Audio sync across several clips

Similar Questions

• How can I match volume across several clips levels?

  Let's say I have two clips:

  (a) a clip with speaking people - its a little low is recorded

  (b) a clip with people talking and a loud noise (eg. a shot) in the Middle

  How to match the audio levels so that people are talking at the same volume in two clips?

  "Normalize" does not work because he smashes the gun to the Center (2).

  Looks like a very basic requirement for video editing. There must be a way to do it automatically... but I can not find one.

  Do manually is very time-consuming and error-prone (the human ear are not good to corresponding to levels of volume on hundreds of clips).

  This tutorial can help you:

  Premiere Pro CC: Pushed and smooth Audio levels. Final Cut Pro Training & Classes

• How to apply the look across several clips

  In Adobe SpeedGrade, I look and I know how to apply it to a clip.  How to apply to multiple clips?

  If you're the direct link of first, I add an adjustment in the first layer and add the SpeedGrade LOOK to this adjustment layer.

  If you have something like a multicam editing, and all of your scenes are broken up, as in scattered amongst many other cuts, I do not add looks like this sequence. I add the LOOK to the source sequence.

• Audio Out of Sync and Insert Clip out of a framework

  I record my audio and video separately. I use the merge Clips feature to merge together, now made dozens of times, never a problem. He did it with this new project, everything looks and sounds very good.

  But when you change the pieces of an element in a sequence, each inserted bit is the "audio is out of sych" red text. It is out-of - 0:72 to a clip or - 0:87 for another.

  However, it is not enough for me to see when I play it back, so I did fi from it as I change. Sometimes I slip in sync to remove the red text, I can't make a difference.

  But also sometimes when I insert an element in the current sequence, the marker/cursor script (don't know what it's called, the line blue large marking this place in the sequence where everything I insert will be inserted) is disabled by a frame. Sometimes it's off in one direction, which means that I get random empty images in playback, or it is off in the other direction and I am slowly accumulated unique axe off executives.

  Someone has an idea of what's going on? How the audio is out of sync in the first place? Why the function Insert Clip move the cursor in a strange place?

  Nevermind, I figured it. I chose the wrong preset when I made a new sequence. 60 frames per second instead of 59.whatever. >.

  Thanks to reddit for the answer: Audio Out of Sync and Insert Clip Off By A Frame: first

• should audio sync - I separate sync audio markers?

  Here's the background...

  I have been using Cyberlink Power Director for several years because I like it's multi camera workflow, but I am frustrated by its stability with large projects and get frustrated when it crashes on me without reason... so I decided to try the Premier Pro.

  I do the video for my son's hockey team, I use 4 cameras (2 x GoPro 3 black behind the goals and a 2 + Contour on the center of the ice ;.) NEX6 from Sony on tripod as the cam now I use a Zoom 4 for a clean audio track.)  I shoot at 1080 p 60 fps.

  Each game takes place in about 1 hour and 20 minutes.  The GoPro generate files of 3 or 4 per game to just more than 3 GB each; the outline of 2-3 records. and the Sony 6 or 7 files.  So I find myself with about 17 or 18 files per game, including the audio file of Zoom.  Each camera audio varies according to spectators standing near them, and action cameras are mounted on glass, aspiration so that they are somewhat isolated from the action on the ice.  There is no possibility of tap create synchronization markers, and I stop the Sony during period breaks to save battery power, so they are not all contiguous files.

  In Power Director, I drop the files of each camera one track in the MultiCam Editor, as well as the audio file and hit the sync by Audio button... successfully synchronizes 90% of cases.  It will sometimes miss a shorter file, and it's always one of the contiguous files, so I have never a problem manually a fall where it should be.

  I tried Premiere Pro this week, since I got my editing carried out earlier than usual, but the Audio synchronization failure.  I tried a simple test to fall just two files, I know, on the timeline, and synchronization using the audio just on the regular calendar synchronization, but it didn't.  I tried several different pairs of clips, but no sync.  I created a new project in Power Director and dropped the same two files on the timeline and use the synchronization of Audio and files were sync had no problem.

  My question is... MPCC must more separate audio markers, and my tracks audio remote and deaf hockey forever give me grief at the CCPP?  I'm always amazed at how good PD synchronizes, since it must be able to match the whistle blows and the thuds of pucks hitting the boards, among all the background noise local spectators at various locations around the ice... I'm doing something wrong, or PPCC's simply not going to do it for me?  (I looked at a dozen tutorials Multi Cam and Audio Sync, and I think I make any sense?)

  Thanks a lot in anticipation!

  www.Vimeo.com/Channels/pmlbb

  I can't synchronize audio in the timeline panel. I select the clips imported project of first pan - select all holding the key ctrl (Windows) > right click > pop-up > choose 'Create multicamera Source Sequence' and choose Synchronize as "Audio".

  So, if you do this and first cannot find synchronization, it's sad because your other software can.

• Remove attributes several clips 15.3

  Does not work. I select several clips (of audio clips in this case), click 'Remove the attributes' (since for some reason any you got rid of the "effects of removal"), deselect the EQ effect in the window, click OK and NOTHING happens.

  You must Select the effects you want to remove.

• Make several clips - issues in length

  I have made a ranking of FCP (separate scenes) Media Manager and made my SpeedGrade calendar in several clips by selecting src. PathElement in menu file name.

  The duration of the timeline is 03:33

  Each element rendering is 03:33 length; they normally play and freeze on the last picture for the remainder of the term.

  Anyone experience this problem?

  Thank you!

  Yes, this is a known issue, it happens when there is currently audio. I hope that this will be fixed in the new version.

• Effects on several clips via dynamic link with Pr Pro - CS4

  Is there a way to dynamically bind several clips from Pr Pro CS4 for Soundbooth so that all audio clips can have effects applied simultaneously? I mean, I really have to do each audio clip separately?

  Thank you.

  Paul

  Hi Paul,.

  No, Soundbooth creates a single file for each clip and effects are applied based on the sequence by sequence, although the presets can be created and applied to the additional clips.  It may be interesting to note that Soundbooth is longer that the CS 5.5 release next month and has been replaced by the CS much more capable 5.5 hearing which offers more control over your audio files and integrates with much better first.

• Import audio data - window of Audio sync not opening during the audio broadcast on multiple slides

  Hello

  I am importing PowerPoint files in Captivate 4 with the view with audio recorded separately on top of these PPT Slides.

  The PowerPoint file and associated slides to import with no problems. When I import the audio in the timeline view, it treats the MP3 file without any problem and adds the audio file to the library and the first slide. I can get the window asking me how I want to import the audio, to shich, I select the audio acorss to distribute several slides option.

  In previous versions of Captivate, the Audio sync popup then appears to allow me to choose at which points to divide the audio between slides. Unfortunately the Audio Synchronization window does not appear.

  My system Details are as follows:

  -PowerPoint 2007 slides

  -Captivate 4

  -Windows 7

  No reason as to why this problem occurs?

  M.

  Hello

  Please try to open the Captivate as an administrator-

  Solution 1:

  1. go to the Captivate installation location. Generally, it is present here-

  C:\Program Files\Adobe\Adobe Captivate 4

  2. right click the "AdobeCaptivate.exe' and select 'run as administrator '.

  3. now try to run the same steps. It should work

  If this does not work, try the following set of steps mentioned below.

  Solution 2:

  Close the Captivate and try the following.

  1. Identify the location of cmd.exe. Usually found in C:\Windows\System32\
  2. Click right-click on cmd.exe > select run as administrator
  3. Launches the command prompt
  4. Now, go to the Adobe Captivate 4 installation location. In your case, it may be C:\Program Files\Adobe\Adobe Captivate 4
  5. Now, run the command regsvr32 NSAudio.dll
  6. Once you get a confirmation dialog box, run the next command regsvr32 WaveEditCtrl.ocx
  7. Again, you should get a confirmation dialog box.
  8. Now launch Captivate and try the same steps. It should work.
  Kind regards
  Mukul

  Post edited by: mvlele

• Audio sync HDV capture error

  I have problems with the audio sync issues capture.

  I put the project settings for HDV 1080i30 (60i) - I accepted the default settings of the preset, I pointed the gun in the remote

  I have captured two clips... every ~ 20 minutes maximum.  Both have audio sync issues.

  The two clips captured images that included an empty staining in the band... ie. timecode was reset when I removed the tape from the camcorder during the trip.

  Two captured items have odd video bright red inserted for a second or two (is that a sign of a mistake?) in various places.

  Both show the following error message:

  F; \Video\Project1\Clip 02.Markus mgegError in MPEG stream detected around the frame 3502

  (there are about 20 these error messages in the events Panel)

  Suggestions?

  Thank you, in advance.

  -Mike-

  Premiere Pro CS3

  Camcorder Canon HV30 (mini DV tape)

  Link FireWire for capture

  second internal drive dedicated for video media

  Vista Home Premium 2 GB of RAM, 2 500 GB internal readers... lots of space left

  HP8187 DesktopE6750 Intel Core 2 Duo

  NVIDIA GeForce 8500GT

  HP LP3065c 30 inch LCD monitor (2560 x 1600)

  Red images are loss of images, the origin of the problems of Out-of-sync OOS.

  You can't address the loss of images, but you can avoid mistakes by HDVSplit OOS, a freeware capture program that is ahead of Adobe, allows to avoid these mistakes OOS, gives previews and scene detection.

• Problem with Windows Media Player Audio sync DivX playback in full screen

  Hello

  I have found lately that when playing videos on Windows Media Player divx mode full screen audio is out of sync.  If the video is played in window mode, there is no problem.  I had no such problem in the past, but now for about 1 month or so, I have this problem.

  I have fitted iq508a to vista 64-bit, with the latest drivers delivered HP installed (using the HP update utility)-does anyone else have this same problem too?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  I can't believe! I solved the problem with this problem of video audio sync during playback in full screen!

  While watching the Pineapple Express, I thought WTF I'll take another closer look at this, and while they were smashimg their cell phones so that they could not be found by triangulation, (don't ask - u just I have to watch - stoner movie )...

  in any case, I looked under tools options in WMP.  I unchecked the option on the performance tab "use video smoothing"-the video as reloaded and bingo! everything in harmony!

  BTW, I checked my another PC running Vista 32 bit and the option ' use video smoothing ' also exists and it is checked if this seems to be a problem with WMP works on Vista 64 bit or running desktop Touchsmart of WMP... In case I am much happier now...

• I had a red line on the audio portion of my clips why? FCPX

  can someone help me pls, I had a red line on the audio portion of my clips why? FCPX

  The red line shows that you have marked these clips as "rejected."  (and blue = keywords, green = favorite, etc..)

• How can I delete several clips at once from the timeline

  How can I delete several clips at once from the timeline?

  Thanks, Dan

  Shift-click or command-click to select if they are contiguous. Then press the delete key.

  Or select them and use the keyboard shortcut command + X.

  Or select them in the Index of the Timeline and use the key DELETE or command + X.

  Russ

• Change the audio level of many clips in the browser?

  I have 1000 or more clips in these images of GoPro project, cameras, and selects music, with many clips that have audio very strong especially the GoPro mounted on the vehicles off the road as they motor at high speed through obstacles. My edit in place includes 20/20 speakers, and even though I have a moderate level of audio that is configured for editing when I select images in the browser that has strong audio I need to stop and lower this clip in the browser at once and he eats a precious time.

  Is it possible to change the audio level in many clips selected in the browser?

  Select the clips.

  Go to the Clip > Audio Options > Audio Gain

  When the Gain Audio pane opens, set Adjust Gain of: -12

  

  Click OK. You can experiment on a clip or two to see if this gain reduction is too much or not enough for you.

  MtD

• Audio sync after the Edit

  Hi guys,.

  I have a question about the workflow - is it possible in first?

  1. I save the video and audio separately.

  2 do the editing with video files first (scenario A)

  3 synchronize audio with video files (scenario B)

  Is there a way automatically 'to' timeline B chronology A synchronized audio files so that I can read the A timeline with audio correct without manual synchronization?

  Hi Tomasz_CC!

  Here is a possible workaround. (I do this suggestion without anything about your project.) Basically, I would say a workflow / offline but rather broad proxy files, you will be connect to your synchronized clips.

  Here are two links that explain the concept of/off line and reissue of links in Premiere Pro:

  Create clips for offline editing in Premiere Pro

  Reissue of links media offline in Premiere Pro

  Here is my solution:

  1.) export your synchronized clips of "timeline" B with the EXACT SAME file names and the SAME EXACT duration. Having the same file name right is critical for the reissue of links in batches. Otherwise, you need to connect the elements one by one. With the same guarantees of exact duration that the content of your synchronized video files will correspond to the version not synchronized. You may need to cut your audio synchronized to video clips before you export. Export the synchronized versions of the video files to a new folder and name it "Synchronize" or similar. (This assumes you have enough storage space for this new medium.)

  2.) make a duplicate of your project. (Just for security.)

  (3.) in your project duplicate, select video files in your project, right click and choose «Make offline...» ». Choose "Media files remain on the disk" in the window to make offline.

  4.) with your video files still selected, right-click and choose «Link media...» ».

  5.) in the link Media browser, check the "republish other box automatically. Click search, and then navigate to the folder 'Synchronize' with your exported synchronized video files.

  

  6.) turn on the "display only exact matches name" can help you locate the clip to bind.

  

  7.) once you have located the clip, press OK and all the video files in your project and "A chronology" should be linked to the synchronized versions.

  I hope that makes sense! Only, you will know if this work around is to have to re - edit. Good luck!

  -Sean / first Bro