audio loss on mavericks mbp.

Similar Questions

• audio loss

  audio loss in mavericks intermittently possibly after flash update, set by the sleep and wake up... anyone find a cause and cure for this yet?

  Try to uninstall and then re-install.

  Adobe Flash uninstaller

  Adobe Flash Player

• Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

  Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

  Hi BarbaraWolfe,
   

  There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.
  Re-install the driver by downloading it from the link given:
   
  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000
  Additional reference on:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Check if that helps.

• Audio loss on QC 58

  Can anyone help? I have a Compaq CQ 58 (Nr C1Z98EA #ABE) running under 64-bit Windows 8 and often lose sound. Windows indicates that A) speakers and drivers are ok, and B) the audio device is being used by another application. When I troubleshoot 'Peripheral' convenience store advises "convenience store made a few changes to your system. Try to try the task you were trying before. "After that the speakers work until the next loss - again and again...

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Running Snow Leopard and Mavericks, MBP 2009

  I have a MacBook Pro mid-2009 (4 GB of RAM, 2.26 GHz, 160 HD) which is running Mavericks (10.9.5). I have problems with iTunes (12.3.1) find my library since I copied the files to my Time Capsule to an HD station. I have researched and followed the instructions, but my library, but cannot be found on the disc, and also he will not find on my Time Capsule or other.

  I thought I would downgrade to Snow Leopard, but opening (3.5.1) should Mavericks. Now I think running two Mavericks for when I need to use Aperture and Snow Leopard for iTunes and most everything else, because it seems to play more enjoyable with my MacBook.

  How would be better in this respect? My Aperture library and iTunes are on a 4TB post HD all is supported with a second to 4 post HD. I'm a newb when it comes to such things. I read that "performing two partitions or drives multiple is the best way to handle this and provide most compatibility as opposed to virtualization". Someone said as I could "boot from the DVD and use disk utility to create a new partition on the internal drive. Install Snow Leopard. You can start and then in what operating system never desired. "I guess that means that two partitions on my hard drive or an OS on my HD and the other on the ext HD.? If so, what would be better? Could I put the Mavericks on the HD Ext. and Snow Leopard on my MacBook HD?

  To complicate matters, I live in America where Macs are rare. I know that in my city of 1 million a Mac tech. My Spanish is good, but I don't speak well, even in English, computers and looking for advice or ideas before you have the tech to do anything, thinking that he can just do everything is faster and more convenient for him. I also wonder if I can do it myself, since I have backups Time Machine going back to before I installed the Mavericks, but would probably have a tech do it anyway. I just want to know what precisely I would ask him to do.

  As you say, your options are either have multiple partitions on your internal drive OR install the OS 2nd on an external drive.

  [EDIT]

  If you have multiple partitions on your internal drive...

  • You can run lack of disk space on one or two partitions according to what you save on partitions
  • It is convenient because you do not have to carry another device with you.
  • If a disk fails, you lose the two partitions

  If you install 2nd OS on an external hard drive...

  • you will have more disk space for the two operating systems work with
  • less convenient, because you will need to have the external drive to use OS 2

• H8 - 1420a with Windows 8.1 audio loss

  Hello

  Anyone has a solution or know when new audio drivers will be available for the nsce HP h8 - 1420a for windows 8.1 64-bit?

  I tried to restore the drivers original from the page by using the winzip driver update and support to locate the new driver, but none of them solved the problem.

  At the present time, I have no sound availabe.

  Please download and install the audio driver from the following Internet link that would solve audio problems:

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

• Help audio loss on a single session and other failures occurred

  Hi for some reason that I lost the audio on a session only multitrackAll .in other sessions play ok / tracks in this game session to edit and see the plays on the bar of the multi meter but no real audio also heard.  Even more annoying is that now if I click anywhere on the taskbar while playing a session it will stop. I don't am unaware of changes in hearing but vaguely recall possibly hit another key while pressing the space bar, any advice greatly appreciated thank you.

  Eedcam wrote:

  The tracks in this game session to change and heard the show as playing on the bar of the multi meter, but no real audio.  Even more annoying is that now if I click anywhere on the taskbar while playing a session it will stop. I don't am unaware of changes in hearing but vaguely recall possibly hit another key while pressing the space bar, any advice greatly appreciated thank you.

  If the transport is running, and you don't hear anything, then at least your audio device is always connected. If it was not connected, you would get even transport to start. On this basis, I suggest to have a watchful eye on the mixer and see if you have accidentally done something like the master of channel inhibition, or accidentally hit the potentiometer to zero. In the circumstances you describe, it's about where to got to be, in my opinion, especially if it's only on one session your problem.

• How do you overlay images in video without audio loss of the comment behind it?

  I'm making a video that starts with the comment. I want to show images while the person speak always in the background. How do I do this with Windows Live Movie Maker?

  Support is in the Movie Maker Forums:
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?TM=1349183784260

• Length maximum Blu - ray HQ with H.264 and audio 5.1

  Greetings,

  I'm trying to get through my first project after the upgrade to CS6 and although I searched on this subject, I have not found a solution.

  Previously, I used CS5 and encoded in MPEG-2/HQ/VBR2 1440x1080i (corresponds to the source) and coding for 5.1 audio Surcode produce of the Blu - Ray.

  It seems that CS6, and improved video codecs, the impulse is to start using the H.264 or MPEG-2.  Don't I have that right?

  I am aware, there seems to be some problems with 5.1 audio and different encoding presets, but I do not like I encode my audio and video separately in order to bring them in again.  Impossible to believe that we STILL have to do that...

  Anyway, if I am not mistaken, it is preferable to use H.264 now, so my question is this:

  What is the duration of maximum quality project (which fits on one disc BD SL) if I use H.264 as the encoder of 1440x1080i, high quality, with a 5.1 audio soundtrack?  My source material is HDV if it matters.  I guess a related question is with H.264, what are the recommended settings/bitrate in order to obtain a maximum or high quality with this codec?  I had it all figured out for MPEG-2!

  Thanks for the ideas,

  BJBBJB1

  It's an interesting question, although I have no SOUL CS6, only SOUL CS5.5.

  I do not think that the video codec should really matter for the calculation of the amount of space taken a particular, although transmission speed if you are using a rate higher for audio, which will count.

  for example. a video (no audio) encoded, particular long with an average bitrate of 20 Mbps with the H264 video codec would take the same amount of space as 20 Mbps video (no audio) encoded with Mpeg2 codec.

  These are the raw numbers:

  for example. (all other things being equal):

  A 2 hour Mpeg2 video encoded at an average of 20 Mbps would take about 17,58 GB

  A 2 hour video H264 encoded at an average of 20 Mbps would also take about 17,58 GB

  It seems that CS6, and improved video codecs, the impulse is to start using the H.264 or MPEG-2.  Don't I have that right?

  I do not have CS6, but in terms of image quality at a given flow, H264 should give a better image quality than Mpeg2.  (as a very rough idea - and that perhaps not quite correct, but I think at low bitrates (around 10 Mbps?)) H264 is supposed to be equivalent to a mpeg2 to double the speed of transmission).  for example. 10 Mbps H264 might look roughly the same as a 20 Mbps Mpeg2 video.  Although at much higher rates and the same resolution HD, the difference will be less, or so high enough bitrate, it probably will not be a difference).

  BJBBJB1 wrote:

  What is the duration of maximum quality project (which fits on one disc BD SL) if I use H.264 as the encoder of 1440x1080i, high quality, with a 5.1 audio soundtrack?  My source material is HDV if it matters.  I guess a related question is with H.264, what are the recommended settings/bitrate in order to obtain a maximum or high quality with this codec?  I had it all figured out for MPEG-2!

  I do not have CS6, but I guess it also depends on how much space the audio track takes up.  You use a codec audio lossless or loss?  About what average bitrate is your audio (if this will depend on what your audio lossless)?

  Unless she uses a higher rate for audio, the duration, you can keep on with H264 would be identical to Mpeg2 - although H264 should give you a better image quality than Mpeg2 the same transmission speed, you could probably reduce the video bitrate compared to how you would with Mpeg2.

  My brute (perhaps not entirely accurate) Calc:

  Total average bitrate 18.9 Mbps would give you about 3 hours of video with audio on a 25 GB disc (for example if the audio was about 4.1 Mbps and video 14.8 Mbps).

  Total average bitrate 28 Mbps should give you about 2 hours of video with audio on a 25 GB disc

  Total average bitrate 35 Mbps should give you approximately 1 hour 37 minutes of video with audio on a 25 GB disc

  ---

  In the preset for ' level Bitrate: high "in CS5.5, with a resolution of 1440 x 1080, with a high profile, level 4.0/4.1, it gives a flow target for video (no audio) of 18.75 Mbps

  If we assume audio is about 4.1 MB/s (the real value will depend on the real Mbps of your audio files),.

  This would give a total average bitrate (video + audio) of 18.75 + 4,1 MB/s = 22.85 Mbps

  To 22.85 Mbps total for medium flow, it should give you about 2 hours and 29 minutes (ie. about 24,94 GB), but you would need to leave a little space for menus (maybe assume the durations you can adapt are a little less that this is safe).

• What should I do when the audio track in my calendar will not play during video playback after?

  I was editing my video and had to add new narrative.  When I did, all the music in the audio track has stopped playing during playback.  Narration is there and everything is as it is supposed to, but music in the audio will not play and I do not have the track muted.  Thank you

  saldurkin

  What version of Premiere Elements and on what operating system?

  From your description, this seems to be a known issue with elements of first 12/12.1.

  If so, please explore the solution offered by Llamadude and used with success by others according to the Llamadude, or with a change of the

  the original Llamadude solution. Please read the details in the following

  http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html

  Please let us know if it works for you and give more details.

  Thank you.

  RTA

• audio not imported on the timeline. Please help me. I'm going crazy

  Hi, I use a macbook pro after years of windows. I upgraded my Adobe CC software. I was using before CS6. I work with usually. MTS has clips that I have a camera video sony.

  The problem is that as the mac does not read that these first files does not recognize them either. I called Apple support and they told me to look for an app on the app store that I had to convert them. I did and I converted to mp4.

  I use a project that I've already started on a PC. On the section of the project, I changed all the sequences and it worked with the clips that I already had on the timeline. The problem is that if I want to import a new clip or part of a clip on the timeline of the section of the project or the audio source does not appear and there's the little yellow triangle with the '! ' indicating an audio loss as summer disclosed. In contrast, audio works if I play the clip in the source section.

  Thanks for your help

  Please try this: from the SD card, copy all THE files and folders on your hard drive. All of this, do not alter the content. Then in the first, use the "media browser" actually import the images. This often allows various issues. First CC should be able to manage your clips natively without messing with the converters. The media browser method works much better than "file > import"-assuming you have any content intact card and NOT just only .mts files.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• WTR320N still slow after upgrade

  Today, I upgraded my LAN 10/100mbps to 100/1000 Mbps Wireless LAN using the Linksys WTR320N with. The initial tests took place without problems. The small local network set up with 2 laptops, router and modem worked well and I plugged in the other systems.

  During the test, the speed of the internet was as before, instantaneous loading of most of the pages (Facebook, Youtube, etc.) and reaches the maximum capable speed, which is 23MBps with a low ping about 30.

  Now, with the entire network, the internetspeed is not top 20MBps more, it sticks to 15-17, which is a loss of 6 Mbps on my connection. After checking on various topics on other forums, I upgraded the firmware of 1.0.0.3 for 1.0.0.4. Who gave a small improvement, but I can't yet reach my speed max, neither a decent ping and pageload time.

  I'm a cable internet provider that requires no password/username to log, so it is a permanent connection. MTU is 1500, and because I don't know what it is (I've seen the expression and change it to 1300/1350. a few times looking for a solution).

  No idea how I can speed up the loadtimes and the internetspeed?

  [EDIT] problems are both on cable in Wi - Fi. The signal strength of the wireless is maximum and never given wired connections problems before.

  Change the MTU to 1365.

  You have already updated the Firmware of the router.

  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset and wait for 10 seconds. Power cycle the router and reconfigure the router.

• Losing his helmet

  I have Xperia S with the new firmware.

  When I plug in the headphones, supplied with the phone, all right. However, if I move the decision-making, even a little very little, the device acts as if I disconnected them. It's annoying because you can't have COMPLETELY supported taking all the time you listen to music.

  I tried with another helmet too, and the problem is the same.

  Dirty decision cause this complete audio loss even for a microphone signals making movement? (I don't have the phone for very long, since the month of June.)

  If you put something in it, make sure that it won't break easily, is no driver (not of metal), be nice and switch the phone off beforehand. Do not use solvents or any type of liquid, as this could damage it.

  However, if you see no obvious obstruction, just blow away any dust that could be the cause of the problem.

• I don't hear the music and video sound more! (only the voice above) Can someone help me?

  I'm doing a video, and now I hear that voice over, when I play the video in first 12 items...

  Can someone help me?

  marcolk

  What operating system is running your 12 items first? Have you updated 12 refreshing 12.1, using Help Menu/implementation of an open project?

  For your immediate problem... There is a known issue with Premiere Elements in which the sound is lost on audio tracks numbered and soundtrack when the narration with Narration of the program tool is added to the project. I suspect that you have fallen into this number indicated by many, but not all.

  An appeal was given by the ID Llamadude 99 and this appeal as well as modifications of it worked for the most part to solve the problem.

  Please read the following for details and then let us know the result.

  http://www.atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html

  We will follow your track to the top.

  Thank you.

  RTA

• Blu - ray - why are H.264 motion menus re-transcoded in MPEG2?

  I have a project of BR 720p50 with motion menus. During the generation of the BR menu motion disc are re-transcoded by again to MPEG2 eventhough the project default conversion settings are defined in the format H.264, 1280 x 720, 50 images per second. Media on the timelines do not re - transcode in MPEG2. Yes, I can find the .m2v in the Sources\Menus folder.

  Transcode transcode status/BR BR settings for the movement of the menus are / are defined for transcode Don t.

  I have no audio in menus of movement and they are transcoded h.264 in Adobe Media Encoder CS5 @ CBR, 11,11 MB/s, so the baud rate Maximum video Audio/Maximum @ 15.0 Mbps in still should be ok. (All media in the project are trancoded with SOUL CS5 @ the same settings as well).

  I have transitions between each menu and they are not re-transcoded in MPEG2, so menus chapter and menu are re-transcoded then transitions are left intact by again. I can read the disc burned with no problems.

  It seems strange to create motion menus to the H.264 format to see their re-converted to MPEG2 in Encore CS5.

  No one knows why this happens?

  / Roger

  There will be no problems with the menus of mpeg2 and h264 video. You can mix and match all different codecs, resolutions, display rate on a Blu - ray disc without any problems.