audio service or no sound when you use the computer in safe mode with network

Similar Questions

• Try to use remote desktop to connect to a computer in safe mode with networking

  I'm trying to troubleshoot a remotley pc on the network using remote desktop. I can connect properly, however, I want to continue to solve the problems with the pc remote in safe mode. When I choose to restart the pc in safe mode with network remote I am unable to connect to this computer by using remote desktop. Is there a certain config that I need to put in place inside msconfig which will restart in safe mode and I would still like access to connect to this computer by using remote desktop. Thank you.

  Hello

  @hoosier1077

  Assuming this isn't a general network problem (such as restarting changes to the local IP address on the remote computer).

  Maybe this can help.

  http://support.Microsoft.com/kb/315222

  http://support.Microsoft.com/kb/316434

• Screen goes black when you use the computer - Vista

  Original title: SCREEN GOES BLACK, COMPUTER STILL WORKS. A MESSAGE CAME ON A MIRROR SCREEN, COMPUTER WORKS FINE IN SAFE MODE
  COMPUTER STARTS SOMETIMES, BUT SA SEEMS IF THE NETWORK IS ON THE DISPAY GOES OFF, A MESSAGE CAME ON SCREEN MIRROR, EVERYTHING HAPPENED THIS WEEKEND. DID A FULL VIRUS SCAN, NO PROBLEM, DID SPYBOT AND SOME COOKIES WERE FOUND. vISAT OPERANTING SYSTEM.

  Hello

  If the computer is running in safe mode, then start in safe mode and perform a clean boot to verify if a third party program or service is the cause of the problem.

  Step 1:
  Start your computer in safe modeand try to perform a system restore, safe mode.

  Check out these links for more information about the system restore:
  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings  
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 2:
  Try to put the system in a clean boot.

  Refer to this article for help:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A beep sound when you use the Tablet after closing lid

  Hello

  I'm having a problem that drives me crazy!  When I cover my laptop closed for awhile in its docking station, or on the battery, when I opened the lid and start using the key pad, the device beeps loud and a bunch of random windows pop up on the screen.  The only way I can fix it is to force the closing down and then restart.  This cannot be good.

  Any help is appreciated!

  Pat Immel

  HP Elitebook 8730w running Widows 7 64-bit, 8 GB of ram

  Hey mocheesehead,.

  I'm sorry that you use in this issue do beep. I would suggest trying a hard reset as the first, fastest and least invasive stage. This can sometimes fix strange problems because it drains all the electricity unit.

  Steps to a Hard Reset

  Shutdown

  The laptop out of the dock and disconnect all connected devices

  Remove the battery and power cord

  Hold the Power button for 10 seconds

  Replace the battery and power cord in

  Return-turn on the laptop and test to see if the problem has been resolved.

  If you still experience the problem, I also suggest to download the latest version of the BIOS F.20 and the latest Synaptics driver version 15.0.24.

  I hope this helps! Let me know the results when you get a chance please

• How to connect to itunes when you use the computer chrome?

  How to install chrome computer?

  Sorry, Apple doesn't support Chrome - actually it is questionable whether or not they really support Windows.

• How to disable direct sound when you use a plugin for guitar?

  I use the Waves GTR plugin for recording guitar in Logic Pro X, but because it puts a lot of pressure on the CPU, I tried he governs through a "bus" instead of having the plugin separately on every guitar track. The difference is that when I use the bus option, I can't seem to get rid of dry direct sound which is obviously very embarrassing. The only way for me to get rid of the direct sound is to use the RTM plugin on every guitar track that quickly causes the overload program when using several of these titles.

  Anyone know how to get rid of the direct sound when you use the alternative of bus for the guitar tracks?

  just at the exit of the guitar channel strip no output. This way you won't hear at the follow (because the dry track will not be transmitted to any output)

• When you use the side scroll bar, it will automatically return to the top of the page

  When I'm on a page and use the side scroll bar, I scroll down, but as soon as I stop, it automatically back upward. Can you help me?

  * original title - fix side scroll bar *.

  Hello

  I would suggest that test you the problem in Safe Mode with networking and clean boot.

  What are results in Mode safe mode with networking and clean boot?  After the return.

  If the problem persists in both modes, I would like also to suggest that you reset the mouse settings to check the issue. -Arthur Li - MSFT

  Go to the site of the manufacturer of the computer and search for updates of your video card drivers. -Marilyn O - moderator

• Impossible to activate the services on VMKernel adapter when you use a custom TCP/IP stack

  Hello

  Very strange error.

  Unable to activate services on VMKernel adapter when you use a custom TCP/IP stack.

  Added custom stack by using this command: esxcli network ip netstack add n = "10 GB"

  Using the GUI to add the adapter to a normal vswitch.   By choosing the new battery, all services are grayed out.  (at time of pick their all first on the stack on the other, then change to the new battery, it shows in preview before pressing the finish)

  running on vcenter build camera 5.5 1440531

  ESX 5.5.0 1439689 (VSAN release)

  No idea what could be the problem?

  Stack additional TCP/IP is not fully functional to 5.5 for vmkernal services.

  Note this:

  Documentation Centre of vSphere 5.5

  You can activate services for the default on the host computer TCP/IP stack.

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• MainStage "lag" when you use the SPACEBAR as 'play '.

  Hi all, I'm relatively new to Mainstage (V3), and I'm hoping to use it for the first time this weekend to play the extra backing with a band tracks

  The issue I'm having, is that with the SPACEBAR of laptops on 'PLAY '. It is often "lag". or simply does not start the song. I have to wait a second, then hit again, it will work.  It is almost as if in Performance mode, when you use the down arrow key to select the next song, the 'focus' is on the list of patch, and if I click in the background where are playback buttons and stop, THEN that will work. I have not, however, been able to reproduce this particular behavior on a consistent basis.

  Everyone knows the same thing? Or why it is so 'all or nothing '?

  And a question important much donor... I gave all my reading titles to the waveform appropriate the other night (so I could visually see the waveforms above the attenuator as offers of backing track model), however, once I was moving songs in a different order, which stopped working. No idea why?

  Thnaks in advance

  About the offset by hitting the space bar, a thought occurred to me.

  How Mainstage allocates 44.1/16 bit wave files used in the reading plug-in? Which means, when a song is selected, which uses, for example, to separate the 5 cases of reading, one can assume that these audio files used in that song would need to "load" first.

  Anyone know if this is how Mainstage works?

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• TestStand crashes when you use the feature of LENGTH

  So I have a problem when you use the TERM built on stage.

  the first time I run my sequence everything goes normally...

  the second time I try to run the sequence it freezes teststand.

  I have notices that when I run my sequence. I can see on TRACK OR the following:

  niSE_opensession

  niSE_connect (routex)

  nise_disconnect.

  but after that the sequence is complete. It is not close to the niSE sesion. that this has something to do with the gel TestStand?

  If this isn't the case, have you had this question before?

  I contacted pickering... they got me new drivers

  Response of Pickering:

  It sounds like the problem which came first when NEITHER Visa has been changed, version 5.2 or higher, I think. In any case, I'll try first to install the latest version of the Pickering IVI driver.

  http://downloads.pickeringtest.info/downloads/drivers/IVI/pi40iv_4.10.1.exe

  I installed them and it works now...

• When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

  When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

  Windows Media Player is not a Publisher.

  You can use Windows Movie Maker to split
  and combine audio files, but it works better
  If they are in the. WMA format.

  Also the free Audacity software may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity

  http://Audacity.sourceforge.NET/

  How to split a long recording into multiple files or CD tracks?
  http://Audacity.sourceforge.NET/Help/FAQ?s=files&i=split

  How to combine two files into one longer file?
  http://Audacity.sourceforge.NET/Help/FAQ?s=editing&i=join

  How to mix songs with Audacity
  http://www.ehow.com/how_5061510_mix-songs-audacity.html

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• How to enter the character ü when you use the pinyin keyboard?

  How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.

  The keyboard pinyin-simplified is for entering the characters han, not latin.  If you want to type the latin pinyin, you must use the extended ABC keyboard configuration.  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html