. Updates can also be installed again.

• Error message on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  Can someone advise?

  These last messsage of error on one of my two Windows 7 PC, 64-bit. "The Apple software update server could not be found.  "Check your internet settings and try again.  My second Windows 7 PC Apple Software Update works normally.  The Apple software update version is 2.2.0.150.  Can anyone tell how to fix this?

  I have the same problem and I don't want to lose my content. App Apple Software Update doesn't work