audio loss

Similar Questions

• Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

  Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

  Hi BarbaraWolfe,
   

  There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.
  Re-install the driver by downloading it from the link given:
   
  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000
  Additional reference on:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Check if that helps.

• Audio loss on QC 58

  Can anyone help? I have a Compaq CQ 58 (Nr C1Z98EA #ABE) running under 64-bit Windows 8 and often lose sound. Windows indicates that A) speakers and drivers are ok, and B) the audio device is being used by another application. When I troubleshoot 'Peripheral' convenience store advises "convenience store made a few changes to your system. Try to try the task you were trying before. "After that the speakers work until the next loss - again and again...

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• H8 - 1420a with Windows 8.1 audio loss

  Hello

  Anyone has a solution or know when new audio drivers will be available for the nsce HP h8 - 1420a for windows 8.1 64-bit?

  I tried to restore the drivers original from the page by using the winzip driver update and support to locate the new driver, but none of them solved the problem.

  At the present time, I have no sound availabe.

  Please download and install the audio driver from the following Internet link that would solve audio problems:

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

• Help audio loss on a single session and other failures occurred

  Hi for some reason that I lost the audio on a session only multitrackAll .in other sessions play ok / tracks in this game session to edit and see the plays on the bar of the multi meter but no real audio also heard.  Even more annoying is that now if I click anywhere on the taskbar while playing a session it will stop. I don't am unaware of changes in hearing but vaguely recall possibly hit another key while pressing the space bar, any advice greatly appreciated thank you.

  Eedcam wrote:

  The tracks in this game session to change and heard the show as playing on the bar of the multi meter, but no real audio.  Even more annoying is that now if I click anywhere on the taskbar while playing a session it will stop. I don't am unaware of changes in hearing but vaguely recall possibly hit another key while pressing the space bar, any advice greatly appreciated thank you.

  If the transport is running, and you don't hear anything, then at least your audio device is always connected. If it was not connected, you would get even transport to start. On this basis, I suggest to have a watchful eye on the mixer and see if you have accidentally done something like the master of channel inhibition, or accidentally hit the potentiometer to zero. In the circumstances you describe, it's about where to got to be, in my opinion, especially if it's only on one session your problem.

• audio loss on mavericks mbp.

  man I'm tired of this site... I am asking a simple effing I have beeen round in circles for 30 minutes... question first of all you can create or add content here...? What? its my account... wttttffff... so now, I have two problems instead of one... I have a question and I can't ask for it... now, I have to ask a question on why I can't ask a question... feckin holy moly, I try to follow a siggestion on why I can't ask my first question IE. Select a group to direct my question... I find none of the listed groups even approach my question so I click post to see if it crashes again, it's not, it shows me my posted question... I did not so much information I would have liked cause I was doubtful it would issue... then I noticed that his Envoy under questions... snow leopard seriously? I mean seriously effing...

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Feedback - Apple Support

• How do you overlay images in video without audio loss of the comment behind it?

  I'm making a video that starts with the comment. I want to show images while the person speak always in the background. How do I do this with Windows Live Movie Maker?

  Support is in the Movie Maker Forums:
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?TM=1349183784260

• What should I do when the audio track in my calendar will not play during video playback after?

  I was editing my video and had to add new narrative.  When I did, all the music in the audio track has stopped playing during playback.  Narration is there and everything is as it is supposed to, but music in the audio will not play and I do not have the track muted.  Thank you

  saldurkin

  What version of Premiere Elements and on what operating system?

  From your description, this seems to be a known issue with elements of first 12/12.1.

  If so, please explore the solution offered by Llamadude and used with success by others according to the Llamadude, or with a change of the

  the original Llamadude solution. Please read the details in the following

  http://atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html

  Please let us know if it works for you and give more details.

  Thank you.

  RTA

• audio not imported on the timeline. Please help me. I'm going crazy

  Hi, I use a macbook pro after years of windows. I upgraded my Adobe CC software. I was using before CS6. I work with usually. MTS has clips that I have a camera video sony.

  The problem is that as the mac does not read that these first files does not recognize them either. I called Apple support and they told me to look for an app on the app store that I had to convert them. I did and I converted to mp4.

  I use a project that I've already started on a PC. On the section of the project, I changed all the sequences and it worked with the clips that I already had on the timeline. The problem is that if I want to import a new clip or part of a clip on the timeline of the section of the project or the audio source does not appear and there's the little yellow triangle with the '! ' indicating an audio loss as summer disclosed. In contrast, audio works if I play the clip in the source section.

  Thanks for your help

  Please try this: from the SD card, copy all THE files and folders on your hard drive. All of this, do not alter the content. Then in the first, use the "media browser" actually import the images. This often allows various issues. First CC should be able to manage your clips natively without messing with the converters. The media browser method works much better than "file > import"-assuming you have any content intact card and NOT just only .mts files.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Losing his helmet

  I have Xperia S with the new firmware.

  When I plug in the headphones, supplied with the phone, all right. However, if I move the decision-making, even a little very little, the device acts as if I disconnected them. It's annoying because you can't have COMPLETELY supported taking all the time you listen to music.

  I tried with another helmet too, and the problem is the same.

  Dirty decision cause this complete audio loss even for a microphone signals making movement? (I don't have the phone for very long, since the month of June.)

  If you put something in it, make sure that it won't break easily, is no driver (not of metal), be nice and switch the phone off beforehand. Do not use solvents or any type of liquid, as this could damage it.

  However, if you see no obvious obstruction, just blow away any dust that could be the cause of the problem.

• I don't hear the music and video sound more! (only the voice above) Can someone help me?

  I'm doing a video, and now I hear that voice over, when I play the video in first 12 items...

  Can someone help me?

  marcolk

  What operating system is running your 12 items first? Have you updated 12 refreshing 12.1, using Help Menu/implementation of an open project?

  For your immediate problem... There is a known issue with Premiere Elements in which the sound is lost on audio tracks numbered and soundtrack when the narration with Narration of the program tool is added to the project. I suspect that you have fallen into this number indicated by many, but not all.

  An appeal was given by the ID Llamadude 99 and this appeal as well as modifications of it worked for the most part to solve the problem.

  Please read the following for details and then let us know the result.

  http://www.atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html

  We will follow your track to the top.

  Thank you.

  RTA

• The video is blurry

  Currently using Photoshop Elements 4.0 and Premiere Elements 2.0.

  I created a slide show in photoshop elements and exported to DVD NTSC file.

  Photoshop creates a .wmv file that I then imported into first.

  I put the slideshow to 80% scale so that the text on the pictures would stay within the boundaries of my TV while playing.

  However, some of these photos were blurred during playback.

  However, the .wmv file was perfect.  Don't know what happened.

  Yes, still images can be imported directly into the MOU. I resize the images to 1000 x 750 (to allow some panoramic with zooming) and also to define the term set in Edit > Preferences BEFORE import *.

  With respect to the source Audio MP3 files, some problem (it was suggested that those with integrated cover could be the root). PE will comply (CFA files) and also to generate PEAK (.) PEK - waveform display) for the MP3, PCM/wav 48 KHz 16-bit files and you should leave complete this process (bottom right of the GUI progress bar). The best way would be to go to the source of the MP3, if possible, as the MP3 is strongly compressed. Even with her in accordance with the standard, you will never recover the Audio loss. I only use MP3 as short SFX files and always use hearing (Audacity is an Audio editing program free and it will also make), before you import it.

  If I have a couple of programs of creation of slide show, I do all mine in 'Big brother.' PrPro, PE works perfectly and allows me to do all kinds of animations with still images.

  Good luck

  Hunt

  * Do not forget to reset the duration to your return to what you use for other projects. Once imported, it is either a process of setting the time by hand, or reset the duration and then do a re - import.

• Loss of sound after IDT High Definition Audio Codec update.

  HP Support Assistant says that a new driver IDT HI Def Codec is available, so I downloaded and installed 6.10.6417.0, after which I have no audio output. I don't know which driver version was installed before the upgrade, but I have since downloaded and installed 6.10.6330.0 and rebooted but still have no sound. The device is activated and if Windows says that it works correctly (which isn't, but then it is Windoz).

  I'm now totally at a loss as to how to proceed otherwise that a clean installation of Windows that, for obvious reasons, I'd rather not do.

  System details:

  HP Envy 14-2002ea Beats Edition runing Windows 7 Ultimate 64 bit SP1.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53281.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, stop the laptop.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• How to fix the loss of control of the audio volume?

  The speakers on my laptop work well, apart from any browser. However, in FF or IE audio volume is stuck barely audible, even if I have the volume of the wheel set up. I'm in a Windows XP, using FF 16.0.1 environment.

  After removing and reinstalling Flash Player 11, I noticed that the sound control on each video has been set to minimum. I just slipped the sound control upward at the bottom of the video in question, and I got sound. I don't know what caused the sound to zero at least, but the problem seems to have been resolved. I hope that more than a few hours this time.

• Envy 15: Loss of Beats Audio control panel after Windows 10 last updated

  Hello

  Does anyone know if the Panel Audio Beats will be available again?

  After the last update to Win 10 I lost the control panel and also my Bass speaker didn't work on the external speakers. Finally I sorted out the problem of speaker by selecting another driver in Device Manager.

  The most recent update to Win 10 was 1607.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K